Digi IX14 Bedienungsanleitung

IX14

User Guide

Firmware version 22.2

Revision history—90002291

Revision Date Description

H March 2021 Release of Digi IX14 firmware version 21.2:

nLocation services added, including:

lThe ability to define a static latitude and longitude

as a location for the device.

lReporting location information as health metrics to

Digi Remote Manager.

lGeo-fencing: Allow you to define one or more

circular or polygonal geo-fence areas and then

perform a set of actions when the device enters or

leaves that area.

lPython support for location information through

the digidevice.location python module.

nCellular modem carrier scanning and locking:

lNew modem scan CLI command for listing

available carriers for the current modem and SIM.

lManual carrier selection option to allow you to lock

the SIM to a specific carrier.

nEnhanced serial support:

lCertificate management control for TCP and

autoconnect serial port setups.

lAutoconnect.

nLocal RESTAPI for automated configuration of the

device.

nSupport for remote CLI commands through Digi

Remote Manager.

nSupport for automatically checking for device and

modem firmware updates.

J June 2021 Release of Digi IX14 firmware version 21.5:

nWi-Fi enhancements:

lAdded support for WPA3 Wi-Fi encryption:

oWPA2/WPA3 Personal

IX14 User Guide 2

Revision history—90002291

IX14 User Guide 3

Revision Date Description

oWPA3 Enhanced Open

oWPA3 Personal

lAdded support for WPA and WPA/WPA2 mised

mode with TKIP.

nCellular enhancements:

lAdded support for modem firmware update to the

Admin CLI.

lAdded support for over-the-air (OTA) modem

firmware update to check, list, and update to new

modem firmware from the Digi firmware server.

lAdded the ability to scan for cellular carriers on the

Modem status page and the ability select a

particular PLMN/network to use.

nAdded commands for over-the-air (OTA) system

firmware update to check, list, and update to new

firmware from the Digi firmware server.

nAdded a show dns command to the Admin CLI to

display active DNS servers and their associated

interface.

nAdded a show ntp command to the Admin CLI to

display the status of the NTP service.

nExpanded Port forwarding option to support a range of

ports, including one-to-one and many-to-one port

mappings.

nAdded options to control packet filtering for the

network analyzer.

nVPN enhancements:

lIPsec enhancements:

oAdded support for multiple remote endpoints

and the ability to use round-robin or to

randomly select an endpoint to establish a

tunnel to.

oAdded configurable options to control IKE

transmit interval, tunnel retry interval, and

tunnel retry timeout.

lLDAP enhancements:

oAdded a login attribute to provide the ability to

match the attribute set on an Active Directory

server.

nSureLink enhancements

lAdded the ability to configure how many times a

SureLink test must run, and must fail, before the

Revision history—90002291

IX14 User Guide 4

Revision Date Description

interface is restarted or the device is rebooted.

lAdded the ability to configure how many times a

SureLink test must pass before an interface is

considered to be working.

lAdded the ability to test another interface's status.

nSNMPv2 supported added.

nSimple Certificate Enrollment Protocol (SCEP)

supported added.

nUpdated python to version 3.6.13.

nAdded the default digi.device local domain.

K September 2021 Release of Digi IX14 firmware version 21.8:

nAdded LXC container support for running localized

containers on the device.

nAdded support for maintenance windows triggers to

control when a device is available for Digi Remote

Manager maintenance activity.

nVPNenhancements:

lAdded support for L2TPv3 tunneling.

lNew option to enable, disable, or force IPsec IKE

fragmentation.

nImproved options for creating a custom default

configuration:

lsystem backup CLI commands for generating a

custom default config file based on the active

config settings on the device.

lNew section on the File System page of the Web UI

for loading a configuration backup file as the

custom default config

lNew persistent files folder accessible through Digi

Remote Manager where users can upload a

configuration backup.

lAdded ability to clear a custom default

configuration by performing by pressing the RESET

button, waiting for the device to reboot, then

pressing the RESET again.

nAdded ability to override or edit SSH server options.

nAdded options for filtering Wi-Fi scanner results based

off of MAC addresses or RSSI signal strength.

nAdded options for sending local device event logs to

Digi Remote Manager.

nNew system time CLI command for manually setting

Revision history—90002291

IX14 User Guide 5

Revision Date Description

the local date and time.

nNew firewall packet filter options to allow/deny

packets based off of a range of source or destination

MAC addresses.

nNew monitoring metrics upload CLI command to

send on-demand health metrics to Digi Remote

Manager.

nAdded support for the configuration of custom scripts

that will be run manually, and a new system script

start CLI command to run manual scripts.

nNew "Find me" feature that flashes cellular-related

LEDs to help locate the device onsite and a new

system find-me command.

nAdded datapoint.upload_multiple function to

digidevice python module for uploading multiple

datapoints to DigiRM at once.

nAdded clear dhcp-lease command to remove all

dynamic DHCP leases or certain DHCP leases based on

MAC address or IP address.

nAdded speedtest command for performing on-demand

iPerf or nuttcp speedtests.

nLocal users are now required to be assigned to an

authentication group.

nNew Network → Advanced → Sequential DHCP address

allocation configuration setting for controlling if DHCP

addresses are assigned sequentially or randomly

(disabled by default).

nAdded ability to control if DHCP addresses are assigned

sequentially or randomly (disabled by default).

nAdded 802.1x port-based network access control,

configurable per network interface.

L December 2021 Release of Digi IX14 firmware version 21.11:

nConfiguration option to allow for automatic update of

new firmware (disabled by default).

nUser authentication enhancements:

lAdded TACACS+ command authorization and

accounting for Admin CLI commands.

lAdded a new username alias to provide an

alternate username that allows for special

characters in the username.

nVPNenhancements:

lAdded support for PPP-over-L2TP tunnels.

Revision history—90002291

IX14 User Guide 6

Revision Date Description

lChanged default IPsec IKE DH group to 14 for

enhanced compatibility with industry standard

settings.

nLocation services enhancements:

lNew option for Location service to specify the

talker ID used in NMEA mesage strings.

lInclude the mode indicator field in NMEA messages

constructed when a GPS fix isn’t obtained.

nSureLink enhancments:

lAdded new settings under cellular Surelink options

to have the device reset the cellular modem if a

specified number of Surelink tests fail

lAdded show surelink Admin CLI command.

nSerial port enhancements:

lNew option to add and configure an external USB-

to-serial adapter.

lDisable serial history in remote access mode by

default.

nSupport for sending analog and digial I/O health

metrics to Digi Remote Manager.

nAdded show containers Admin CLI command.

M March 2022 Release of Digi IX14 firmware version 22.2:

nVPNenhancements:

lRenamed VPN >IPsec >Tunnels >Policies >Local

network setting to Local traffic selector and

added Remote traffic selector.

lAdded a Dynamic option to the Local traffic

selector to configuration of a local network by

protocol and/or port instead of a network address

range.

lAdded Protocol and Port match criteria for Local

traffic selector and Remote traffic selector.

lAdded VPN >IPsec >Advanced >Debug level to

specify the logging verbosity of IPsec messages in

the device system logs.

nEnhancements to communications with Digi Remote

Manager:

lEnhanced security for communications with Digi

Remote Manager by using client-side certificates.

lThe default URL for the device's Remote Manager

connection is now edp12.devicecloud.com. This

Revision history—90002291

IX14 User Guide 7

Revision Date Description

URL is required to utilize the client-side certificate

support.

nNew Switch SIM SureLink action for WWAN interfaces,

which allows SureLink to be configured to switch to the

alternate SIM if the modem is connected but SureLink

test are failing.

lNew Switch SIM fail count option to determine

how many SureLink failures are required prior to

switching to the alternate SIM.

nNew Socket ID string option to send the configured

text to the remote server(s) when a TCP socket

connection is opened to the serial port.

nNew cat Admin CLI command for displaying file

contents.

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States

and other countries worldwide. All other trademarks mentioned in this document are the property of

their respective owners.

Disclaimers

Information in this document is subject to change without notice and does not represent a

commitment on the part of Digi International. Digi provides this document “as is,” without warranty of

any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or

merchantability for a particular purpose. Digi may make improvements and/or changes in this manual

or in the product(s) and/or the program(s) described in this manual at any time.

Warranty

To view product warranty information, go to the following website:

www.digi.com/howtobuy/terms

Customer support

Gather support information: Before contacting Digi technical support for help, gather the following

information:

Product name and model

Product serial number (s)

Firmware version

Operating system/browser (if applicable)

Logs (from time of reported issue)

Trace (if possible)

Revision history—90002291

IX14 User Guide 8

Description of issue

Steps to reproduce

Contact Digi technical support: Digi offers multiple technical support plans and service packages.

Feedback

To provide feedback on this document, email your comments to

[email protected]

Include the document title and part number (IX14 User Guide, 90002291 K) in the subject line of your

email.

Contents

Revision history—90002291 2

What's new in Digi IX14 version 22.2

Digi IX14 Quick start

Step 1: What's in the box 20

Step 2: Gather accessories 20

Step 3: Connect hardware 21

Step 4: Sign up for Digi Remote Manager 22

Step 5: Access the IX14 local web interface 22

Step 6: Configure cellular connection using the web interface 23

Step 7: Add your IX14 to your Digi Remote Manager account 23

Next steps 23

Reset the device to factory defaults

Digi IX14 hardware reference

IX14 features and specifications 25

IX14 front view 25

IX14 back view 25

IX14 power supply requirements 26

IX14 LEDs 26

Digi IX14 serial connector pinout 27

IX14 accessory kits 28

IX14 antennas 28

Hardware setup

Install SIM cards 30

Apply Dielectric Grease over SIMContacts 30

Attach and position antennas 31

Connect the WAN/ETH1 port 32

Connect the serial port 32

Power on the IX14 32

QR code definition 32

IX14 User Guide 9

IX14 User Guide 10

Configuration and management

Review IX14 default settings 34

Change the default password for the admin user 34

Configuration methods 36

Using Digi Remote Manager 37

Access Digi Remote Manager 37

Using the web interface 37

Log out of the web interface 38

Use the local RESTAPI to configure the IX14 device 38

Use the GETmethod to return device configuration information 39

Use the POST method to modify device configuration parameters and list arrays 41

Use the DELETE method to remove items from a list array 41

Using the command line 43

Access the command line interface 43

Exit the command line interface 44

Initial configuration

Configure cellular modem APNs 47

Change the default LAN subnet 51

Change the LAN address type 52

Configure SIM PIN 54

Configure system settings 54

Enable or disable Bluetooth service 61

Interfaces

Wireless Wide Area Networks (WWANs) 66

Configure SureLink active recovery to detect modem failures 66

Configure the device to reboot when a failure is detected 76

Disable SureLink 84

Using cellular modems in a Wireless WAN (WWAN) 88

Configure a Wireless Wide Area Network (WWAN) 105

Show WWAN status and statistics 114

Delete a WWAN. 116

Local Area Networks (LANs) 119

About Local Area Networks (LANs) 120

Configure a LAN 120

Show LAN status and statistics 127

Delete a LAN 129

DHCP servers 131

Create a Virtual LAN (VLAN) route 147

Show Surelink status and statistics 149

Show Surelink status for all interfaces 149

Show Surelink status for a specific interface 149

Show Surelink status for all IPsec tunnels 150

Show Surelink status for a specific IPsec tunnel 150

Show Surelink status for all OpenVPN clients 151

Show Surelink status for a specific OpenVPN client 151

Serial port 153

Default serial port configuration 153

Serial mode options 153

Andere Handbücher für IX14

Inhaltsverzeichnis

Andere Digi Netzwerk-Router Handbücher

Digi

Digi TransPort WR41 Bedienungsanleitung

Digi

Digi TransPort LR54-AA401 Bedienungsanleitung

Digi

Digi AnywhereUSB Series Bedienungsanleitung

Digi

Digi TransPort Bedienungsanleitung

Digi

Digi TransPort WR64 Anwendungshandbuch

Digi

Digi IX40 Bedienungsanleitung

Digi

Digi ConnectPort X2e ZB Bedienungsanleitung

Digi

Digi XPress Bedienungsanleitung

Digi

Digi IX10 Bedienungsanleitung

Digi

Digi XLR PRO Bedienungsanleitung

Digi

Digi TX64 Bedienungsanleitung

Digi

Digi TransPort WR44 v2 Bedienungsanleitung

Digi

Digi Connect Series Benutzerhandbuch

Digi

Digi TransPort WR21 Bedienungsanleitung

Digi

Digi TransPort WR64 Bedienungsanleitung

Digi

Digi TransPort LR54 Bedienungsanleitung

Digi

Digi TransPort LR54 Bedienungsanleitung

Digi

Digi Connect EZ 4 Bedienungsanleitung

Digi

Digi WR44v1 Bedienungsanleitung

Digi

Digi TransPort WR11 XT Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Digi

Digi SR44-E Bedienungsanleitung

Digi

Digi Connect IT 4 Bedienungsanleitung

Digi

Digi ConnectPort X2e ZB Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung