Digitus BR-6478AC Bedienungsanleitung

Package Contents .......................................................................... Page 1

Build Network Connections ......................................................... Page 2

Network Setup ............................................................................... Page 3

Package Contents

Before starting to use this router, please check if there’s anything missing in the package, and

contact your dealer of purchase to claim for missing items:

□ Broadband Gigabit Router (main body, 1 pcs)

□ Quick Installation Guide (1 pcs)

□ User Manual CD-ROM (1 pcs)

□ A/C PowerAdapter (12VDC / 1.5A) (1 pcs)

□Operating Temperature (32 °F to 104 °F (0 °C to 40 °C)

Quick Installation Guide

AC1200 Wireless LAN Concurrent

Dual Band Gigabit Router

1WAN + 4LAN

Build Network Connections

Please follow the following instructions to setup wireless router:

1. Connect your xDSL / Cable modem to the WAN port of router by Ethernet cable.

2. Connect all your computers, network devices (network-enabled consumer devices other than

computers, like game console, or switch / hub) to the LAN port of the router.

3. Connect the A/C power adapter to the wall socket, and then connect it to the ‘Power’socket

of the router.

Please check all LEDs on the front panel. ‘PWR’LED should be steadily on, WAN and LAN

LEDs should be on if the computer / network device connected to the respective port of the

router is powered on and correctly connected.

If ‘PWR’LED is still off and you’re sure that all cable connections are connected properly,

please contact your dealer of purchase for assistance.

Network Setup

Please use the web browser to configure the wireless router. A computer with wired

Ethernet connection to the wireless router is required for this first-time configuration.

1. Set your computer to obtain an IP

address from wireless router: click

‘Start’ button (it should be located at

lower-left corner of your computer),

then click control panel. Click

Network and Sharing Center, then

click Local Area Connection. Click

‘Properties’.

2. Local Area Connection

Properties window will appear. Select

Internet Protocol (TCP/IP), then click

‘Properties’.

3. Select ‘Obtain an IP address

automatically’ and ‘Obtain DNS server

address automatically’, then click

‘OK’.

4. After the IP address setup is

complete, please click ‘Start’ -> ‘Run’

at the bottom-lower corner of your

desktop, then input ‘cmd’ and click

‘OK’.

5. Input ‘ipconfig’, then press

‘Enter’ key. Please check the

IP address followed by

‘Default Gateway’ (In this

example, the IP address of

router is 192.168.2.1)

Please note that this value

may be different.

6. Start the web browser and input the

IP address of wireless router in

address bar, and the following

message should be shown. Please

input user name and password, then

click ‘OK’ to access web management

interface of wireless router.

Default User name: admin

Default Password: 1234

7. Click ‘Quick Setup’

8. Select time

zone of the area

where you live,

then click ‘NEXT’.

HERE!

9. Select a broadband type of the

Internet connection you’re using, then

click ‘NEXT’.

10. Please input the Internet

connection parameters, you should

use the value provided by your

Internet service provider.

Click ‘OK’ when you finish.

(The content of this page will vary

depends on the connection method

you selected in step 9)

11. Click ‘APPLY’.

12. When you see this message, the

router will be ready with new settings

within 40 seconds.

13. Please use your computer to connect to any website on Internet, or start any

Internet application and see if they’re working properly.

For instructions of advanced settings and wireless network setup, please refer to user

manual in supplied CD-ROM.

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

zConsult the dealer or an experienced radio/TV technician for help.

RF Exposure Warning

The equipment complies with RF exposure limits set forth for an uncontrolled environment. The

antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

This equipment should be installed and operated with a minimum distance of 20 centimeters between

the radiator and your body.

Inhaltsverzeichnis

Andere Digitus Netzwerk-Router Handbücher

Digitus

Digitus DN-80117 Bedienungsanleitung

Digitus

Digitus GreyRapid N DN-7049-1 Bedienungsanleitung

Digitus

Digitus DN-7039-B Bedienungsanleitung

Digitus

Digitus GreyRapid N Bedienungsanleitung

Digitus

Digitus EASY WEASEL DN-7062 Bedienungsanleitung

Digitus

Digitus DN-70184 Bedienungsanleitung

Digitus

Digitus DN-15017 Bedienungsanleitung

Digitus

Digitus DN-8007C1 Bedienungsanleitung

Digitus

Digitus DN-8006C1 Bedienungsanleitung

Digitus

Digitus DN-7017 Bedienungsanleitung

Digitus

Digitus DN-95330 Bedienungsanleitung

Digitus

Digitus EASY WEASEL Bedienungsanleitung

Digitus

Digitus DS-23200 Bedienungsanleitung

Digitus

Digitus DN-15019-2 Bedienungsanleitung

Digitus

Digitus DN-11004-O Bedienungsanleitung

Digitus

Digitus 15019-2 Bedienungsanleitung

Digitus

Digitus DN-651103 Bedienungsanleitung

Digitus

Digitus DN-50011 Bedienungsanleitung

Digitus

Digitus DN-80110 Bedienungsanleitung

Digitus

Digitus DN-7039 Bedienungsanleitung

Digitus

Digitus DN-60021-2 Bedienungsanleitung

Digitus

Digitus DN-95346 Bedienungsanleitung

Digitus

Digitus DN-11009 Bedienungsanleitung

Digitus

Digitus DN-60011-1 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung