Digital Equipment VAXstation 4000/60 Bedienungs- und Montageanleitung

VAXstation4000Model60andVLC

CondensedServiceInformation

Order Number: EK-V466H-PS. A01

August 1992

This manual is a condensed version of the VAXstation 4000 Model 60

Service Information and VAXstation 4000 VLC Service Information guides.

The information in this manual supersedes the information in the original

Model 60 and VLC service guides.

Revision/Update Information: This is a new manual.

Digital Equipment Corporation

Maynard, Massachusetts

First Edition, August 1992

The software described in this document is furnished under a license and may be used or copied

only in accordance with the terms of such license.

No responsibility is assumed for the use or reliability of software on equipment that is not

supplied by Digital Equipment Corporation or its afﬁliated companies.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to

restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer

Software clause at DFARS 252.227-7013.

The following are trademarks of Digital Equipment Corporation: DEC, DECstation, Digital,

KA46, KA48, MS44-AA, MS44L-AL, MS44-CA, RRD42, RX26, RZ, TURBOchannel, ThinWire,

VAXELN, VAXstation, VAXstation 4000 VLC, VMS, and the DIGITAL logo.

Logitech is a registered trademark of Logitek, Inc.

Teﬂon is a registered trademark of E.I. Dupont de Nemours & Co.

This document was prepared using VAX DOCUMENT, Version 2.0.

Contents

About This Guide ............................................ xiii

1 System Conﬁguration

1.1 VAXstation 4000 Model 60/VLC System Box Overview ........ 1–2

1.2 Monitor and Graphics Modules .......................... 1–3

1.3 Power Supply ........................................ 1–7

1.4 Internal Cabling. . . ................................... 1–10

1.5 Control Panel ........................................ 1–10

1.6 I/O Connectors ....................................... 1–12

2 Diagnostic Testing

2.1 Diagnostic Functions .................................. 2–2

2.2 Power-Up Test ....................................... 2–2

2.2.1 Successful Power-Up and the HALT Command . .......... 2–3

2.2.2 Unsuccessful Power-Up . . ........................... 2–3

2.3 Displaying System Conﬁguration ......................... 2–4

2.3.1 SHOW DEVICE Command .......................... 2–4

2.3.2 SHOW CONFIG Command .......................... 2–5

2.4 Displaying Error Information. ........................... 2–7

2.5 Setting Up the Diagnostic Environment ................... 2–8

2.5.1 Selecting a Diagnostic Environment ................... 2–8

2.6 Device Tests ......................................... 2–10

2.7 Running Self-Tests . ................................... 2–11

2.7.1 Device Test Syntax Rules . ........................... 2–11

2.8 Descriptions of Self-Tests ............................... 2–12

2.8.1 TOY/NVR Self-Test (T 1) . ........................... 2–12

2.8.2 Graphics Self-Test (T 2) . . ........................... 2–13

2.8.3 DZ Self-Test (T 3) .................................. 2–14

2.8.4 Cache Self-Test (T 4) ............................... 2–16

2.8.5 Memory Self-Test (T 5) . . . ........................... 2–16

2.8.6 Floating-Point Unit Self-Test (T 6) . . ................... 2–17

iii

2.8.7 Interval Timer Self-Test (T 7) ........................ 2–17

2.8.8 System Self-Test (T 8) . . . ........................... 2–18

2.8.9 Network Interconnect Self-Test (T 9) ................... 2–18

2.8.10 SCSI Self-Test (T 10) ............................... 2–20

2.8.11 Audio Self-Test (T 11) ............................... 2–21

2.8.12 Synchronous Communication Self-Test (T 12) (Model 60

Only) ........................................... 2–21

2.8.13 TURBOchannel Adapter Self-Test (T 13) (Model 60 Only) . . . 2–22

2.9 Setting Up System Test Environments (Model 60 Only) ....... 2–23

2.10 System Test Monitor (Model 60 Only) . . ................... 2–24

2.10.1 Display from the System Test ........................ 2–25

2.11 Descriptions of System Tests . ........................... 2–27

2.11.1 DZ System Test (Model 60 Only) . . . ................... 2–28

2.11.2 Network Interconnect System Test (Model 60 Only) ....... 2–30

2.11.3 SCSI System Test (Model 60 Only) . ................... 2–30

2.11.4 DSW21 Synchronous Communication System Test (Model 60

Only) ........................................... 2–32

2.12 Utilities . ........................................... 2–33

2.12.1 Utility Groups . ................................... 2–33

2.12.2 Utility Test Format ................................ 2–34

2.12.3 TEST/UTILITY Command ........................... 2–34

2.12.4 Utilities List Command Procedures . ................... 2–35

2.12.5 Graphics Utilities .................................. 2–36

2.12.6 Network Interconnect (NI) Utilities . ................... 2–36

2.12.6.1 NI Listener ................................... 2–37

2.12.6.2 Entity-Based Module (EBM) . . . ................... 2–37

2.12.7 SCSI Utilities . . ................................... 2–38

2.12.8 Invoking SCSI Utilities . . ........................... 2–39

2.12.9 SCSI Utility Menu ................................. 2–40

2.12.10 SCSI Utility Guidelines . . ........................... 2–42

2.12.11 TURBOchannel Adapter Utilities (Model 60 Only) ........ 2–42

2.12.11.1 MIPS/REX Emulator . ........................... 2–43

3 Using the Console

3.1 System Console . . . ................................... 3–2

3.1.1 Additional Console Commands........................ 3–2

3.1.2 SET and SHOW Commands.......................... 3–3

3.1.2.1 SET and SHOW Command Syntax ................. 3–4

3.1.2.2 BFLG ........................................ 3–4

3.1.2.3 BOOT ........................................ 3–4

3.1.2.4 CONFIG. . . ................................... 3–5

3.1.2.5 DEVICE . . . ................................... 3–5

3.1.2.6 DIAGENV . ................................... 3–5

3.1.2.7 ERROR . . . ................................... 3–6

3.1.2.8 ESTAT....................................... 3–7

3.1.2.9 ETHER . . . ................................... 3–7

3.1.2.10 FBOOT . . . ................................... 3–7

3.1.2.11 HALT........................................ 3–8

3.1.2.12 KBD......................................... 3–8

3.1.2.13 MEM ........................................ 3–9

3.1.2.14 MOP......................................... 3–9

3.1.2.15 PSE and PSWD ................................ 3–10

3.1.2.16 SCSI......................................... 3–11

3.1.2.17 TRIGGER. . ................................... 3–11

3.1.3 Memory Commands ................................ 3–12

3.1.3.1 DEPOSIT Command . ........................... 3–12

3.1.3.2 EXAMINE Command . ........................... 3–14

3.1.3.3 FIND Command ................................ 3–15

3.1.4 Processor Control Commands......................... 3–16

3.1.4.1 BOOT Command ............................... 3–16

3.1.4.2 CONTINUE Command .......................... 3–17

3.1.4.3 INITIALIZE and UNJAM Commands ............... 3–17

3.1.4.4 START Command . . . ........................... 3–17

3.2 Alternate Consoles . ................................... 3–18

3.2.1 Printer Port Console ............................... 3–18

3.2.2 Network Console .................................. 3–18

4 FRU Removal and Replacement Hints

4.1 Precautions ......................................... 4–2

4.2 Preliminary Steps . ................................... 4–2

4.3 System Preparation ................................... 4–3

4.4 Model 60 FRU Removal/Replacement Hints................. 4–5

4.4.1 Model 60 FRU Locations . ........................... 4–5

4.4.2 Hard Disk Drive................................... 4–6

4.4.3 RX26 Diskette Drive ............................... 4–7

4.4.4 TZK10 QIC Tape Drive and RRD42 CD-ROM Drive ....... 4–7

4.4.5 Power Supply . . ................................... 4–8

4.4.6 Lights and Switches Module ......................... 4–9

4.4.7 MS44 Memory Module . . . ........................... 4–9

4.4.8 LCG Graphics Module . . . ........................... 4–10

4.4.9 ScanProc Graphics Module........................... 4–11

4.4.10 System Module (CPU) . . . ........................... 4–13

4.4.11 Synchronous Communication Module .................. 4–13

4.4.12 TURBOchannel Adapter and Option Modules . . .......... 4–14

4.5 VLC FRU Removal/Replacement Hints . ................... 4–14

4.5.1 VLC FRU Locations ................................ 4–15

4.5.2 Hard Disk Drive................................... 4–16

4.5.3 Power Supply . . ................................... 4–16

4.5.4 Graphics/Audio Frame Buffer Module .................. 4–17

4.5.5 System Module (CPU) . . . ........................... 4–17

4.5.6 MS40 Memory Module . . . ........................... 4–18

A Interpreting Error Codes

A.1 Error Messages Overview . . . ........................... A–2

A.1.1 Extended Error Message . ........................... A–2

A.1.2 FRU Codes ....................................... A–3

A.2 Error Codes: Self-Tests, Systems Tests, and Utilities ......... A–5

A.2.1 TOY/NVR Self-Test Error Codes . . . ................... A–5

A.2.2 DZ Self-Test Error Codes . ........................... A–6

A.2.2.1 DZ System Test Error Codes (Model 60 Only) ......... A–9

A.2.3 Memory Self-Test Error Codes ........................ A–9

A.2.4 Interval Timer Self-Test Error Codes ................... A–12

A.2.5 System Device Self-Test Error Codes ................... A–13

A.2.6 SCSI Self-Test Error Codes .......................... A–13

A.2.7 SCSI Utilities Messages . . ........................... A–26

A.2.8 SCSI System Test Error Codes (Model 60 Only) .......... A–27

A.2.9 SCSI System Test Summary Screen (Model 60 Only)....... A–29

A.2.10 DSW21 Synchronous Communication Device Self-Test Error

Codes (Model 60 Only) . . . ........................... A–29

A.2.11 DSW21 Synchronous Communication Device Self-Test

Sequence Numbers (Model 60 Only) ................... A–36

A.2.12 DSW21 Synchronous Communication Utilities Error Codes

(Model 60 Only) ................................... A–42

A.2.13 DSW21 Synchronous Communication Device System Test

Error Codes (Model 60 Only) ......................... A–42

A.2.14 TURBOchannel Adapter Self-Test Error Codes . .......... A–43

A.2.15 TURBOchannel Adapter System Test Error Codes (Model 60

Only) ........................................... A–44

A.2.16 TURBOchannel Adapter MIPS/REX Emulator Utility

Commands (Model 60 Only) .......................... A–44

A.2.17 MIPS/REX Emulator Errors.......................... A–50

A.2.18 Floating-Point Unit (FPU) Self-Test Error Codes .......... A–51

A.2.19 Cache Self-Test Error Codes.......................... A–53

A.2.20 Graphics Self-Test Error Codes ....................... A–54

A.2.21 SPXg and SPXgt Graphics Self-Test Error Codes (Model 60

Only) ........................................... A–63

A.2.22 SPXg and SPXgt Graphics Self-Test Extended Summary

Screen (Model 60 Only) . . ........................... A–64

A.2.23 Graphics Utilities .................................. A–67

A.2.24 Graphics System Test Overview - LCG (Model 60 Only) . . . . A–68

A.2.25 Graphics System Test Overview - SPXg and SPXgt Modules

(Model 60 Only) ................................... A–68

A.2.26 LCG System Test Error Codes (Model 60 Only) . .......... A–68

A.2.27 Graphics System Test Summary Screen ................. A–70

A.2.28 SPXg and SPXgt Graphics System Test Summary Screen . . . A–70

A.2.29 SPXg and SPXgt Graphics System Test Error Codes (Model

60 Only) ........................................ A–71

A.2.30 Network Interconnect (NI) Self-Test Error Codes.......... A–71

A.2.31 Network Interconnect (NI) System Test Error Codes (Model

60 Only) ......................................... A–80

B Reading the Diagnostic LED Codes

B.1 Diagnostic LED Overview . . . ........................... B–2

B.2 LED Error Codes . . ................................... B–2

B.3 Power-Up and Initialization LED Codes ................... B–3

B.4 TOY and NVR LED Codes . . . ........................... B–4

B.5 LCG and Graphics/Audio Frame Buffer LED Codes .......... B–4

B.6 SPXg and SPXgt Graphics LED Codes. . ................... B–5

B.7 DZ LED Codes ....................................... B–6

B.8 Cache LED Codes . ................................... B–7

B.9 Memory LED Codes ................................... B–8

B.10 System Device LED Codes . . . ........................... B–8

B.11 Network Interconnect (NI) Device LED Codes ............... B–9

B.12 SCSI Device LED Codes................................ B–10

B.13 DSW21 Synchronous Communication Device LED Codes (Model

60 Only) . ........................................... B–11

B.13.1 TURBOchannel Adapter LED Codes (Model 60 Only) ...... B–12

C Troubleshooting

C.1 Troubleshooting Overview . . . ........................... C–2

C.2 Troubleshooting: Symptoms, Causes, and Corrective Action . . . . C–2

vii

D FRU Part Numbers

D.1 Precautions ......................................... D–2

D.2 Model 60 System Box FRUs . . ........................... D–2

D.3 Model 60 Monitor FRUs ................................ D–4

D.4 Model 60 System Box Miscellaneous Hardware FRUs ......... D–4

D.5 Model 60 System Box Cables and Terminators .............. D–5

D.6 VLC System Box FRUs ................................ D–7

D.7 VLC Monitor FRUs ................................... D–7

D.8 VLC System Box Miscellaneous Hardware ................. D–8

D.9 VLC System Box Cables................................ D–8

D.10 SZ16 Expansion Box FRUs . . ........................... D–9

D.11 SZ16 Expansion Box Miscellaneous Hardware ............... D–10

D.12 SZ16 Expansion Box Cables and Terminators ............... D–11

D.13 SZ03 Expansion Box FRUs . . ........................... D–11

D.14 SZ03 Expansion Box Miscellaneous Hardware............... D–12

D.15 SZ03 Expansion Box Cables and Terminators ............... D–12

Index

Examples

2–1 SHOW DEVICE Command .......................... 2–4

2–2 Conﬁguration Table ................................ 2–6

2–3 SHOW ERROR ................................... 2–7

2–4 SET DIAGENV ................................... 2–9

2–5 DZ System Test Error . . . ........................... 2–29

2–6 DZ System Test Summary Screen . . ................... 2–29

2–7 System Test Summary Display ....................... 2–32

2–8 Communication System Test Summary ................. 2–33

2–9 LCG Utilities Menu ................................ 2–36

2–10 SCSI Utilities Sample Session ........................ 2–40

3–1 Network Console Session . ........................... 3–20

viii

Figures

2–1 Successful System Test . . ........................... 2–25

2–2 Unsuccessful System Test ........................... 2–26

2–3 Summary Screen .................................. 2–28

2–4 Utilities List. . . ................................... 2–35

2–5 SCSI Utilities Display . . . ........................... 2–41

4–1 System FRU Locations (Front View) ................... 4–5

4–2 System FRU Locations (Rear View) . ................... 4–15

A–1 SPXg and SPXgt Power-Up Error Code Format . .......... A–63

A–2 SPXg and SPXgt Self-Test Extended Summary Screen . . . . . A–64

Tables

1–1 VAXstation 4000 Model 60/VLC System Box Conﬁguration

Comparison . . . ................................... 1–2

1–2 Monitor Cross Reference for VAXstation 4000 Model 60 and

VLC............................................ 1–3

1–3 VAXstation 4000 Model 60 and VLC Graphic Module/Monitor

Cross Reference ................................... 1–4

1–4 LCG/Frame Buffer SHOW CONFIG Quick Reference ...... 1–7

1–5 VAXstation 4000 Model 60/VLC Voltage Comparison ....... 1–7

1–6 VAXstation 4000 Model 60/VLC Power Supply

Speciﬁcations . . ................................... 1–8

1–7 Internal System Devices and Their Cables Comparison . . . . . 1–10

1–8 Control and Indicator Location ....................... 1–10

1–9 VAXstation 4000 Model 60/VLC Control Panel . .......... 1–11

1–10 VAXstation 4000 Model 60/VLC I/O Connectors. .......... 1–12

2–1 Diagnostic Functions ............................... 2–2

2–2 SET DIAGENV Commands .......................... 2–9

2–3 Device Test IDs and Mnemonics . . . ................... 2–10

2–4 TOY/NVR Self-Test (1) . . . ........................... 2–12

2–5 Graphics Self-Test (2) ............................... 2–14

2–6 DZ Self-Test (3) ................................... 2–15

2–7 Cache Self-Test (4) ................................. 2–16

2–8 Memory Self-Test (5) ............................... 2–16

2–9 Floating-Point Unit Self-Test (6) . . . ................... 2–17

2–10 Interval Timer Self-Test (7) .......................... 2–18

2–11 System Self-Test (8) ................................ 2–18

2–12 Network Interconnect Self-Test (9) . . ................... 2–19

2–13 SCSI Self-Test (10) ................................. 2–20

2–14 Synchronous Communication Self-Test (12) .............. 2–21

2–15 TURBOchannel Adapter Self-Test (13) .................. 2–22

2–16 Running the System Test Using the Test Command ....... 2–24

2–17 SCSI System Test.................................. 2–31

3–1 SET/SHOW Parameters . . ........................... 3–3

3–2 Diagnostic Environments . ........................... 3–5

3–3 SET DIAGENV Command ........................... 3–6

3–4 DEPOSIT Command Qualiﬁers ....................... 3–13

3–5 EXAMINE Command Qualiﬁers . . . ................... 3–14

3–6 BOOT Command Syntax . ........................... 3–16

A–1 FRU Codes ....................................... A–4

A–2 TOY/NVR Test Error Codes .......................... A–5

A–3 DZ Self-Test Error Codes . ........................... A–6

A–4 DZ Suberror Codes ................................. A–8

A–5 Memory Test Error Codes ........................... A–10

A–6 MEM Memory Module FRU Values . ................... A–12

A–7 Interval Timer Test Error Codes . . . ................... A–12

A–8 System Device Self-Test Error Codes ................... A–13

A–9 SCSI Self-Test Error Codes .......................... A–14

A–10 SCSI Information Values . ........................... A–22

A–11 SCSI Mode Values ................................. A–25

A–12 Text Messages for SCSI Utilities . . . ................... A–26

A–13 Additional SCSI Information Values for Utilities .......... A–27

A–14 SCSI System Test Error Codes........................ A–28

A–15 DSW21 Synchronous Communication Device Self-Test Error

Codes (Model 60 Only) . . . ........................... A–30

A–16 DSW21 Synchronous Communication Self-Test Sequence

Numbers (Model 60 Only) ........................... A–36

A–17 DSW21 Synchronous Communication Utilities Error

Codes ........................................... A–42

A–18 TURBOchannel Adapter Self-Test Error Codes . .......... A–43

A–19 FPU Test Error Codes . . . ........................... A–51

A–20 FP Exception Vectors ............................... A–53

A–21 Cache Test Error Codes . . ........................... A–53

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Equipment Desktop Handbücher

Digital Equipment

Digital Equipment VAXstation 2000 Montage- und Wartungsanleitung

Digital Equipment

Digital Equipment MicroVAX 3100 Model 85 Service-Handbuch

Digital Equipment

Digital Equipment PDP-8/A Service-Handbuch

Digital Equipment

Digital Equipment VAXmate Bedienungsanleitung

Digital Equipment

Digital Equipment MicroPDP-11 Bedienungsanleitung

Digital Equipment

Digital Equipment VAX 4000 500A Bedienungsanleitung

Digital Equipment

Digital Equipment MicroVAX 3100 40 Kurzanleitung

Digital Equipment

Digital Equipment microvax II 630qy Bedienungsanleitung

Digital Equipment

Digital Equipment DECstation 2100 Handbuch

Digital Equipment

Digital Equipment 900 AXP Betriebsanleitung

Digital Equipment

Digital Equipment DEC 2000 500 AXP Bedienungsanleitung

Digital Equipment

Digital Equipment PDP-12 Bedienungsanleitung

Digital Equipment

Digital Equipment AlphaStation 500 Series Bedienungsanleitung

Digital Equipment

Digital Equipment VT180 Series Bedienungsanleitung

Digital Equipment

Digital Equipment Venturis FX Bedienungsanleitung

Digital Equipment

Digital Equipment DIGITAL Ultimate Workstation 533 Bedienungsanleitung

Digital Equipment

Digital Equipment VT420 Bedienungsanleitung

Digital Equipment

Digital Equipment VENTURIS 575 Bedienungsanleitung

Digital Equipment

Digital Equipment VT100 Bedienungsanleitung

Digital Equipment

Digital Equipment DECpc LPv 425sx Bedienungsanleitung

Digital Equipment

Digital Equipment VAXstation 3100 Series Installations- und Betriebshandbuch

Digital Equipment

Digital Equipment microvax II 630qy Bedienungsanleitung

Digital Equipment

Digital Equipment DEC 3000 500X AXP Bedienungsanleitung

Digital Equipment

Digital Equipment PDP-11 Series Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

HP m9060n - Pavilion - Elite Technisches Datenblatt

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

HP Presario SV7000 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G5 Handbuch

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

HP Z1 Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung