Digi Connect Series Benutzerhandbuch
Digi Connect® Family Application Guide
How to Create a VPN between Digi Connect and Sonicwall
________________________________________________________________________
5/15/2009 Digi International 1 of 6
Scenario
Digi Connect family VPN router (for example ConnectPort WAN or Digi Connect WAN
IA) is used for remote site connectivity. The primate site is using a Sonicwall VPN
appliance. The two networks need to be connected, and the data needs to be encrypted
between them.
Theory of Operation
A remote location needs to be able to build a secure tunnel between the main site and a
remote branch. One location is using a Digi Connect router to provide primary internet
connectivity. The location is using a Sonicwall router for primary site connectivity.
AVPN tunnel will be created to the Digi Connect router, creating a secure connection for
data to pass through.
Sample Diagram
Internet Cloud
Digi Connect
WAN IP: 1.2.3.4
LAN IP: 192.168.1.1 Sonicwall
WAN IP: 5.6.7.8
LAN IP: 172.16.1.1
PCs, PLCs, Servers, Etc.
PCs, PLCs, Servers, Etc.
Carrier Plan and PC / VPN Appliance Requirements
Digi Connect Router Requirements: Firmware version must be 2.8 or later. To
download the latest firmware, go to http://www.digi.com/support.
GSM GPRS/EDGE APN Type needed: VPN and GRE end-points usually require static
(persistent) IP addresses and must support mobile terminated data connections. If mobile
termination is not an option with your current APN, you will need to acquire a new one
that does support mobile termination.
CDMA networks may also require special plans to provide static IP addresses and
support mobile terminated data connections.
Check with your wireless provider on the available plan types.
Digi Connect Family Application Guide –Connect WAN to Sonicwall
5/15/2009 Digi International 2 of 6
Digi Connect Router Configuration
1. Read and follow the quick-start guide for the Digi Connect router and optionally for
Digi Connectware® Manager if used.
2. Assign a static IP address to the Ethernet port (the default address is 192.168.1.1).
Note the default gateway may show or change to an address such as 10.6.6.6. This is
normal as it is the cellular provider’s network default gateway.
3. Configure the Digi Connect router settings
a. VPN Policy Settings
i. Click on VPN Policy Settings.
ii. Click on the Add button to setup the individual tunnel.
iii. Fill in the appropriate information, shown in the following
screenshots:
Digi Connect Family Application Guide –Connect WAN to Sonicwall
5/15/2009 Digi International 3 of 6
iv. Click Apply after filling in the above information to complete the
tunnel setup on the Digi Connect router.
Digi Connect Family Application Guide –Connect WAN to Sonicwall
5/15/2009 Digi International 4 of 6
Sonicwall VPN Configuration
1. Configure the Sonicwall VPN device
a. Log into the Web Interface of the Sonicwall device.
b. Navigate to VPN on the left hand panel.
c. Under the section titled VPN Policies, click the Add button.
d. Fill in the appropriate information, shown in the screenshots below
Digi Connect Family Application Guide –Connect WAN to Sonicwall
5/15/2009 Digi International 5 of 6
e. Click OK to save the settings.
f. Click Apply in the upper right hand corner to apply the settings to the
device. You may have to reboot the device for these changes to take
effect, depending on your model of Sonicwall.
Digi Connect Family Application Guide –Connect WAN to Sonicwall
5/15/2009 Digi International 6 of 6
ADDITIONAL NOTES
1. This configuration will work with Dynamic IP addresses, using hostnames
established with DynDNS.org, or using the DDNS update feature of Digi
Connectware® Manager. When using a Dynamic IP address, you will need to set the
VPN tunnel to use Aggressive Mode to make the connection work.
2. This configuration will work with other VPN parameters than what is listed in the
screenshots. i.e. –DES, 3DES, AES 192-bit, AES 256-bit, etc.
3. This configuration will work with other Digi Cellular products, such as the Connect
WAN, Connect WAN 3G, and ConnectPort WAN VPN series of products that
support VPN connections.
Where to Get More Information
Refer to the Digi Wi-Point 3G user documentation and Digi technical support website at
www.digi.com/support for more information. Technical assistance is available at
http://www.digi.com/support/eservice/eservicelogin.jsp.
For sales and product information, please contact Digi International at 952-912-3444 or
refer to the Digi Cellular wireless pages at www.digi.com.
Andere Handbücher für Connect Series
3
Dieses Handbuch passt für folgende Modelle
6
Inhaltsverzeichnis
Andere Digi Netzwerk-Router Handbücher
Digi
Digi AnywhereUSB Series Bedienungsanleitung
Digi
Digi Connect EZ 4 Bedienungsanleitung
Digi
Digi Transport DR64-H Bedienungsanleitung
Digi
Digi IX14 Bedienungsanleitung
Digi
Digi ConnectPort X4 Bedienungsanleitung
Digi
Digi TX54 Bedienungsanleitung
Digi
Digi TX64 Bedienungsanleitung
Digi
Digi ConnectPort X2e ZB Bedienungsanleitung
Digi
Digi TransPort WR41 Bedienungsanleitung
Digi
Digi IX20 Bedienungsanleitung
Digi
Digi SR44-E Bedienungsanleitung
Digi
Digi TransPort WR41 Bedienungsanleitung
Digi
Digi TransPort WR11 XT Bedienungsanleitung
Digi
Digi TransPort WR44 RR Bedienungsanleitung
Digi
Digi TransPort WR64 Bedienungsanleitung
Digi
Digi XPress Bedienungsanleitung
Digi
Digi 6350-SR Bedienungsanleitung
Digi
Digi XPress Bedienungsanleitung
Digi
Digi TransPort WR64 Anwendungshandbuch
Digi
Digi TransPort WR11 Bedienungsanleitung
