Digitus ESATA CARDBUS ADAPTER Bedienungsanleitung

1

eSATA

CARDBUS ADAPTER

User Manual

2

Features and Benefits

Silicon Image SiI 3512 chipset

Compliant with Serial ATA Specifications rev. 1.0

PCMCIA CardBus Interface with Power Management

Provides two independent channels to support to two Serial ATA

drives

Support Serial ATA data transfer rates up to 150MB/sec

Breaks the 137GB barrier! Supports various brands of large

capacity Serial ATA hard disk drives

Supports Windows 7, Vista, XP, 2000

Bus Interface

32-bit PCMCIAType II

Connectors

2 x external eSATA connectors

System Requirements

Windows 7, Vista, XP, 2000

Available CardBus Type II Slot

3

Hardware Installation

General instructions for installing the card are provided below. Since

the design of system may vary, refer to your system’s reference manual

for further information, if needed.

1. Power off your notebook computer.

2. Insert the eSATA CardBus Adapter into the Type II PC Card slot

of your notebook computer. Make sure it is inserted all the way in

for a solid connection.

3. Power on your notebook computer.

Driver Installation

For Windows® 2000

1. At Found New Hardware Wizard, click Next.

2. Select Search for a suitable driver for my device(recommend)

then click Next.

3. Insert the driver CD, check CD-ROM drives, uncheck the other

boxes, click Next, then click Next again.

4. If the Digital Signature Not Found message appears, click Yes.

Our driver has been thoroughly tested for stability and

4

compatibility.

5. Click Finish.

For Windows® XP/Server 2003

1. At the Found New Hardware Wizard:

XP(w/SP1 or earlier)/Server 2003: continue to step #2

XP(w/SP2 or later)/Server 2003(w/SP1 or later): select No, not

this time, then click Next.

2. Insert the driver CD, select Install the software automatically

(Recommended), and click Next.

3. Click Finish.

For Windows® Vista

1. At Found New Hardware Wizard, select Locate and install

driver software (recommended).

2. Insert the driver CD, click Next.

3. If the system prompts the user informing the drivers are not

signed, select the option Install this driver software anyway.

4. Click Close to complete the installation.

5

To Verify Windows® Installation

1. Right click My Computer and click Manage.

2. Select Device Manager.

3. Double click SCSI and RAID Controller, then double click

Silicon Image SiI 3512 SATALink Controller to display driver

properties. A message this device is working properly is displayed

in the dialog box, the driver has been correctly installed.

Inhaltsverzeichnis

Andere Digitus Adapter Handbücher

Digitus

Digitus DA-70843 Bedienungsanleitung

Digitus

Digitus DN-10050-1 Bedienungsanleitung

Digitus

Digitus DN-10180 Bedienungsanleitung

Digitus

Digitus DA-70854 Bedienungsanleitung

Digitus

Digitus DA-70200-1 Bedienungsanleitung

Digitus

Digitus DN-70031 Bedienungsanleitung

Digitus

Digitus DA-70453 Bedienungsanleitung

Digitus

Digitus WNP-UA300-01 Bedienungsanleitung

Digitus

Digitus DA-70852 Bedienungsanleitung

Digitus

Digitus DA-70840 Bedienungsanleitung

Digitus

Digitus DN-7042-1 Bedienungsanleitung

Digitus

Digitus DN-95132 Bedienungsanleitung

Digitus

Digitus DN-30211 Bedienungsanleitung

Digitus

Digitus DA-70250-1 Bedienungsanleitung

Digitus

Digitus DA-10060 Bedienungsanleitung

Digitus

Digitus DN-3023 Bedienungsanleitung

Digitus

Digitus DN-7074 Bedienungsanleitung

Digitus

Digitus DA-10196 Bedienungsanleitung

Digitus

Digitus DA-70451 Bedienungsanleitung

Digitus

Digitus DA-70839 Bedienungsanleitung

Digitus

Digitus DN-7053 Bedienungsanleitung

Digitus

Digitus U1233 Bedienungsanleitung

Digitus

Digitus DN-10150-1 Bedienungsanleitung

Digitus

Digitus Wireless 150N PCI Adapter Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung