Digilock NEXT Sola3 Keypad Bedienungsanleitung

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Lock Orientation - Views

Keys

Key Insertion

VerticalHorizontal - Handle on Left Horizontal - Handle on Right

User Key Manager Key1Programming Key2

Operates the lock ●●●

Overrides user access ●●

Allows access for management inspection ●●

Provides external power ●●

Assigns user credential ●

Sets lock functionality ●

1Up to 25 Manager Keys may be programmed to a lock. 21 Programming Key allowed per lock group.

Vertical Horizontal with Handle on the Right

Horizontal with Handle on the Left

Sola locks with a keypad interface are operated by a 4-digit User Code or by an ADA compliant User Key. Manager Keys provide management

access and external power. Programming is accomplished via a Programming Key unique to the lock system.

C Button Key Button

Key Slot

Alpha Numeric

Keypad

LED Usage Indicator

Shared Use

Assigned Use

Handle

SOLA can be installed vertically or horizontally for left or right handed conﬁguration.

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Setup

Handle Positions

Locks are shipped with factory default settings (only operates by pressing = `). Each lock must be set up to operate with a Programming

Key and Manager Keys.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will ﬂash.

While the LED is ﬂashing, insert

one Manager Key at a time.

A two-tone beep will be heard for

each Manager Key programmed.

While the LED is ﬂashing, insert

the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Repeat above steps for each lock

or follow instructions to Express

all locks.

1324

90º

180º

Locked

180º Counter-Clockwise

to unlock

90º Counter-Clockwise

to unlock

180º Clockwise

to unlock

90º Clockwise

to unlock

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Programming Instructions

Express Register Manager Keys

The Programming Key can quickly program multiple locks to operate with the same Manager Keys.

Go to the lock already programmed to operate with the Manager Keys.

Press

=` 66 `

The LED will ﬂash.

While the LED is ﬂashing, insert the Programming Key.

A two-tone beep will be heard and the LED will turn off.

At each lock to be programmed, insert the Programming Key.

A two-tone beep will be heard and the LED will ﬂash once to indicate

successful registration.

To end Express Registration mode:*

Go to any programmed lock.

Press = ` then insert the Programming Key.

*The Programming Key will continue to function in Express Registration mode until it is used to operate a lock.

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Programming Instructions

Add Manager Keys

Manager Keys can be programmed to the locks at any time.

Go to a lock requiring additional

Manager Keys.

Press =` 55 `.

The LED will ﬂash.

While the LED is ﬂashing, insert

the Programming Key.

A two-tone beep will be heard.

While the LED is ﬂashing, insert

each additional Manager Key one

at a time.

A two-tone beep will be heard for

each Manager Key programmed.

Insert the Programming Key.

A two-tone beep will be heard

and the LED will turn off.

Repeat above steps for each lock

or follow instructions to Express

program multiple locks to operate

with the same Manager Keys.

Replace Keys

The locks must be reprogrammed to prevent the lost/stolen keys from operating a lock.

To replace the Programming Key:

Note the order or serial number (found on the lock’s rear).

Contact Digilock Support to purchase a replacement Programming Key.

To replace the Manager Keys:

Collect all remaining and replacement Manager Keys.

Go to any lock operated by the lost/stolen Manager Keys.

Press =` 5 5 `. The LED will ﬂash.

While the LED is ﬂashing, insert the Programming Key.

A two-tone beep will be heard.

Insert the Programming Key again.

Three sets of two-tone beeps will be heard and the LED will turn off. All

previously programmed Manager Keys will be erased.

Follow instructions to Add Manager Keys to program the remaining and

replacement Manager Keys to the locks.

12 43

1a 1b

2a 2b

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Programming Instructions

Assign a User Code:

Default user code: 1 2 3 4

Press = ` then insert a valid Manager Key.

The LED will turn on.

Press =[any 4-digit code] `. A two-tone beep will be heard.

Press =[the same 4-digit code] `.

Two sets of two-tone beeps will be heard and the LED will turn off.

Set Lock Functionality

Each lock can be set for either shared or assigned use functionality. Press =to check functionality. If in shared use, LED is red. If in

assigned use, LED is green.

To set for assigned use:

Press =` 65 `.

The red LED will ﬂash.

While the LED is ﬂashing, insert

the Programming Key.

A two-tone beep will be heard

and the green LED will ﬂash once.

Assign the User Credential (for assigned use functionality only)

Make sure that the lock is set for assigned use functionality (a green LED will ﬂash when =is pressed). Once a user credential is assigned,

the previously assigned user credential will no longer operate the lock.

Assign a User Key:

Press = ` then insert a valid Manager Key.

The LED will turn on.

While the LED is on, insert a User Key.

A two-tone beep will be heard and the LED will turn off.

To set for shared use:

Press =` 56 `.

The green LED will ﬂash.

While the LED is ﬂashing, insert

the Programming Key.

A two-tone beep will be heard

and the red LED will ﬂash once.

2b1b

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Set Additional Lock Features (for shared use functionality only)

Auto Unlock

When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF

(does not auto unlock).

To turn on Auto Unlock:

Press =` 95 `.

The LED will ﬂash.

Insert the Programming Key.

A two-tone beep will be heard and the LED will turn on.

While the LED is on, enter the number of hours from 1 - 9 9 then

press `.

Two sets of two-tone beeps will be heard and the LED will turn off.

For example: Press 8 ` to set the lock to auto unlock after 8 hours.

To turn off Auto Unlock:

Press =` 94 `.

The LED will ﬂash.

While the LED is ﬂashing, insert the Programming Key.

A two-tone beep will be heard and the LED will turn off.

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Operating Instructions - In Shared Use Functionality

*After 3 consecutive incorrect User Code entries, the keypad will be disabled for 1 minute (Sleep Mode).

**If a valid Manager Key is used to relock, the previous user credential will continue to operate the lock.

1a 1b 2a 2b

2a 2b

In shared use functionality, the user enters a self-selected 4-digit User Code or inserts any User Key to lock and the same User Code or

User Key to unlock. Once unlocked, the lock is available for a different user.

Operate with a User Code

To lock: Close the door. Press =[any 4-digit code] `then turn the

handle to the locked position.

To unlock: Press =[the same 4-digit code] ` then turn the handle to the

unlocked position. Open the door.*

Operate with a Manager Key

To unlock: Insert a valid Manager Key then turn the handle to the

unlocked position. Open the door.

To relock: Close the door. Insert a valid Manager Key then turn the

handle to the locked position.**

Operate with a User Key

To lock: Close the door. Insert any User Key then turn the handle to the

locked position.

To unlock: Insert the same User Key then turn the handle to the

unlocked position. Open the door.

1a 1b

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Operating Instructions - In Assigned Use Functionality

*After 3 consecutive incorrect User Code entries, the keypad will be disabled for 1 minute (Sleep Mode).

†The lock will remain in the locked position if the handle is not turned within approximately 6 seconds.

In assigned use functionality, users operate the lock with their assigned user credential (either a User Code or a User Key). To reassign a

lock to a different user, follow instructions to Assign the User Credential.

1a 1b 2

Operate with the User Code

To unlock: Press =

[assigned 4-digit code]

` then turn the handle to the

unlocked position. Open the door.*

†

To relock: Close the door then turn the handle to the locked position.

Operate with a Manager Key

To unlock: Insert a valid Manager Key

then turn the handle to the

unlocked position. Open the door.†

To relock: Close the door then turn the handle to the locked position.

Operate with the User Key

To unlock: Insert the assigned User Key then turn the handle to the

unlocked position. Open the door.†

To relock: Close the door then turn the handle to the locked position.

1a 1b

Keypad

Key Managed

Shared & Assigned Use Functionality

Product Guide

Phone: 707 766 6000

www.digilock.com | [email protected]

PG-NLS3/P-K-KT/P-DEN

Support

Battery Replacement

Sleep Mode

After three consecutive incorrect User Code entries to unlock, the lock will enter Sleep Mode for one minute. For each subsequent incorrect

entry, the lock will remain in Sleep Mode for an additional minute. The keypad is disabled while in Sleep Mode. A valid Manager Key may be

used to unlock while the lock is in Sleep Mode.

Low Battery Indicator

After locking or unlocking, the lock emits two sets of three beeps indicating that the batteries are low. Replace the batteries.

Does not Unlock with the User Code or User Key

The lock does not recognize the User Code or User Key. For immediate access, operate with a valid Manager Key. If in assigned use

functionality, follow instructions to Assign the User Credential to assign a new User Code or User Key to the lock.

Does not Operate with a Manager Key

The lock does not recognize the Manager Key. Follow instructions to Add Manager Keys to program the Manager Key to the lock. For

immediate access, operate with another valid Manager Key.

Does not Operate with the Programming Key

The lock does not recognize the Programming Key. If the Programming Key has been replaced, operate with the Replacement

Programming Key. Contact Digilock support for additional assistance.

No Audible Feedback when =is Pressed

The lock may be in Sleep Mode or the batteries may need to be replaced. For immediate access, operate with a valid Manager Key.

Remove the 2 battery cover

plate screws.

Loosen the battery cover by inserting

a small ﬂat-head in either the top or

bottom notches of the cover plate.

Re-Insert the battery pack and

screw cover plate in place.

Pull the battery pack from the

front housing.

Remove batteries and replace

with two premium lithium

CR2450 batteries.

It is not necessary to uninstall the lock from the door.

In case of battery failure, operate with a valid Manager Key.

070318

Andere Handbücher für NEXT Sola3 Keypad

Inhaltsverzeichnis

Andere Digilock Sperren Handbücher

Digilock

Digilock DAK1-APS1 Bedienungsanleitung

Digilock

Digilock DCK1-APV1 Bedienungsanleitung

Digilock

Digilock DL330BT Bedienungsanleitung

Digilock

Digilock Lockup M Bedienungsanleitung

Digilock

Digilock DAR1-APV1 Bedienungsanleitung

Digilock

Digilock Numeris Versa Mini Bedienungsanleitung

Digilock

Digilock ADA User Key Betriebsanleitung

Digilock

Digilock ATS Bedienungsanleitung

Digilock

Digilock Next Mech Bedienungsanleitung

Digilock

Digilock Numeris Versa Bedienungsanleitung

Digilock

Digilock DCR1-APV1 Bedienungsanleitung

Digilock

Digilock numeris aspire Bedienungsanleitung

Digilock

Digilock Numeris Versa Standard Bedienungsanleitung

Digilock

Digilock DAR1-ATS1 Bedienungsanleitung

Digilock

Digilock DCR1-ATV1 Bedienungsanleitung

Digilock

Digilock Curve Bedienungsanleitung

Digilock

Digilock DK-APS 4G Betriebsanleitung

Digilock

Digilock NEXTLOCK CUE Series Bedienungsanleitung

Digilock

Digilock NEXT Sola3 Keypad Bedienungsanleitung

Digilock

Digilock Shared Use RFID Camlock Bedienungsanleitung

Digilock

Digilock NEXT Sola3 Touch RFID Bedienungsanleitung

Digilock

Digilock numeris aspire Bedienungsanleitung

Digilock

Digilock Next Mech Dial Combo Bedienungsanleitung

Digilock

Digilock Assigned Use RFID Camlock Bedienungsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung