Digitus DN-80110 Bedienungsanleitung

24-Port 10/100/1000Mbps + 2 SFP

Green Ethernet Switch

Manual

DN-80110

Description

DN-80110 24port 10/100/1000M + 2SFP Slots Ethernet Switch provides the

seamless network connection. This device integrates 1000Mbps Gigabit Ethernet,

100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible

package. The Switch with a low-cost, easy-to-use, high performance upgrades your

old network to a 1000Mbps Gigabit network. Based on Gigabit Ethernet Technology,

It is essential to helping solve network bottlenecks that frequently develop as more

advanced computer users and newer applications continue to demand greater

network resources. Support IEEE802.3az energy efficient Ethernet (EEE), reduce

power consumption by detection cable length and operating loading, auto adjust

signal intensity, Reduce energy consumption, and protect the environment.

The switch is easy to install and use. It requires no configuration and installation. It is

a great selection for expanding office network.

Features

Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3az

standards

Supports up to 16K MAC address

Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for

Half-duplex Mode

Support packet length 9216 bytes jumbo frame packet forwarding at wire speed

24 x 10/100/1000Mbps Auto MDI/MDI-X Ethernet port

Two 1000Mbps SFP Slots

LED indicators for monitoring power, link/activity

Chapter 1 Product Introduction

Congratulations on your purchasing of the Gigabit Ethernet Switch. Before you install

and use this product, please read this manual carefully for full exploiting the functions

of this product.

1.1 Product Overview

The 24-port Gigabit + 2 SFP Slots Ethernet Switch provides the seamless network

connection. This device integrates 1000Mbps Gigabit Ethernet, 100Mbps Fast

Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. The

Switch with a low-cost, easy-to-use, high performance upgrades your old network to a

1000Mbps Gigabit network. Based on Gigabit Ethernet Technology, It is essential to

helping solve network bottlenecks that frequently develop as more advanced

computer users and newer applications continue to demand greater network

resources. Support IEEE802.3az energy efficient Ethernet (EEE), reduce power

consumption by detection cable length and operating loading, auto adjust signal

intensity, Reduce energy consumption, and protect the environment.

The Switch is easy to install and use. It requires no configuration and installation. It is

a great selection for expanding office network.

1.2 Features

Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3az

standards

Supports up to 16K MAC address

Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for

Half-duplex Mode

Support packet length 9216 bytes jumbo frame packet forwarding at wire speed

24 x 10/100/1000Mbps Auto MDI/MDI-X Ethernet port

Two 1000Mbps SFP Slots

1.3 Package Contents



One

24 port Gigabit + 2 SFP Slots Ethernet Switch



Four rubber feet, two mounting ears and eights screws



One AC power cord



One User Manual

Chapter 2 External Component Description

2.1 Front Panel

The front panel of the Switch consists of series of LED indicators, 24

10/100/1000Mbps RJ-45 ports and 2 SFP ports a shown as below.

Figure 1 - Front Panel

10/100/1000Mbps RJ-45 ports (1~24):

Designed to connect to the device with a bandwidth of 10Mbps,100Mbps or

1000Mbps. Each has a corresponding 10/100/1000Mbps LED.

SFP ports (SFP1, SFP2):

The interface card provides an interface so that you can insert a transceiver module

(SFP) into the interface and connect it to the interface of another switch with cables.

LED indicators:

The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential

problem with the Switch, connection or attached devices.

Figure 2 - LED Indicators

The following chart shows the LED indicators of the Switch along with explanation of

each indicator.

2.2 Rear Panel

The rear panel of the Switch contains AC power connector

For shown as below:

Figure 3 - Rear Panel

AC Power Connecto

supports AC 100~240V, 50~60Hz.

LED COLOR STATUS STATUS DESCRIPTION

Power

Green

On Power On

Off Power off

Link/Act

Green

On Connect to the port

Off Disconnect to the port

Flashing Sending or receiving data

1000M

Green

On A 1000Mbps device is connected to

the port

Off

A 10/100Mbps device is connected

to the port or no device is

connected to the port

SFP

Green

On Connect to the port

Off Disconnect to the port

Flashing Sending or receiving data

Chapter 3 Installing and Connecting the Switch

This part describes how to install your Ethernet Switch and make connections to it.

Please read the following topics and perform the procedures in the order being

presented.

3.1 Installation

Please follow the following instructions in avoid of incorrect installation causing device

damage and security threat.

Put the Switch on stable place or desktop in case of falling damage.

Make sure the Switch works in the proper AC input range and matches the

voltage labeled on the Switch.

To keep the Switch free from lightning, do not open the Switch’s shell even in

power failure.

Make sure that there is proper heat dissipation from and adequate ventilation

around the Switch.

Make sure the cabinet to enough back up the weight of the Switch and its

accessories.

3.1.1 Desktop Installation

Sometimes users are not equipped with the 19-inch standard cabinet. So when

installing the Switch on a desktop, please attach these cushioning rubber feet

provided on the bottom at each corner of the Switch in case of the external vibration.

Allow adequate space for ventilation between the device and the objects around it.

3.1.2 Rack-mountable Installation in 19-inch Cabinet

The Switch can be mounted in an EIA standard-sized, 19-inch rack, which can be

placed in a wiring closet with other equipment. To install the Switch, please follow

these steps:

a. Attach the mounting brackets on the Switch’s side panels (one on each side) and

secure them with the screws provided.

b. Use the screws provided with the equipment rack to mount the Switch on the rack and tighten

it.

3.1.3 Power on the Switch

The Switch is powered on by the AC 100-240V 50/60Hz internal high-performance

power supply. Please follow the next tips to connect:

AC Electrical Outlet: It is recommended to use single-phase three-wire receptacle

with neutral outlet or multifunctional computer professional receptacle. Please make

sure to connect the metal ground connector to the grounding source on the outlet.

AC Power Cord Connection: Connect the AC power connector in the back panel of

the Switch to external receptacle with the included power cord, and check the power

indicator is ON or not. When it is ON, it indicates the power connection is OK.

3.2 Connect Computer (NIC) to the Switch

Please insert the NIC into the computer, after installing network card driver, please

connect one end of the twisted pair to RJ-45 jack of your computer, the other end will

be connected to any RJ-45 port of the Switch, the distance between Switch and

computer is around 100 meters. Once the connection is OK and the devices are

power on normally, the Link/ACT status indicator lights corresponding ports of the

Switch.

Specification

Model DN-80110

Chipset RTL8382L+RTL8218

Standards IEEE 802.3, IEEE 802.3u, IEEE802.3ab,

IEEE802.3x, IEEE802.3az

Network Media (Cable)

10Base-T: UTP category 3, 4, 5 cable (maximum

100m)

EIA/TIA-568 100Ù STP (maximum 100m)

100Base-Tx: UTP category 5, 5e cable (maximum

100m) EIA/TIA-568 100Ù STP (maximum 100m)

1000Base-T: UTP category 5e, 6 cable (maximum

100m)

Number of Ports 24 x 10/100/1000Mbps Auto-Negotiation ports

LED

indicators

Link/Act/speed Link/Act: Green, 1000M: Green, SFP: Green

Other Power: Green

Transfer Method Store-and-Forward

Switching Capacity 52G

MAC Address Learning Automatically learning, automatically Update 16K

Table

Frame Filtering and Forward

Rate

10Mbps: 14880pps,

100Mbps:148800pps,

1000Mbps: 1488000pps

Dimensions (W × D × H) 440x205x44mm (19” metal case)

Environment

Operating Temperature: 0℃- 40℃

Storage Temperature: -40℃- 70℃

Operating Humidity: 10%~90% non-condensing

Storage humidity: 5%~90% non-condensing

Power Supply AC 100V~240V 50/60HZ (Internal Power supply)

Power consumption Max 20(watts)

www.assmann.com

ASSMANN Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Inhaltsverzeichnis

Andere Digitus Netzwerk-Router Handbücher

Digitus

Digitus DN-8006C1 Bedienungsanleitung

Digitus

Digitus DN-95346 Bedienungsanleitung

Digitus

Digitus DN-11004-O Bedienungsanleitung

Digitus

Digitus GreyRapid N DN-7049-1 Bedienungsanleitung

Digitus

Digitus EASY WEASEL DN-7062 Bedienungsanleitung

Digitus

Digitus DN-50011 Bedienungsanleitung

Digitus

Digitus DN-7017 Bedienungsanleitung

Digitus

Digitus DN-60011-1 Bedienungsanleitung

Digitus

Digitus DN-95301 Bedienungsanleitung

Digitus

Digitus DN-95323 Bedienungsanleitung

Digitus

Digitus DN-60012 Bedienungsanleitung

Digitus

Digitus BR-6478AC Bedienungsanleitung

Digitus

Digitus DN-70184 Bedienungsanleitung

Digitus

Digitus DN-60021-2 Bedienungsanleitung

Digitus

Digitus DN-80117 Bedienungsanleitung

Digitus

Digitus DN-8007C1 Bedienungsanleitung

Digitus

Digitus DN-7039-B Bedienungsanleitung

Digitus

Digitus DN-15017 Bedienungsanleitung

Digitus

Digitus EASY WEASEL Bedienungsanleitung

Digitus

Digitus GreyRapid N Bedienungsanleitung

Digitus

Digitus DN-95330 Bedienungsanleitung

Digitus

Digitus DN-95312 Bedienungsanleitung

Digitus

Digitus WHITE WEASEL MOBILITY Bedienungsanleitung

Digitus

Digitus DS-23200 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung