Digisol DG-CS4554F Bedienungsanleitung

Page 1

10G Top-of-Rack Switches

DG-CS4554F

User Manual

V1.0

2015-10-20

As our products undergo continuous development the specifications are subject to change without prior notice.

Web Management Guide

DG-CS4554F

54-Port 10G Data Center Switch

with 48 10GBASE SFP+ Ports,

6 40GBASE QSFP Ports,

2 Power Supply Units,

and 5 Fan Trays (5 Fans –F2B and B2F Airflow)

How to Use This Guide

–3 –

This guide includes detailed information on the switch software, including how to

operate and use the management functions of the switch. To deploy this switch

effectively and ensure trouble-free operation, you should first read the relevant

sections in this guide so that you are familiar with all of its software features.

Who Should Read This

Guide?

This guide is for network administrators who are responsible for operating and

maintaining network equipment. The guide assumes a basic working knowledge of

LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network

Management Protocol (SNMP).

How This Guideis

Organized

This guide describes the switch’s web browser interface. For more detailed

information on the switch’s key features refer to the Administrator’s Guide.

The guide includes these sections:

◆

Section I “Getting Started” —Includes an introduction to switch management,

and the basic settings required to access the management interface.

◆

Section II “Web Configuration” —Includes all management options available

through the web browser interface.

◆

Section III “Appendices” —Includes information ontroubleshooting switch

management access.

Documentation

This guide focuses on switch software configuration through the web browser.

For information on how to manage the switch through the command line interface,

see the following guide:

CLIReferenceGuide

Note: For a description of how to initialize the switch for management access via

the CLI, web interface or SNMP, refer to “Initial Switch Configuration” in the CLI

Reference Guide.

How to Use ThisGuide

–4 –

For information on how to install the switch, see the following guide:

InstallationGuide

For all safety information and regulatory statements, see the following documents:

Quick StartGuide

Safety and Regulatory Information

Conventions The following conventions are used throughout this guide to show information:

Note: Emphasizes important information or calls your attention to related features

or instructions.

Caution: Alerts you to a potential hazard that could cause loss of data, or damage

the system or equipment.

Warning: Alerts you to a potential hazard that could cause personal injury.

Revision History This section summarizes the changes in each revision of this guide.

Nov 2015 Revision

This is the first version of this guide.

–5 –

Contents

How to Use This Guide

Contents

Figures

Tables

Section I

Getting Started

Introduction

Key Features

Description of Software Features

Equal-costMultipathLoad Balancing

System Defaults

Section II

Web Configuration

Using the Web Interface

Connecting to the Web Interface

Navigating the Web Browser Interface

Home Page

Configuration Options

PanelDisplay

Main Menu

Basic Management Tasks

DisplayingSystemInformation

Displaying Hardware/Software Versions

Configuring Support for Jumbo Frames

Displaying Bridge Extension Capabilities

–6 –

Contents

Managing System Files 60

Copying Files via FTP/TFTP or HTTP 60

Saving the Running Configuration to aLocal File 62

Setting The Start-Up File 63

Showing System Files 64

Automatic Operation Code Upgrade 65

Setting the System Clock 69

Setting the Time Manually 69

Setting the SNTP Polling Interval 70

Configuring NTP 71

Configuring Time Servers 72

Setting the Time Zone 75

Configuring The Console Port 76

Configuring Telnet Settings 78

Displaying CPU Utilization 80

Displaying Memory Utilization 80

Resetting the System 81

4 Interface Configuration 85

Port Configuration 85

Configuring by Port List 85

Configuring by Port Range 88

Displaying Connection Status 89

Configuring Local Port Mirroring 90

Showing Port or Trunk Statistics 92

Displaying Statistical History 96

Displaying Transceiver Data 100

Configuring Transceiver Thresholds 101

Trunk Configuration 103

Configuring a Static Trunk 104

Configuring a Dynamic Trunk 107

Displaying LACP Port Counters 113

Displaying LACP Settings and Status for the Local Side 114

Displaying LACP Settings and Status for the Remote Side 116

Configuring Load Balancing 117

–7 –

Contents

Traffic Segmentation 119

Enabling Traffic Segmentation 119

Configuring Uplink and Downlink Ports 120

VLAN Configuration 123

IEEE 802.1Q VLANs 123

Configuring VLAN Groups 125

Adding Static Members to VLANs 128

Address Table Settings 133

Configuring MAC Address Learning 133

Setting Static Addresses 135

Changing the Aging Time 136

Displaying the Dynamic Address Table 137

Clearing the Dynamic Address Table 138

Issuing MAC Address Traps 139

Spanning Tree Algorithm 141

Overview 141

Configuring Global Settings for STA 143

Displaying Global Settings for STA 148

Configuring Interface Settings for STA 149

Displaying Interface Settings for STA 152

Configuring Multiple Spanning Trees 155

Configuring Interface Settings for MSTP 159

Congestion Control 163

Storm Control 163

Class of Service 165

Layer 2 Queue Settings 165

Setting the Default Priority for Interfaces 165

Selecting the Queue Mode 166

Mapping CoS Values toEgress Queues 169

Layer 3/4 Priority Settings 172

Setting Priority Processing to IP Precedence/DSCP or CoS 172

Mapping Ingress DSCP Values to Internal DSCP Values 173

–8 –

Contents

Mapping CoS Priorities to Internal DSCP Values 176

Mapping Internal DSCP Values to Egress CoS Values 178

Mapping IP Precedence Values to Internal DSCP Values 180

Mapping IP Port Priority to Internal DSCP Values 182

Quality of Service 185

Overview 185

Configuring a Class Map 186

Creating QoS Policies 190

Attaching a Policy Map to a Port 199

Security Measures 201

AAA Authorization and Accounting 201

Configuring Local/Remote Logon Authentication

202

Configuring Remote Logon Authentication Servers 203

Configuring User Accounts 209

Configuring HTTPS 211

Configuring Global Settings for HTTPS 211

Replacing the Default Secure-site Certificate 212

Configuring the Secure Shell 214

Configuring the SSH Server 217

Generating the Host Key Pair 218

Importing User Public Keys 220

Access Control Lists 222

Setting A Time Range 223

Showing TCAM Utilization 226

Setting the ACL Name and Type 227

Configuring a Standard IPv4 ACL 229

Configuring an Extended IPv4 ACL 230

Configuring a Standard IPv6 ACL 232

Configuring an Extended IPv6 ACL 234

Configuring a MAC ACL 235

Binding a Port to an Access Control List 237

Filtering IP Addresses for Management Access 238

–9 –

Contents

Basic Administration Protocols 241

Configuring Event Logging 241

System Log Configuration 241

Remote Log Configuration 244

Link Layer Discovery Protocol 245

Setting LLDP Timing Attributes 245

Configuring LLDP Interface Attributes 247

Configuring LLDP Interface Civic-Address 251

Displaying LLDP Local Device Information 253

Displaying LLDP Remote Device Information 256

Displaying Device Statistics 264

Simple Network Management Protocol 266

Configuring Global Settings for SNMP 268

Setting the Local Engine ID 269

Specifying a Remote Engine ID 270

Setting SNMPv3 Views 271

Configuring SNMPv3 Groups 274

Setting Community Access Strings 278

Configuring Local SNMPv3 Users 279

Configuring Remote SNMPv3 Users 281

Specifying Trap Managers 284

Creating SNMP Notification Logs 288

Showing SNMP Statistics 290

Remote Monitoring 292

Configuring RMON Alarms 292

Configuring RMON Events 295

Configuring RMON History Samples 297

Configuring RMON Statistical Samples 300

UDLD Configuration 302

Configuring UDLD Protocol Intervals 303

Configuring UDLD Interface Settings 304

Displaying UDLD Neighbor Information 306

Multicast Filtering

309

Overview

309

Contents

–10 –

IGMP Protocol 310

Layer 2 IGMP (Snooping and Query for IPv4) 311

Configuring IGMP Snooping and Query Parameters 313

Specifying Static Interfaces for an IPv4 Multicast Router 316

Assigning Interfaces to IPv4 Multicast Services 319

Setting IGMP Snooping Status per Interface 320

Filtering IGMP Query Packets 326

Displaying Multicast Groups Discovered by IGMP Snooping 327

Displaying IGMP Snooping Statistics 328

Filtering and Throttling IGMP Groups 332

Enabling IGMP Filtering and Throttling 332

Configuring IGMP Filter Profiles 333

Configuring IGMP Filtering and Throttling for Interfaces 335

IP Configuration 339

Setting the Switch’s IP Address (IP Version 4) 339

Setting the Switch’s IP Address (IP Version 6) 343

Configuring the IPv6 Default Gateway 343

Configuring IPv6 Interface Settings 344

Configuring an IPv6 Address 348

Showing IPv6 Addresses 351

Showing the IPv6 Neighbor Cache 352

Showing IPv6 Statistics 353

Showing the MTU for Responding Destinations 360

IP Services 361

Dynamic Host Configuration Protocol 361

Specifying A DHCP Client Identifier 361

Configuring DHCP Relay Service 363

General IP Routing 365

Overview 365

Initial Configuration 365

IP Routing and Switching 366

Routing Path Management 367

Routing Protocols 368

Andere Handbücher für DG-CS4554F

Inhaltsverzeichnis

Andere Digisol Schalten Handbücher

Digisol

Digisol DG-GS4110 Bedienungsanleitung

Digisol

Digisol DG-GS1528HP/C Kurzanleitung

Digisol

Digisol DG-GS1526 Bedienungsanleitung

Digisol

Digisol DG-GS4600 SERIES Bedienungsanleitung

Digisol

Digisol DG-CS4616F Bedienungsanleitung

Digisol

Digisol DG-GS1510PL Bedienungsanleitung

Digisol

Digisol DG-GS1010PF-B Bedienungsanleitung

Digisol

Digisol MUSTANG 4000 DG-FS4528 Bedienungsanleitung

Digisol

Digisol DG-GS4824F Bedienungsanleitung

Digisol

Digisol DG-FS1526HP Bedienungsanleitung

Digisol

Digisol DG-GS4900 SERIES Bedienungsanleitung

Digisol

Digisol DG-GS1016D-A Bedienungsanleitung

Digisol

Digisol DG-GS4600SE2 Series Bedienungsanleitung

Digisol

Digisol DG-GS4200 Series Bedienungsanleitung

Digisol

Digisol DG-GS4826S Programmierhandbuch

Digisol

Digisol DG-GS4528SE Programmierhandbuch

Digisol

Digisol DG-FS4526E Programmierhandbuch

Digisol

Digisol DG-FS1510HPE Bedienungsanleitung

Digisol

Digisol DG-GS1528HP/C Bedienungsanleitung

Digisol

Digisol DG-GS4652S Bedienungsanleitung

Digisol

Digisol DG-FS4528P Programmierhandbuch

Digisol

Digisol DG-GS1528HP Bedienungsanleitung

Digisol

Digisol DG-FS1526 Bedienungsanleitung

Digisol

Digisol DG-GS4526P Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung