Digital Watchdog MEGApix IVA DWC-MVD8WiATW Bedienungsanleitung

User’s Manual Ver. 07/21

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

MEGApix® IVATM 4K Galaxy Ball IP Camera

DWC-MVD8WiATW - IVA license pre-loaded,

vari-focal lens

DWC-MVD8Wi28TW - IVA license pre-loaded,

fixed lens

DWC-MPVD8WiATW - IVA+ license pre-loaded,

vari-focal lens

DWC-MPVD8Wi28TW - IVA+ license pre-loaded,

fixed lens

WARNING

To prevent damage which may result in fire or electric shock

hazard, do not expose this appliance to rain or moisture.

WARNING

1. Be sure to use only the standard adapter that is

specified in the specification sheet. Using any other

adapter could cause fire, electrical shock, or damage to

the product.

2. Incorrectly connecting the power supply or replacing

the battery may cause an explosion, fire, electric shock,

or damage to the product.

3. Do not connect multiple cameras to a single adapter.

Exceeding the capacity may cause excessive heat

generation or ﬁre.

4. Securely plug the power cord into the power

receptacle. An insecure connection may cause ﬁre.

5. When installing the camera, fasten it securely and

ﬁrmly. A falling camera may cause personal injury.

6. Do not place conductive objects (e.g. screwdrivers,

coins, metal items, etc.) or containers ﬁlled with water

on top of the camera. Doing so may cause personal

injury due to ﬁre, electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or sooty

locations. Doing so may cause ﬁre or electric shock.

8. If any unusual smells or smoke come from the unit, stop

using the product. Immediately disconnect the power

source and contact the service center. Continued use in

such a condition may cause ﬁre or electric shock.

9. If this product fails to operate normally, contact the

nearest service center. Never disassemble or modify

this product in any way.

10. When cleaning, do not spray water directly onto parts

of the product. Doing so may cause ﬁre or electric

shock.

Precaution

Operating

•Before using, make sure the power supply and all other

parts are properly connected.

•While operating, if any abnormal condition or

malfunction is observed, stop using the camera

immediately and contact your dealer.

Handling

•Do not disassemble or tamper with parts inside the

camera.

•Do not drop the camera or subject it to shock or

vibration as this can damage the camera.

•Clean the clear dome cover with extra care. Scratches

and dust can ruin the quality of the camera image.

Installation and Storage

•Do not install the camera in areas of extreme

temperature, exceeding the allowed range.

•Avoid installing in humid or dusty environments.

•Avoid installing in places where radiation is present.

•Avoid installing in places where there are strong

magnetic fields and electric signals.

•Avoid installing in places where the camera would be

subject to strong vibrations.

•Never expose the camera to rain or water.

Warning

This symbol indicates that dangerous

voltage consisting of a risk of electric

shock is present within this unit.

Precaution

This exclamation point symbol is intended

to alert the user to the presence of

important operating and maintenance

(servicing) instructions in the literature

accompanying the appliance.

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION :

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE

PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safety Instructions

1. Read these Instructions. - All these safety and operating instructions should be read before the product is installed

or operated.

2. Keep these Instructions. - The safety, operating and use instructions should be retained for future reference.

3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use instructions should be followed.

5. Do not use this device near water. - For example: near a bathtub, washbowl, kitchen sink, laundry tub, in a wet

basement; near a swimming pool; etc.

6. Clean only with a dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

7. Do not block any ventilation openings. Install following the manufacturer’s instructions. - Slots and openings

in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it from over-

heating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided and the manufacturer’s instructions have been adhered to.

8. Do not install near any heat sources such as radiators, heat registers, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Disposal of Old Appliances

1. When this crossed-out wheel bin symbol is attached to a product it means the

product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately from the

municipal waste stream per laws designated by the government or the local

authorities.

3. The correct disposal of your old appliance will help prevent potential negative

consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please contact

your city office, waste disposal service or the shop where you purchased the product.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the interference at his own expense.

Introduction

Product and Accessories......................................................................................................................................................................4

Parts Names......................................................................................................................................................................5

Installation

Moisture Absorber Installation................................................................................................................................................................................6

Factory Reset....................................................................................................................................................................................................6

Installation..........................................................................................................................................................................................7

Cabling............................................................................................................................................................................................8

Managing the SD Card................................................................................................................................................................................10

Network Setup

DW IP Finder.................................................................................................................................................................................................................11

Web Viewer

Login to the Camera..................................................................................................................................................................................................12

GUI Overview.......................................................................................................................................................................................................13

Camera Settings

Settings > Video and Audio Setup......................................................................................................................................................................14

Settings > Camera Setup > Image Adjustment.............................................................................................................................................21

Settings > Camera Setup > Exposure Settings............................................................................................................................................22

Settings > Camera Setup > Day and Night Settings...................................................................................................................................23

Settings > Camera Setup > Backlight Settings............................................................................................................................................24

Settings > Camera Setup > White Balance Settings..................................................................................................................................25

Settings > Camera Setup > Image Enhancement Settings....................................................................................................................26

Settings > Camera Setup > Video Enhancement Settings....................................................................................................................27

Settings > Network Setup.......................................................................................................................................................................................28

Settings > Trigger Action Setup..........................................................................................................................................................................38

Settings > Event Setup.............................................................................................................................................................................................42

Settings > Record Setup..........................................................................................................................................................................................47

Settings > Security Setup.......................................................................................................................................................................................53

Settings > System Setup > System Information..........................................................................................................................................60

Settings > System Setup > Firmware...............................................................................................................................................................62

Settings > System Setup > Date and Time.....................................................................................................................................................63

Settings > System Setup > DST............................................................................................................................................................................64

Settings > System Setup > Users.........................................................................................................................................................................65

Settings > System Setup > System Log..........................................................................................................................................................66

Settings > System Setup > Factory Reset......................................................................................................................................................67

Settings > System Setup > Restart....................................................................................................................................................................68

Settings > System Setup > System Open Source License......................................................................................................................69

Settings > System Setup > Plug-in.....................................................................................................................................................................70

Appendix......................................................................................................................................................................71

FAQs......................................................................................................................................................................78

Dimensions......................................................................................................................................................................79

Specifications......................................................................................................................................................................80

Warranty.....................................................................................................................................................................81

Limits and Exclusions................................................................................................................................................................82

Table of Contents

Introduction -

Product & Accessories

Camera

Cables

Waterproof cap &

Gasket

Hexagonal Wrench HEX1.5

(For fixing camera

rotation)

Hexagonal Wrench HEX2.5

(For fixing camera tilt /

tightening OSD Cover)

Screw & Plastic Anchor -

2pcs

Quick Manual Template Sheet Test Video Cable

Mount Bolt & Nut

Screw (For installing

the bracket)

Introduction -

Part Name

Lens

IR LED

Camera Tilt/Pan Screw

Photodiode

Camera Rotation Screw

Alarm In/Out

Audio In/Out

RJ-45 Connector

DC Power Jack

Waterproof cap

2nd Video

Reset Button

SD Card Slot

1Please take care of following cautions when

disassembling to use reset button :

Cable damage during the assembling

and disassembling.

Do not touch other parts.

Do not open the case for long time to prevent

moisture problem.

Reset to the Factory Default

Press the reset button for 5 seconds to return the

setup to the factory default.

Warning :

If you press the ‘Reset’ button, you will lose all

setting data. If needed, please, make a note for

further installation.

Installation -

Disassemble the camera

Before installing your camera, you have to read the following cautions.

1. You have to check whether the location can bear five times of the weight of your camera.

2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged.

Otherwise it may cause a breakdown or fire.

3. When installing your camera, don’t allow any person to approach the installation site. If you have any valuable

things under the place, move them away.

Reset Button

Installation -

Installation

1Using the template sheet, make the cabling hole

on the wall/ceiling. After making the cabling hole,

pass the cables through the hole.

2Connect the network cable and power cable

respectively. See the section 'Installation - Cabling'

for details.

Put the Lan cable into (a), then (b) will be

assembled to (a) tightly. As a final step, (c) need

to be assembled to (b) without making any space.

3Fix the camera on the wall/ceiling by screw

provided.

Loosen the Pan/Tilt/Rotate screw a little before

fixing the camera.

4After adjusting the view angle, tighten the Pan/

Tilt/Rotate screw.

5Remove the protective film from the camera to

complete the installation.

Template Sheet

1Disassemble the camera. See the section

Installation - Disassemble the camera’ for details.

2Using the template sheet, make the cabling holes

on the ceiling panel.

3Insert the 2 mount bolts into bottom case

of camera.

Installation -

Installation Using Mount Bolt & Nut

Template Sheet

1Insert the mount bolts into template holes after

connecting the cable.

2Fix the bottom case by tightening mount nuts to

mount bolts on the ceiling panel.

Installation -

Installation Using Mount Bolt & Nut

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digital Watchdog IP-Kamera Handbücher

Digital Watchdog

Digital Watchdog DWC-MF4Wi4C6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MV84WiAC6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MTT4WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MPTZ336XW Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MTT4Wi36 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV75Wi28TW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix DWC-MB421TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix FLEX DWC-PVX16W Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix IVA DWC-MB48WiAT Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix IVA+ DWC-MPV45WiATW Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA583WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-B6883WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Megapix DWC-MTT4Wi28 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MVT4Wi6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog D2372TIR Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog Megapix DWC-MBT4Wi28 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV72Wi4A Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MD421TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA553WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-V6863WTIRW Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-PB6M4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MF21M4TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MB721M8TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWCA-C128-64 Bedienungsanleitung

Beliebte IP-Kamera Handbücher anderer Marken

FLIR

FLIR Exx series Bedienungsanleitung

Avigilon

Avigilon H4A-BO1-IR Bedienungsanleitung

ShareTech

ShareTech AV1 Bedienungsanleitung

Ezviz

Ezviz C6C Bedienungsanleitung

Melchioni

Melchioni UCAM 2015 Bedienungsanleitung

Geutebruck

Geutebruck G-Cam/ESD-4630 Bedienungsanleitung

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Bedienungsanleitung

Mitel

Mitel 6800i Series Service-Handbuch

Vitek

Vitek VTC-IR403-212NP Bedienungsanleitung

THOMSON

THOMSON DSC - 323W Bedienungsanleitung

AVer

AVer FB2027 Bedienungsanleitung

ENFORCER

ENFORCER EV-T5105-N2SQ Bedienungsanleitung

Wansview

Wansview NC543 Bedienungsanleitung

Eneo

Eneo MCB-64A0003M0A Bedienungsanleitung

deView electronics

deView electronics CBDNI36F Bedienungsanleitung

Swann

Swann SwannEye Bedienungsanleitung

LevelOne

LevelOne IP CamSecure Bedienungsanleitung

Digitus

Digitus DN-16085-1 Bedienungsanleitung