Digi XBee XTC Bedienungsanleitung

XBee/XBee-PRO XTC

Radio Frequency (RF) Module

User Guide

Revision history

900001476 B

Revision Date Description

A December,

2015

Baseline release of the document.

B January,

2016

Removed a section on shutdown mode, which does not apply to this device.

Removed a duplicate drawing. Removed pending comment on US and

Canadian certifications.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States

and other countries worldwide. All other trademarks mentioned in this document are the property of their

respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a commitment

on the part of Digi International. Digi provides this document “as is,” without warranty of any kind,

expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for

a particular purpose. Digi may make improvements and/or changes in this manual or in the product(s)

and/or the program(s) described in this manual at any time.

Warranty

To view the product's warranty information, go to the following website:

http://www.digi.com/howtobuy/terms

Customer support

Digi offers multiple technical support plans and service packages to help our customers get the most out

of their Digi product. For information on Technical Support plans and pricing, contact us at 952.912.3456 or

visit us at www.digi.com/support.

Telephone (8:00 am — 5:00 pm U.S. Central Time):

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 2

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 3

Toll-free US and Canada: 866.912.3444

Worldwide: +1 952.912.3456

Online: www.digi.com/support/eservice

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 4

Contents

Revision history 2

The XBee/XBee-PRO XTend Compatible (XTC) RF module

About the XTCRF module 10

Applicable firmware 10

Technical specifications 11

Performance specifications 11

Power requirements 12

Networking and security specifications 13

Physical specifications 13

Regulatory approvals 14

Hardware

Mechanical drawings 15

Pin signals 16

Recommended pin connections 18

Modes

Transparent and API operating modes 19

Transparent operating mode 19

API operating mode 19

Additional modes 19

Command mode 20

Binary Command mode 20

Idle mode 20

Receive mode 20

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 5

Sleep modes 20

Transmit mode 21

Enter Command mode 21

Send AT commands 21

Exit Command mode 22

Enter Binary Command mode 22

Exit Binary Command mode 22

Binary Command mode FAQs 22

Sleep modes 23

Pin Sleep (SM = 1) 24

Serial Port Sleep (SM = 2) 25

Cyclic Sleep Mode (SM = 4-8) 25

Operation

Serial interface 27

UART data flow 27

Serial data 27

Flow control 28

Data In (DIN) buffer and flow control 28

Data Out (DO) buffer and flow control 29

Configure the XTC RF Module

Configure the device using XCTU 31

Program the XTC RF Module

XTC RF Module programming examples 32

Connect the device to a PC 32

Modify a device address 33

Restore device defaults 33

Send binary commands 33

Query binary commands 34

XTC RF Module commands

Command mode options 39

AT (Guard Time After) 39

BT (Guard Time Before) 39

CC (Command Sequence Character) 40

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 6

CF (Number Base) 40

CN (Exit Command Mode) 41

CT (Command Mode Timeout) 42

E0 (Echo Off) 42

E1 (Echo On) 43

Diagnostic commands 43

%V (Board Voltage) 43

DB (Received Signal Strength) 44

GD (Receive Good Count) 45

HV (Hardware Version) 46

RC (Ambient Power - Single Channel) 46

RE (Restore Defaults) 47

RM (Ambient Power) 48

RP (RSSI PWM Timer) 49

SH (Serial Number High) 50

SL (Serial Number Low) 50

TP (Board Temperature) 51

TR (Transmit Error Count) 51

VL (Firmware Version - Verbose) 52

VR (Firmware Version - Short) 52

WA (Active Warning Numbers) 53

WN (Warning Data) 54

WS (Sticky Warning Numbers) 56

MAC/PHY commands 56

AM (Auto-set MY) 56

DT (Destination Address) 57

HP (Preamble ID) 58

ID (Network ID) 58

MK (Address Mask) 59

MT (Multi-transmit) 59

MY (Source Address) 60

RN (Delay Slots) 61

RR (Retries) 62

TT (Streaming Limit) 62

RF interfacing commands 63

BR (RF Data Rate) 63

FS (Forced Synch Time) 64

MD (RF Mode) 64

PB (Polling Begin Address) 65

PD (Minimum Polling Delay) 66

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 7

PE (Polling End Address) 66

PK (Maximum RF Packet Size) 67

PL (TX Power Level) 69

TX (Transmit Only) 70

Security commands 71

KY (AES Encryption Key) 71

Serial interfacing commands 72

AP (API Enable) 72

BD (Interface Data Rate) 72

CD (GP02 Configuration) 74

CS (GP01 Configuration) 75

FL (Software Flow Control) 76

FT (Flow Control Threshold) 77

NB (Parity) 77

RB (Packetization Threshold) 78

RO (Packetization Timeout) 79

RT (GPI1 Configuration) 79

SB (Stop Bits) 80

Sleep commands 81

FH (Force Wakeup Initializer) 81

HT (Time before Wake-up Initializer) 81

LH (Wakeup Initializer Timer) 82

PW (Pin Wakeup) 83

SM (Sleep Mode) 84

ST (Time before Sleep) 85

XTC RF ModuleSpecial commands 86

WR (Write) 86

XTC RF Module API operation

API mode overview 87

API frame specifications 87

Calculate and verify checksums 90

Escaped characters in API frames 90

XTC RF ModuleAPI frame overview 92

RF Module Status 0x8A 92

Transmit Request: 16-bit address 0x01 93

Transmit Status frame 0x89 95

Receive Packet: 16-bit address 0x81 96

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 8

Network configurations

network topologies 99

Point-to-point networks 99

Point-to-multipoint networks 100

Peer to peer networks 101

Addressing 102

Address recognition 102

Basic communications 103

Streaming mode (default) 103

Multi-transmit mode 104

Repeater mode 105

Polling mode (basic) 110

Acknowledged communications: Acknowledged mode 112

Acknowledged mode connection sequence 113

Polling mode (acknowledged) 114

Certifications

FCC (United States) 116

OEM labeling requirements 116

FCC notices 117

FCC antenna certifications 117

XBee-PRO XTC Antenna options 118

XBee XTC antenna options 126

Industry Canada (IC) 134

Labeling requirements 135

Transmitters for detachable antennas 135

Detachable antennas 135

ACMA (Australia) 136

Power requirements 136

PCB design and manufacturing

Recommended footprint and keepout 137

Design notes 139

Host board design 139

Improve antenna performance 139

RF pad version 139

Recommended solder reflow cycle 142

Flux and cleaning 143

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 9

Rework 143

XBee/XBee-PRO XTend Compatible (XTC) RF Module User Guide 10

The XBee/XBee-PRO XTend Compatible (XTC) RF

module

About the XTCRF module

The XBee/XBee-PRO XTend Compatible (XTC) RF module provides a radio frequency (RF) solution for the

reliable delivery of critical data between remote devices. It is a 30 dBm (1 Watt) long-range original

equipment manufacturer (OEM) device. We also offer a low power version of this module that offers

transmit power adjustable up to 13 dBm.

The XTC module uses Frequency Hopping Spread Spectrum (FHSS) agility to avoid interference by hopping

to a new frequency on every packet transmission or re-transmission. Its transmit power is software

adjustable up to 30 dBm, which is the maximum output power allowable by governments that use 900

MHz as a license-free band. The XTC module is approved for use in the United States, Canada, Australia

and other countries.

The XTC transfers a standard asynchronous serial data stream, operates within the ISM 900 MHz

frequency band and offers two RF data rates of 10 kb/s and 125 kb/s.

As the name suggests, the XTC is over-the-air compatible with Digi's XTend module. The XTC is not a drop-

in replacement for the XTend. If you require form factor compatibility, you must use the XTend vB RF

Module.

For new applications, we recommend that you use the XBee/XBee-Pro SX module. It uses the same

hardware as the XTC but we optimize the firmware for the best range and interference immunity.

However, it is not over-the-air compatible with the XTend.

Applicable firmware

This manual supports the following firmware:

l0x200X for XTC Hopping

Andere Handbücher für XBee XTC

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digi Steuereinheit Handbücher

Digi

Digi Digi Conntect ME Anwendungshandbuch

Digi

Digi RabbitCore RCM2100 Series Bedienungsanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi ConnectCore 6UL Kurzanleitung

Digi

Digi XBee3 DigiMesh 2.4 Bedienungsanleitung

Digi

Digi 5400-RM Bedienungsanleitung

Digi

Digi XBee-PRO XSC Bedienungsanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi XLR PRO Bedienungsanleitung

Digi

Digi XBee SX 868 Bedienungsanleitung

Digi

Digi XBee 3802.15.4 Bedienungsanleitung

Digi

Digi XBee ZigBee S2C Bedienungsanleitung

Digi

Digi Connect Wi-Wave 802.11 b/g Anwendungshandbuch

Digi

Digi Digi Connect EM DC-EM02T-JT Anwendungshandbuch

Digi

Digi XBee3-PRO Micro Kurzanleitung

Digi

Digi ConnectCore Kurzanleitung

Digi

Digi ConnectCore Wi-9P 9215 Anwendungshandbuch

Digi

Digi RabbitCore RCM4000 Bedienungsanleitung

Digi

Digi Connect Series Benutzerhandbuch

Digi

Digi INFOTAG 2.13 Bedienungsanleitung

Digi

Digi XBee S2C 802.15.4 Bedienungsanleitung

Digi

Digi XBee Bedienungsanleitung

Digi

Digi XBee ZigBee S2D Bedienungsanleitung

Digi

Digi ConnectCore 6 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung