Digital Watchdog DWC-LPR650U Bedienungsanleitung

Quick Start Guide

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday through Friday

digital-watchdog.com

Attention: This document is intended to serve as a quick reference for the initial

setup. It is recommended that the user read the entire instruction manual for com-

plete and proper installation and usage.

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources.

2. Search your product by entering the part number in the

‘Search by Product’ search bar. Results for applicable

part numbers will populate automatically based on the

part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

DWC-LPR650U

WHAT’S IN THE BOX

Manual 1

Screws and

plastic

anchors – 4pcs

1 set

Mounting

template 1Star wrench 1

Test video cable 1DC plug cable 1

Moisture

absorber and

absorber guide

(recommended)

1 set

STEP 1 – PREPARING TO MOUNT THE CAMERA STEP 3 – MOUNTING AN LPR CAMERA

Quick Start Guide

STEP 2 – CABLING THE CAMERA

Pass the wires through the mount bracket and make all necessary

connections. Connect the BNC cable and power cables to the camera.

Power requirements Power consumption

DC12V/AC24V dual voltage DC12V (LED on): 6.12W

AC24V (LED on): 5.7W

DW® Universal HD over Coax® LPR cameras

THE CAPTURED IMAGE SHOULD BE FILLED WITH THE FULL WIDTH OF THE VEHICLES

THE CAMERA SHOULD BE MOUNTED AT AN ANGLE NO GREATER THAN 30 DEGREES

CAMERA ANGLE NO GREATER THAN 20 DEGREES FOR SIDE MOUNT INSTALLATIONS

>11.5ft

< 30

< 20

Please cut the card type absorber along

a dotted line, overlap and attach them

according to the direction of the arrow.

Please cut the card type absorber along

a dotted line, overlap and attach them

according to the direction of the arrow.

1. The mounting surface must withstand ﬁve times the camera weight.

2. Do not let the cables get caught in improper places or the electric line

cover can be damaged. This may cause a short or ﬁre.

3. Install the moisture packet in the base of the camera’s lens.

a. Remove the moisture absorber from the packaging.

b. Cut the card and folder along the dotted line.

c. Place the moisture absorber behind the camera’s lens module. See

drawing for more information.

4. Using the mounting template sheet or the camera itself, mark and drill

the necessary holes in the wall or ceiling.

WARNING: It is highly recommended that you install the moisture

absorber when mounting the camera. The moisture

absorber prevents moisture from being captured

inside the camera's housing, which may cause image

performance issues and damage the camera.

NOTE: The camera will generate enough heat to dry moisture

during operation. In most cases it will not need the

moisture absorber for more than the ﬁrst day. In cases

where the camera can experience a moisture issue,

users must keep the moisture absorber in the camera.

The moisture absorber has an approximately 6-month

life cycle, varying depending on the environment.

Torx Wrench DC Plug Cable Test Video Cable

ManualTemplate Sheet Screw & Moisture absorber &

Absorber Guide

Sunshield cover &

Rev Date: 04/21

Speciﬁcations and pricing are subject to change without notice.

Quick Start Guide

1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To switch between the signals:

a. Remove the camera’s dome to access the joystick and OSD control on the base of the camera.

b. Use the OSD Switch to switch the camera’s signal.

• To switch the camera to HD-TVI mode, press OSD joystick to the left for 5 seconds.

• To switch the camera to HD-Analog mode, press OSD joystick to the right for 5 seconds.

• To switch the camera to CVBS mode, press OSD joystick up for 5 seconds.

• To switch the camera to HD- CVI mode, press OSD joystick down for 5 seconds.

STEP 5 – INSTALLING THE CAMERASTEP 4 – CHANGING THE SIGNAL IN THE CAMERA

Zoom lever

Wide Tele

Focus lever

Far Near

Test video connector for

on-site conﬁguration

1. Once all cables have been connected, use the screws included with the camera to properly mount

and secure the camera to the mounting surface.

2. To adjust the camera’s tilt, loosen the screws at the base of the camera’s bracket.

The camera’s max angles are:

Pan: 0°~ 360°

Tilt: 0°~ 90°

3. To adjust the camera’s focus and zoom:

a. Remove the sun-shield and front case from the camera.

b. Unlock the zoom or focus screws by rotating them counterclockwise.

c. Use the wrench included to adjust the zoom and focus screws at the base

of the camera module to achieve a clear image.

d. Tighten the screws and close the front case

by rotating it clockwise.

HD-AHD-TVI

CVBS(960H)

HD-CVI

Enter R

Right

2ND

EX-CON

Down

Andere Handbücher für DWC-LPR650U

Andere Digital Watchdog Sicherheitskamera Handbücher

Digital Watchdog

Digital Watchdog Starlight V3363DH Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-B5661TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog x12 WDR PTZ Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix Ai ANPR Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-B7753TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MC352 Bedienungsanleitung

Digital Watchdog

Digital Watchdog V2262D Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MPB72Wi4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog Megapix DWC-MV72I28V Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MV84WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MD44WA Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MC753WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-D4283WD Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-D4583WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Infinity C233W Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS DWC-B6853WTIRW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGAPIX PANO DWC-PVF5M1TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix CaaS DWCA-VF25W28-64 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PVF5M1TIRC6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-D6351D Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix DWC-MVT4WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog Starlight DWC-B6563DIR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung