Digital Watchdog DWC-MB44iALPR Bedienungsanleitung

User’s Ma’sManunualal7FS

nBefore installing and using the camera, please read this manual carefully.stalling and using the camera, please read this manual carefully.

to keep it handyBe sure to keep it handy for future reference.for future reference.

0(*$SL[03/LFHQVH3ODWH

5HFRJQLWLRQ%XOOHW&DPHUD

':&0%L$/35

Index

INTRODUCTION

Important Safety Information

'FBUVSFT

Product & Accessories

Part Name





0



INSTALLTION

Installation

Cabling

Inserting / Removing an SD Memory Card

0

1

1

NETWORK SETUP

%8*1'JOEFS

Quick Start of Network Connection

DDNS Registration

Guide to Network Environment

Setup Case (A~D)

Port Forwarding

Starting IP Camera















Video & Audio Setup

Camera Setup

Network Setup

Trigger Action Setup

Events Setup

Record Setup

Security Setup

System Setup

















APPENDIX

Current TCP/IP Settings

Changing IP Address and Subnet mask

4QFDJGJDBUJPOT

FAQ





7



SPECIFICATION

DimensionT

8BSSBOUZ

-JNJUTBOE&YDMVTJPOT







WEB VIEWER SCREEN

2 Basic Screen

SETUP

Safety Information

This symbol indicates that dangerous voltage

consisting a risk of electric shock is present within

this unit.

Warning Precaution

This exclamation point symbol is intended to alert the

user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE

PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION:

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

To prevent damage which may result in ﬁre or electric shock

hazard, do not expose this appliance to rain or moisture.

WARNING

Be sure to use only the standard adapter that is speciﬁed in

the speciﬁcation sheet. Using any other adapter could cause

ﬁre, electrical shock, or damage to the product.

Incorrectly connecting the power supply or replacing battery

may cause explosion, ﬁre, electric shock, or damage to the

product.

Do not connect multiple cameras to a single adapter.

Exceeding the capacity may cause excessive heat generation

or ﬁre.

Securely plug the power cord into the power receptacle.

Insecure connection may cause ﬁre.

When installing the camera, fasten it securely and ﬁrmly.

A falling camera may cause personal injury.

Do not place conductive objects (e.g. screw drivers, coins,

metal items, etc.) or containers ﬁlled with water on top of

the camera. Doing so may cause personal injury due to ﬁre,

electric shock, or falling objects.

Do not install the unit in humid, dusty, or sooty locations.

Doing so may cause ﬁre or electric shock.

If any unusual smells or smoke come from the unit, stop

using the product. Immediately disconnect the power sorce

and contact the service center. Continued use in such a

condition may cause ﬁre or electric shock.

If this product fails to operate normally, contact the nearest

service center. Never disassemble or modify this product in

any way.

When cleaning, do not spray water directly onto parts of the

product. Doing so may cause ﬁre or electric shock.

WARNING

10.

Precaution

Operating

tBefore using, make sure power supply and all other parts are

properly connected.

tWhile operating, if any abnormal condition or malfunction

is observed, stop using the camera immediately and contact

your dealer.

Handling

tDo not disassemble or tamper with parts inside the camera.

tDo not drop the camera or subject it to shock or vibration as

this can damage the camera.

tClean the clear dome cover with extra care. Scratches and

dust can ruin the quality of the camera image.

Installation and Storage

tDo not install the camera in areas of extreme temperature,

exceeding the allowed range.

tAvoid installing in humid or dusty environments.

tAvoid installing in places where radiation is present.

tAvoid installing in places where there are strong magnetic

tAvoid installing in places where the camera would be subject

to strong vibrations.

tNever expose the camera to rain or water.



Important Safety Instructions

1. Read these instructions. - All these safety and operating instructions should be read before the product is

installed or operated.

2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference.

3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use instructions should be followed.

5. Do not use this device near water. - For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet

basement; near a swimming pool; etc.

6. Clean only with dry cloth. - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and

openings in the cabinet are provided for ventilation, to ensure reliable operation of the product, and to protect it

from over-heating. The openings should never be blocked by placing the product on bed, sofa, rug or other similar

surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper

ventilation is provided and the manufacturer’s unstructions have been adhere to.

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11.

12.

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14.

in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.



Disposal of Old Appliances

1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by

the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately form the municipal waste

stream stream in accordance to laws designated by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential negative consequences for

the environment and human health.

waste disposal service or the shop where you purchased the product.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interferenece at his own expense.



Introduction -

'FBUVSFT

v.1w$.044FOTPSBU3FBM5JNFGQT

v-JDFOTF1MBUF3FDPHOJUJPO5FDIOPMPHZDBQUVSFTSFGMFDUJWFMJDFOTFQMBUFTVQ

UPNQIXJUIVQUP$BQUVSF3BOHF

v3FMJBCMF1FSGPSNBODFVOEFS"OZ-JHIUJOH$POEJUJPOT

v7BSJGPDBM1*SJT-FOT_NN

v%VBM$PEFDT).+1&(XJUI4JNVMUBOFPVT%VBM4USFBN

v$PME4UBSU¡'¡$

v604NBSU*3XJUI*OUFMMJHFOU$BNFSB4ZOD

v4NBSU%/3%%JHJUBM/PJTF3FEVDUJPO

v1SPHSBNNBCMF1SJWBDZ;POFT

v"VUP(BJO$POUSPM"($

v"VUP8IJUF#BMBODF"8#

v.PUJPO%FUFDUJPO

v5XP8BZ"VEJP

v.JDSP4%4%)$4%9$$MBTT$BSE4MPUGPS&WFOUBOE$POUJOVPVT

3FDPSEJOH$BSE/PU*ODMVEFE

v"MBSN4FOTPS*OQVU

v3FMBZ0VUQVU

v8FC4FSWFS#VJMUJO

v1P&$MBTT3BOE%$7

v0/7*'$POGPSNBOU1SPGJMF4

v/P'PHPS$POEFOTBUJPO6OEFSBOZ8FBUIFS$POEJUJPOT

v*18FBUIFSBOE5BNQFS3FTJTUBOU

v:FBS8BSSBOUZ



Product & Accessories

Introduction -

Camera

Cables

Screw & Plastic Anchor-4pcs

Test Video Cable Quick ManualTemplate Sheet

Please check if all the camera and accessories are included in the package.

Torx Wrench

Waterproof cap & Gasket DC Plug Cable



Part Name

Introduction -

Bracket

Pan/Tilt Stoper Screw

Control Board

Con Cap

Alarm In/Out

Sunshield

Lens

Sunshield Adjusting Screws

RJ-45 Connector

Waterproof cap

Audio In/Out

DC Power Jack



Installation

Installation -

Before installing your camera, you have to read the following cautions.

1. You have to check whether the location can bear ve times of the weight of your camera.

2. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise

it may cause a breakdown or re.

3. When installing your camera, don’t allow any person to approach the installation site. If you have any

valuable things under the place, move them away.

Zoom Out

Zoom In

WIDE

TELE

Reset to the Factory Default

Press the reset button for 5 seconds to return the setup

to the factory default.

Warning

If you press the ‘Reset’ button, you will lose all setting

data. If needed, please, make a note for further

installation.

Using the Template sheet, make the cabling hole on

the wall/ceiling.

Connect the network cable, power cable respectively.

See the section ‘Installation - Cabling’ for details.

Fix the camera on the wall/ceiling by screw provided.

Loosen the Pan/Tilt stoper screw a litte before xing the camera.

By using the test video cable, check the screen during

installation. You can adjust the zoom ratio using the

T-W jog button.

SD Card Slot

Reset

T-W Jog Button

Test Video Output



Installation

Installation -

An LPR camera is designed to read a license plate only. When a license plate passes by the camera, the

reective lm on the plate will be reected back to the camera which gives youthe good clear shot of

the plate. You will ONLY capture an image of the plate.

US license plates need to be at least 216 pixels wide. This translates roughly into an image no wider than

5-6 feet assuming 1440p standard denition video.

The horizontal angle between the camera and plate should be

within 20° degrees. This means that if your camera is 10 feet

away from the plate, the plate cannot be more than 3 feet to the

right or left of the camera.

The vertical angle between the camera and plate is within 30°

degrees. This means that if your camera is 10 feet away from the

plate and the plate is 3 feet o the ground, the camera cannot

be mounted more than 8 feet high.

Attempting to position the security camera at odd angles or

exceeding the distance capabilities will result in a poor shot of

the plate.

The DVR’s recording fps should be at the highest to assure best

capture quality.

THE CAMERA SHOULD BE MOUNTED AT AN ANGLE NO GREATER THAN 30 DEGREES

Andere Handbücher für DWC-MB44iALPR

Inhaltsverzeichnis

Andere Digital Watchdog Sicherheitskamera Handbücher

Digital Watchdog

Digital Watchdog MEGApix IVA Bedienungsanleitung

Digital Watchdog

Digital Watchdog MD421TIR/B Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA853WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Starlight D1363D922 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-C232D Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix DWC-MVT4WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog Infinity V3367WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-D1363D922 Leitfaden

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-MC553WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light DWC-V7253WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Megapix DWC-MV72I4V Bedienungsanleitung

Digital Watchdog

Digital Watchdog B3252DIR Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT AHD DWC-V7753WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MPH2W28TW Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix IVA DWC-MB84Wi4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MPVA5WiAT Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-VA853WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix Flex DWC-PVX16W2 Bedienungsanleitung

Digital Watchdog

Digital Watchdog B3252DIR Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog Snapit DWC-V4363D Bedienungsanleitung

Digital Watchdog

Digital Watchdog PTZ39XFM Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog D1373D Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-V1312XW Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung