DFI TPC150-SD Bedienungs- und Wartungsanleitung

TPC150-SD Installation Guide

Package Contents

•

One 15" Touch Panel PC

•

One sheet of Poron foam

•

1 DVD disk includes:

- Manual

DFI reserves the right to change the speciﬁcations at any time prior to

the product's release. For the latest revision and more details of the

installation procedure, please refer to the user's manual on the website.

www.dﬁ.com

Top Panel

Top View

AC Power Socket

LAN1/LAN2

Power Switch

USB 3.0 Ports

DP++ Port

DVI-D Port

VGA Port

PS/2 Keyboard/Mouse Ports

Expansion Slots

COM Port

(RS232)

USB 2.0 Ports

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it

have been powered-off.

2. Disconnect all power cords and cables.

3. The 6 mounting screws on the bottom of the system are used to secure

the cover to the chassis. Remove these screws and put them in a safe

place for later use.

SODIMM socket

Mini PCIe socket

4. Lift the cover up to open the system.

5. The Mini PCIe and the SODIMM sockets are readily accessible after

removing the chassis cover.

Mounting screw

Installing a SATA Drive

1. Locate the SATA drive bay inside the system and remove the

mounting screws that secure the HDD bracekt to the drive bay.

2. Align the mounting holes of the SATA drive with the mounting holes on

the HDD bracket and then use the provided mounting screws to secure

the drive in place.

Mounting screws

The system can accomondate two SATA drives. Please use the following

procedure to install SATA drives into the system.

HDD bracket

SATA drive

Mounting screw

SATA drive bay

HDD bracket

Bracket screw

3. Place the SATA drive (with the HDD bracket) back into the system. Align

the mounting holes on the HDD bracket with the mounting holes on the

SATA drive bay and then use the provided mounting screws to secure

the drive in place.

4. Connect one end to the SATA data connector of the SATA drive and

the other end to the SATA data port on the system board. Connect the

SATA power connector from the PSU to the SATA power connector.

Mounting screw

SATA data port

SATA data connector

SATA power connector

Installing a Mini PCIe Card

The system board is equipped with one Mini PCIe slot that supports

mSATA and PCIe interfaces. Use the following procedure to install a Mini

PCIe card:

Align the notch in the connector of the PCIe card with the key in the

connector on the system board and use the provided mounting screws to

secure the card on the system board.

Mini PCIe card

Mounting screw

Note:

The Mini PCIe socket supports PCIe and SATA signals and can accommodate

common mobile broadband and storage modules. For jumper settings on switching

the signal betwen SATA and PCIe, refer to "Board Layout and Jumper Settings."

The PCIe slot on the riser card inside the system is used to install expansion

cards. Use the following procedure to install a Mini PCIe card:

Note: The system provides two optioanl riser cards to accommodate different types

of PCIe expansion slots:

The riser card

(DFI model: T100-2E)

provides 2 x PCIe Gen3 x8 expansion slots

whereas the riser card

(DFI model: X100-2P1M)

provides two PCI and one Mini

PCIe slots.

1. Remove the slot plate and bracket by removing the screws on the

front chassis.

2. Insert the expansion card into the PCIe slot on the riser card. Ensure the

card is properly seated into the slot.

Installing a PCIe Expansion Card

PCIe slot

Slot plate

bracket and screws

Front View

3. Install the bracket to secure the PCIe card in place.

The VESA mount kit includes the following:

• 2 VESA mount brackets

• Bracket screws

1. Select a place on the wall where you will mount the Panel PC.

2. Use the provided mounting screws to attach “VESA mount bracket 1” to

the wall.

Mounting Options

VESA mount

VESA mount bracket 1 VESA mount bracket 2

VESA mount bracket 1

Mounting screw

3. Attach the other bracket (VESA mount bracket 2) to the rear of

the Panel PC.

4. Slide the Panel PC to "VESA mount bracket 1" to attach the two brackets

with the hooks. Then tighten the screw to secure the assembly in place.

Screw

VESA mount bracket 2

Hooks

Mounting screw

Andere Handbücher für TPC150-SD

Inhaltsverzeichnis

Andere DFI Touchscreen Handbücher

DFI

DFI KS070-FS Bedienungsanleitung

DFI

DFI KS104-CD Bedienungsanleitung

DFI

DFI KS200 Bedienungsanleitung

DFI

DFI KS070-AL Bedienungsanleitung

DFI

DFI KS210-IMX6 Bedienungsanleitung

DFI

DFI TPC170 Installationsanleitung

DFI

DFI BPC370-BW Bedienungsanleitung

DFI

DFI TPC150-SD Bedienungsanleitung

DFI

DFI TPC121 Installationsanleitung

DFI

DFI VP070-M8M Bedienungsanleitung

DFI

DFI VP101-BT Bedienungsanleitung

DFI

DFI KS057R-FS Bedienungsanleitung

DFI

DFI TPC150 Installationsanleitung

DFI

DFI KS310-IMX6 Bedienungsanleitung

DFI

DFI KS070-BT Bedienungsanleitung

DFI

DFI VS436 (15") Bedienungsanleitung

DFI

DFI KS150-BT Bedienungsanleitung

DFI

DFI KS070-ALE39P Bedienungsanleitung

DFI

DFI KS101-BT Bedienungsanleitung

DFI

DFI TPC121 Bedienungsanleitung

DFI

DFI VS 15 Bedienungsanleitung

DFI

DFI TPC121 Bedienungsanleitung

DFI

DFI KS070-AL Bedienungsanleitung

DFI

DFI KS070-BT Bedienungsanleitung

Beliebte Touchscreen Handbücher anderer Marken

FlowLine

FlowLine Data loop Bedienungsanleitung

ALPEX

ALPEX AEx-8 P Series Bedienungsanleitung

Ltech

Ltech E5S Bedienungsanleitung

Harman

Harman AMX MODERO S MSD-701-L2 Bedienungsanleitung

Acnodes

Acnodes PC 1150 Bedienungsanleitung

AIS

AIS IP10IA99 series Bedienungsanleitung

IBASE Technology

IBASE Technology ASTUT-152-RE1S Bedienungsanleitung

YASKAWA

YASKAWA TP 610C Bedienungsanleitung

B&R

B&R Power Panel C Series Bedienungsanleitung

Beijer Electronics

Beijer Electronics X2 control Bedienungsanleitung

AXIOMTEK

AXIOMTEK GOT321W-521 Bedienungsanleitung

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Bedienungsanleitung

Qomo

Qomo QIT1386 Bedienungsanleitung

AMX

AMX AXP-PPC Leitfaden

Sartorius

Sartorius X3 PR 5410 Bedienungsanleitung

AMX

AMX Modero X Series Bedienungsanleitung

Advantech

Advantech TPC-30 Series Bedienungsanleitung

B&R Industries

B&R Industries MAPPC900-ENG Bedienungsanleitung