Digital Watchdog Star-Light DWC-V7253 Bedienungsanleitung

Quick Start Guide Quick Start Guide

1. The mounting surface must withstand ﬁve times the weight of

your camera.

2. Do not let the cables get caught in improper places or the electric

line cover can be damaged. This may cause a short or ﬁre.

3. Detach the camera’s dome cover by loosening the three (3) screws

on the dome using the included torque wrench.

4. Use the mounting template to mark and drill the necessary holes in

the mounting surface.

STEP 1 – PREPARING TO MOUNT THE CAMERA

Pass the wires through the mount bracket and make all

necessary connections. Connect the BNC cable and power

cables to the camera.

STEP 2 – CABLING THE CAMERA TO

EXTERNAL DEVICES

Power requirements Power consumption

12VDC ON LY !

CAUTION! The camera supports

DC power supply only

DC12V: 1.92W

Tel: +1 (866) 446-3595 / (813) 888-9555

Technical Support Hours:

9:00AM – 8:00PM EST, Monday thru Friday

digital-watchdog.com

DWC-V7253

WHAT’S IN THE BOX

Mount bolts

and nuts 1 set Mounting

template 1

Hex Allen

wrench 1Quick set up

Guide 1

Screws

and plastic

anchors

-2pcs

1 set Test video

cable 1

Protective sheet

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Manual

Template Sheet

for installing by Bolt & Nut

Mount Bolt & Nut

Screw &

Plasc Anchor-2pcs

Torx Wrench

Test Video Cable

Attention: This document is intended to serve as a quick reference for

initial set up. It is recommended that the user read the entire instruction

manual for complete and proper installation and usage.

NOTE: Download all your support materials and tools in one place.

1. Go to: http://www.digital-watchdog.com/resources

2. Search your product by entering the part number in

the ‘Search by Product’ search bar. Results for

applicable part numbers will populate automatically

based on the part number you enter.

3. Click ‘Search’. All supported materials, including manuals

and quick start guide (QSGs) will appear in the results.

Template Sheet

Protective sheet

DW® Universal HD over Coax®

ultra low-proﬁle vandal dome cameras

Quick Start Guide

1. The camera supports HD-Analog, HD-CVI and HD-TVI signals. To

switch between the signals:

a. Remove the camera’s dome to access the joystick and OSD

control on the base of the camera.

b. Use the OSD Switch to switch the camera’s signal.

1. Once all cables have been connected, use the screws included

with the camera to properly mount and secure the camera to the

mounting surface.

2. Adjust the camera’s pan, tilt and position to achieve the desired

view. The cameras’ max angles are:

Pan: 0° ~ 360°

Tilt: 0° ~ 70°

Rotation: 0° ~ 360°

3. Once the installation is complete, remove the protective ﬁlm from

the camera’s dome cover.

STEP 4 – INSTALLING THE CAMERASTEP 3 – CHANGING THE SIGNAL IN

THE CAMERA

Rev Date: 09/19

Speciﬁcations and pricing are subject to change without notice.

Template

Sheet

1. Using the bolt and nut mounting template, mark and drill the

necessary holes in the mounting surface.

2. Pass wires through and make all connections (see STEP 2 for more

information).

3. Secure the two long mounting screws to the camera’s base.

4. Mount the camera to the mounting surface by using the 2

mounting nuts.

5. Rotate the locking discs over the screws until the camera is held

tightly from the mounting surface.

For a bolt and nut installation:

Rotation 360°

Titling 70°

Panning 360°

DOWN

- To switch the camera to

HD-TVI mode, press OSD

joystick to the left

for 5 seconds.

- To switch the camera to

HD-Analog mode, press OSD

joystick to the right

for 5 seconds.

- To switch the camera to CVBS

mode, press OSD joystick up

for 5 seconds.

- To switch the camera to

HD- CVI mode, press OSD

joystick down for 5 seconds.

Andere Handbücher für Star-Light DWC-V7253

Andere Digital Watchdog Sicherheitskamera Handbücher

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MV9JUNC Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGApix DWC-MD72Di28T Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PVF5M1TIRC6 Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light DWC-MC253WT-28 Bedienungsanleitung

Digital Watchdog

Digital Watchdog D4252 Series Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PZ21M69T Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-LPR650UW Bedienungsanleitung

Digital Watchdog

Digital Watchdog Snapit DWC-V4363D Bedienungsanleitung

Digital Watchdog

Digital Watchdog STAR-LIGHT Universal HD over Coax... Bedienungsanleitung

Digital Watchdog

Digital Watchdog MEGAPIX PANO DWC-PVF5M1TIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog Snapit DWC-V4382D Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-C223W Bedienungsanleitung

Digital Watchdog

Digital Watchdog MC421D Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-PV2M4T Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-MC553WTIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog V1362DIR Bedienungsanleitung

Digital Watchdog

Digital Watchdog D1373D Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-MB45Wi650T Bedienungsanleitung

Digital Watchdog

Digital Watchdog Starlight V3363DH Bedienungsanleitung

Digital Watchdog

Digital Watchdog B2373D Bedienungsanleitung

Digital Watchdog

Digital Watchdog DWC-LPR650U Bedienungsanleitung

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung