Digital Watchdog DWC-VS753WT Bedienungsanleitung

06/2016

ABOUT MANUAL

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

HIGH DEFINITION ANALOG

Multi-Sensor Outdoor Dome

Camera

DWC-VS753WT

3WT

SAFETY INFORMATION

Warning Precaution

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION:

CAUTION

RISK OF ELECTRIC

SHOCK. DO NOT OPEN.

WARNING

This symbol indicated that dangerous

voltage consisting a risk of electric

shock is present within this unit.

This exclamation point symbol is intended to alert the

user to the presence of important operating and

maintenance (service) instructions in the literature

accompanying the appliance.

Warning

Magnets could affect the function of pacemakers and implanted heard defibrillator.

A pacemaker could switch into test mode and cause illness.

A heart defibrillator may stop working.

If you wear these devices, keep a sufficient distance from the magnets.

Warn others who wear these devices from getting too close to the magnets

To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain

or moisture.

1. Be sure to use only the standard adapter that is specified in the specifications. Using any other adapter

could cause fire, electrical shock, or damage to the product.

2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock,

or damage to the product.

3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause excessive heat

generation or fire.

4. Securely plug the power cord into the power receptacle. Insecure connection may cause fire.

5. When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.

6. Do not place conductive objects (e.g. screw drivers, coins, metal items, etc.) or containers filled with water

on top of the camera. Doing so may cause personal injury due to fire electric shock, or falling objects.

WARNING (CONT.)

SAFETY INFORMATION

7. Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.

8. If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the

power source and contact the service center. Continued use in such a condition may cause fire or electric shock.

9. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify

this product in any way.

10. When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or

electric shock.

PRECAUTION

Operating

Handling

Installation and Care

• Before using, make sure power supply and all other parts are properly connected.

While operating, if any abnormal condition or malfunction is observed, stop using the camera immediately

and contact your dealer.

Do not disassemble or tamper with parts inside the camera.

Do not drop the camera or subject it to shock or vibration as ths can cause damage to the camera.

Clean the clear dome cover with extra care. Scratches and dust can ruin the quality of the camera image.

Do not install the camera in areas of extreme temperature, exceeding the allowed range.

Avoid installing in humid or dusty environments.

Avoid installing in places where radiation is present.

Avoid installing in places where there are strong magnetic fields and electric signals.

Avoid installing in places where the camera would be subject to strong vibrations.

Never expose the camera to rain or water.

•

TABLE OF CONTENTS

Introduction

Installation

Module OSD Menu

Troubleshooting

Warranty Information

Specifications

Features

Parts and Descriptions

Dimensions

Inside the Box

Installation Instructions

Connecting to Monitors 12

Cabling

10-11

16-27

29-30

Adjusting the Camera Angle 14-15How to Access the Camera’s OSD Menus

FEATURES*

High Definition Analog (HD Analog) HD over Coax Technology

Four Cameras in One, One Installation

4x Panasonic® 1/3" CMOS Sensor

Flexible Sensor Positioning with Magnets

8 Megapixel Resolution at 30fps (4x 2.1MP)

4x 2.8mm, 4.0mm, 6.0mm and 8.0mm Fixed Lenses Options

Customizable 2.8mm, 4.0mm, 6.0mm and 8.0mm Lens Options

OSD Control Via Coaxial (UTC)

Easy Icon Driven OSD Menu with Built-in Joystick

Secondary Video-BNC Output

STAR-LIGHT™ Super Low Light Technology

True Day/Night Mechanical IR Cut Filter

Dynamic Range Compressor (DRC) Reveals Low Light Detail

Wide Dynamic Range (WDR)

Smart DNR™ 3D Digital Noise Reduction

Highlight Masking Exposure (HME)

Programmable Privacy Zones

Auto Gain Control (AGC)

Backlight Compensation (BLC)

Auto White Balance (AWB)

RS-485 Built-in

Auto Sensing 24VAC/12VDC with Line Lock

De-Fog™ Extreme Weather Image Compensation

IP66 Certified (Weather Resistant)

PARTS & DESCRIPTION*

POWER

HD Analog1CH

HD Analog2CH

HD Analog3CH

HD Analog4CH

Alarm Input

RS485

OSD Joystick

BNC Local Output Switch

Test Monitor Cable Slot

camera modules

Magnetic Track

DIMENSIONS IN MILLIMETERS (IN)*

95.8 (3.77”)

89.50

(3.5”)

INSIDE THE BOX*

Included with your camera:

Camera Cables

Screw &

Plastic Anchor-4pcs

Torx Wrench

Installation ManualMounting Template

INSTALLATION* Template Sheet

1. Using the mounting plate or the camera’s bottom case,

mark and drill holes into the mounting surface.

2. Pull wires through and make all necessary connections.

See pages 9-10 for more information.

3. Using the four (4) included screws, mount the camera’s

bottom case to the mounting surface.

4. Adjust the camera module on the magnetic surface for

the ultimate coverage and view. Each camera module snaps

into position using the magnetic track, allowing for

maximum customization and fully adjustable views. See

page 12 for tilting and adjustment specications.

5. Secure the cover dome to the camera’s bottom case using

the torx wrench.

6. Remove the protective lm from the camera’s dome to

complete the installation.

INSTALLATION-CONNECTING CABLES*

1Power

7RS485

6ALARM

2AHD 1CH

3AHD 2CH

4AHD 3CH

5AHD 4CH

1. Power: connect the camera to a proper power supply. The camera supports both 12VDC

and 24VAC. Below are the maximum power supplies for the camera:

DC12V : 8.36W

AC24V : 8.36W

2~5. AHD BNC Outputs 1~4: Connect each of the camera’s lenses as a separate output to a

DVR supporting AHD signal such as the VMAX A1. On the DVR side, each lens will be set as a

dierent channel.

Use the diagram below to connect the camera to external devices:

Inhaltsverzeichnis

Andere Digital Watchdog Sicherheitskamera Handbücher

Digital Watchdog

Digital Watchdog Star-light Plus DWC-B6883WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT AHD DWC-D3763TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-V4783WD Bedienungsanleitung

Digital Watchdog

Digital Watchdog MC355T Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MC352 Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MF5Wi4TWDMP Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DW-MV82WiA Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MPB72Wi4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGAPIX DWC-MT94WI28T Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MB45Wi650T Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT DWC-B7753TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Infinity C233W Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-HD321M4TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-D4583WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light DWC-MC253WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Infinity B1367WTIR650 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MB44iALPR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-V6563WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-B6263WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-PTZ37XAL Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-B5661TIR550 Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-V7553W Bedienungsanleitung

Digital Watchdog

Digital Watchdog Snapit DWC-HD421D Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung