Digital Watchdog MEGApix IVA DWC-MB48WiAT Bedienungsanleitung

User’s Manual Ver. 07/21

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

MEGApix® IVATM 4K Bullet IP Camera

DWC-MB48WiAT - IVA license pre-loaded

DWC-MPB48WiAT - IVA+ license pre-loaded

WARNING

To prevent damage which may result in fire or electric shock

hazard, do not expose this appliance to rain or moisture.

WARNING

1. Be sure to use only the standard adapter that is

specified in the specification sheet. Using any other

adapter could cause fire, electrical shock, or damage to

the product.

2. Incorrectly connecting the power supply or replacing

the battery may cause an explosion, fire, electric shock,

or damage to the product.

3. Do not connect multiple cameras to a single adapter.

Exceeding the capacity may cause excessive heat

generation or ﬁre.

4. Securely plug the power cord into the power

receptacle. An insecure connection may cause ﬁre.

5. When installing the camera, fasten it securely and

ﬁrmly. A falling camera may cause personal injury.

6. Do not place conductive objects (e.g. screwdrivers,

coins, metal items, etc.) or containers ﬁlled with water

on top of the camera. Doing so may cause personal

injury due to ﬁre, electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty

locations. Doing so may cause ﬁre or electric shock.

8. If any unusual smells or smoke come from the unit, stop

using the product. Immediately disconnect the power

source and contact the service center. Continued use in

such a condition may cause ﬁre or electric shock.

9. If this product fails to operate normally, contact the

nearest service center. Never disassemble or modify

this product in any way.

10. When cleaning, do not spray water directly onto parts

of the product. Doing so may cause ﬁre or electric

shock.

Precaution

Operating

•Before using, make sure the power supply and all other

parts are properly connected.

•While operating, if any abnormal condition or

malfunction is observed, stop using the camera

immediately and contact your dealer.

Handling

•Do not disassemble or tamper with parts inside the

camera.

•Do not drop the camera or subject it to shock or

vibration as this can damage the camera.

•Clean the clear dome cover with extra care. Scratches

and dust can ruin the quality of the camera image.

Installation and Storage

•Do not install the camera in areas of extreme

temperature, exceeding the allowed range.

•Avoid installing in humid or dusty environments.

•Avoid installing in places where radiation is present.

•Avoid installing in places where there are strong

magnetic fields and electric signals.

•Avoid installing in places where the camera would be

subject to strong vibrations.

•Never expose the camera to rain or water.

Warning

This symbol indicates that dangerous

voltage consisting of a risk of electric

shock is present within this unit.

Precaution

This exclamation point symbol is intended

to alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE

PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safety Instructions

1. Read these Instructions. - All these safety and operating instructions should be read before the product is installed

or operated.

2. Keep these Instructions. - The safety, operating and use instructions should be retained for future reference.

3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use instructions should be followed.

5. Do not use this device near water. - For example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement; near a swimming pool; etc.

6. Clean only with a dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

7. Do not block any ventilation openings. Install following the manufacturer’s instructions. - Slots and openings

in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it from over-

heating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been adhered to.

8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disposal of Old Appliances

1. When this crossed-out wheel bin symbol is attached to a product it means the

product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately from the

municipal waste stream per laws designated by the government or the local

authorities.

3. The correct disposal of your old appliance will help prevent potential negative

consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact

your city office, waste disposal service or the shop where you purchased the product.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense.

Introduction

Product and Accessories......................................................................................................................................................................4

Parts Names......................................................................................................................................................................5

Installation

Moisture Absorber Installation................................................................................................................................................................................6

Factory Reset....................................................................................................................................................................................................6

Installation..........................................................................................................................................................................................7

Cabling............................................................................................................................................................................................8

Managing the SD Card................................................................................................................................................................................10

Network Setup

DW IP Finder.................................................................................................................................................................................................................11

Web Viewer

Login to the Camera..................................................................................................................................................................................................12

GUI Overview.......................................................................................................................................................................................................13

Camera Settings

Settings > Video and Audio Setup......................................................................................................................................................................14

Settings > Camera Setup > Image Adjustment.............................................................................................................................................21

Settings > Camera Setup > Exposure Settings............................................................................................................................................22

Settings > Camera Setup > Day and Night Settings...................................................................................................................................23

Settings > Camera Setup > Backlight Settings............................................................................................................................................24

Settings > Camera Setup > White Balance Settings..................................................................................................................................25

Settings > Camera Setup > Image Enhancement Settings....................................................................................................................26

Settings > Camera Setup > Video Enhancement Settings....................................................................................................................27

Settings > Network Setup.......................................................................................................................................................................................28

Settings > Trigger Action Setup..........................................................................................................................................................................38

Settings > Event Setup.............................................................................................................................................................................................42

Settings > Record Setup..........................................................................................................................................................................................47

Settings > Security Setup.......................................................................................................................................................................................53

Settings > System Setup > System Information..........................................................................................................................................60

Settings > System Setup > Firmware...............................................................................................................................................................62

Settings > System Setup > Date and Time.....................................................................................................................................................63

Settings > System Setup > DST............................................................................................................................................................................64

Settings > System Setup > Users.........................................................................................................................................................................65

Settings > System Setup > System Log..........................................................................................................................................................66

Settings > System Setup > Factory Reset......................................................................................................................................................67

Settings > System Setup > Restart....................................................................................................................................................................68

Settings > System Setup > System Open Source License......................................................................................................................69

Settings > System Setup > Plug-in.....................................................................................................................................................................70

Appendix......................................................................................................................................................................71

FAQs......................................................................................................................................................................78

Dimensions......................................................................................................................................................................79

Specifications......................................................................................................................................................................80

Warranty.....................................................................................................................................................................81

Limits and Exclusions................................................................................................................................................................82

Table of Contents

Introduction -

Product & Accessories

Star Wrench T-10 Star Wrench T-20 PoE injector and

power cable (optional)

Test Monitor CableMounting Template Waterproof Cap

and Gasket

Screws and

Plastic Anchor - 4pcs

Desi-Pak 2ea

(Moisture Absorber)

and Installation

Guide

Camera

Cables

Please check that the camera and all accessories are included in the package.

Quick Installation and

Download Guides

Introduction -

Part Name

RJ-45 connector

Waterproof cap

DC power jack

Sunshield Sunshield adjusting screw

Lens

Side cover

Alarm in/out

Audio in/out

Reset button

SD card slot

Bracket

Test video output

Installation -

Installation

Before installing your camera, you have to read the following cautions.

1The mounting surface must withstand five times the camera weight.

2Do not let the cables get caught in improper places or the electric line cover can be damaged. This may cause

a short or fire.

3For the installation process, remove the sun-shield cover as needed.

4Install the moisture packet in the camera’s external control panel.

a. Remove the Desi-Pack moisture absorber from the packaging.

b. Open the side cover to reach the external camera control panel.

c. Place the moisture absorber under the camera’s SD card slot.

NOTE: The camera will generate enough heat to dry moisture

during operation. In most cases it will not need the

moisture absorber for more than the ﬁrst day. In cases

where the camera can experience a moisture issue,

users must keep the moisture absorber in the camera.

The moisture absorber has an approximately 6-month

life cycle, varying depending on the environment.

WARNING: It is highly recommended that you install the moisture

absorber when mounting the camera. The moisture

absorber prevents moisture from being captured

inside the camera's housing, which may cause image

performance issues and damage the camera.

Reset to the Factory Default

Press the reset button for 5 seconds to return the

setup to the factory default.

Warning:

If you press the ‘Reset’ button, you will lose all

setting data. If needed, please, make a note for

further installation.

SD card slot

Reset button

Test video output

DESI PAK

DESI P

SI PAK

DESI PA

DESI PAK

DESI P

SI PAK

Installation -

Installation

1Using the mounting template sheet or the camera itself, mark and drill the necessary holes in the wall or ceiling.

2Once all cables are connected, secure the camera to the mounting surface using the included screws.

3To use the camera’s waterproof wiring:

a. Install the LAN cable into (a) .

b. (b) will be assembled to (a) with a 1/4 turn.

c. Thread (c) tightly to (b).

NOTE: To ensure moisture seal, make sure the o-ring is in place

between and . In extreme environments use of an

outdoor rated sealer is recommended.

NOTE: When using the waterproof cap, crimp the RJ45

connector after passing the cable through the

waterproof cap.

4Loosen the pan and tilt screws at the base of the camera’s

bracket to adjust the camera’s view and position.

Installation -

Cabling

1. Using a PoE-Enabled Switch

The Camera is PoE-compliant, allowing transmission

of power and data via a single Ethernet cable.

PoE eliminates the need for the different cables used

to power, record, or control the camera. Follow the

illustration below to connect the camera to a PoE-

enabled switch using an Ethernet cable.

2. Using a Non-PoE Switch

If a PoE-enabled switch is not used, use a power

adaptor for power transmission and non-PoE switch

for data transmission.

Follow the illustrations below to connect the camera

without a PoE-enabled Switch.

Two Options

Use a PoE-enabled switch to connect data and power through a single cable and begin viewing and recording

images instantly.

A non-PoE switch will require an adaptor for power transmission.

Ethernet Cable Ethernet Cable

Power

Installation -

Cabling

1Power

2Network

4Audio output

3Audio input

5Alarm output

6Alarm input

5Alarm output

DI (+) WHITE

DI (-) YELLOW

DO (-) SKY BLUE

DO (+) GRAY +DOT

N.C

N.O In 1

COM

In1

COM

In1

COM

In1

COM

Power requirements Power consumption

DC12V, IEEE 802.3at PoE+ class

4 (Adapter not included)

DC12V: 10.2W

PoE: 16W

1Power connection

Please, check the voltage and current capacity of

rated power carefully.

2Network connection

Connect the crossover cable into the RJ-45.

3Audio output

Connect the ‘audio out’ port of the camera to the

‘line in’ port of the speaker.

If the speaker without the amplifier is connected

to the audio out port, it doesn’t work properly.

Therefore, the speaker with the amplifier or the

separate amplifier is needed.

Audio out is available via the RTSP backchannel.

4Audio input

Connect the ‘audio in’ port of the camera to the

microphone directly or 'line out’ port of the

amplifier connected with a microphone.

If the microphone is connected directly, the

microphone with the embedded amplifier such

as condenser mic. needs to be used.

5Alarm/relay output (DO)

Connects to the alarm lights, siren or lamps and

the sensor types are normally open and

normally close.

6Sensor/alarm input (DI)

The sensor/alarm input device's cable should

connect to + and - of the camera's cable.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Watchdog IP-Kamera Handbücher

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA583WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV75Wi28TW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MTT4WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog Megapix DWC-MBT4Wi28 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MV84WiAC6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MPTZ336XW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MPTZ20XFM Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MTT4Wi36 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MF21M4TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-PB6M4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-B6883WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MD421TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MVT4Wi6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA553WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-PB6M4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix DWC-MB421TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MF4Wi4C6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV72Wi4A Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix FLEX DWC-PVX16W Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-V6863WTIRW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix IVA DWC-MVD8WiATW Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

Digital Watchdog

Digital Watchdog Megapix DWC-MTT4Wi28 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix IVA+ DWC-MPV45WiATW Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung

Digitus

Digitus DN-16085-1 Bedienungsanleitung