Digitus DN-16027 Bedienungsanleitung

DIGITUS Plug&View

OptiVision / OptiArc / OptiMax

User Manual

DN-16027 / DN-16036 / DN-16037

DN-16036

DN-16037

DN-16027

1. Introduction:

DIGITUS Plug&View series of IP cameras offers P2P Cloud service to avoid those complicated

network setting for camera installation. All you need is just “Plug&View” with the 3 simple steps.

2. Package Content:

-IP camera x 1

-Power supply x 1

-Ethernet cable x 1

-Support CD x 1

-Mounting accessory x 1

3. Installation Procedures:

3.1 Getting connected

1. Power on the camera and connect the Ethernet cable from the camera to the router.

Please make sure that the router is setup to be able to access Internet.

2. Open a browser (Internet Explorer, Google Chrome, Mozilla Firefox...) and key in

http://mydigitus.net/ to access DIGITUS Plug&View Website.

Please login your account and password if you already have a Google Account (gmail

account). Otherwise, please create a new Google account.

Alternatively you can also download “DIGITUS Plug&View” APP from APP store or

Google Play and execute this APP from your mobile devices and login the account and

password instead of using browser.

3. With browser, please key in the MAC address and Activation code as shown on the 1st page

of the QIG to add camera under your account. After press “Apply”, it will show “Success”.

Alternatively the easiest way to add camera without key-in long numbers is using the smart

phone to scan the QR code on the 1st page of this QIG using “DIGITUS Plug&View” APP from

your mobile devices.

After adding the camera, now you can have live-view anytime anywhere.

3.2 Getting connected wirelessly

Wireless (WiFi) connection between IP cameras and Wireless router / Access point is also

available with the following procedures.

4. After completing Step 1 ~ 3 for wired connection with Ethernet cable, login into

http://www.mydigitus.net/ and click the setting icon to enter camera user interface.

Then you will enter the Web User Interface of the cameras.

Please key in “admin” for the account and password to log in.

5. Go to “Parameter” => “Network”. Change NetMode to “WiFi” and enable “DHCP”.

Press “scan” to search the Wireless router or Access point in the environment and select the

desired wireless device to connect.

Please key in the password of the wireless router / Access Point.

6. Change Route to “WiFi” and press “OK” to take effect of the new WiFi setting. Then close this

camera user interface window and unplug the Ethernet cable. Now you can access the

camera wirelessly via Plug&View APP or through http://mydigitus.net

4.0 Change Device Name

Go to Settings and click Config button to lead to a Modify page for each camera. You may

change the name to any desired description.

5.0 Tool bar description

Tool bar is located on the up-right-side of each IP cam media screen to foster

an easy management at your preference.

5.1 Light Signal

Green Signal

When you read the green light that means the IP cam is online and on air, therefore,

its video is successfully displayed on the screen.

Yellow Signal

When you read the yellow light that means the IP cam is online but not yet on air,

therefore, its video is not displayed on the screen.

Red Signal

When you read the red light that means the IP cam is offline, therefore,

the screen is blank.

5.2 Full Screen

Full screen button is to lead you to a new screen layer where the video is displayed

in full screen for the clearer vision and event play back function.

5.3 Live View & PTZ

“Live view” button is to view the selected IP cam’s media in a timely manner. You may

also select to view the different camera’s media from the “camera list” displayed on the

left-hand side of the screen. Click the arrow buttons and to select more IP

cams from the list.

Click located on the top-right hand side of the screen to exit the full screen function, or

click located on the right-bottom side of the screen to get back to the matrix view

page.

You may click to reload the live view media if you encounter problem getting it. Each

selected camera’s configuration can be accessed by clicking on the right-bottom

side of the screen.

When the selected IP cam supports PTZ function, its PTZ control panel will be displayed

for you to manage camera angle on the right-bottom side of the screen. Otherwise, the

panel will be displayed in grey to indicate it is not functioning. Each angle adjustment

requires one click to make. is to back to the original setting position, while is

to zoom in the camera, and is to zoom out.

5.4 Play Back

“Play back” function is only supported when IP cam is embedded with SD card for

media recording. All the recorded events can be retrieved from the blue mark displayed in

timeline.

All recorded events are stored and marked in the timeline as in blue tag. You may

manage to view them in different time length: by clicking hour, day or week located on the

top-left hand side of the timeline.

The detailed recorded clips will be displayed when mouse over on the blue tag and the

tag turned to be in orange. You can the select a specific clip to review at your wish.

While playing back the selected media clip, you may also manage it to be stopped,

paused, move one clip forward or backward from the media control panel. Or, you may

also drag the progress bar cursor to the specific playing point at your preference.

5.5 Cloud

“Cloud” is utilized as a backup service to copy those video clips stored in camera’s SD

card and save on to your personal Google Drive. Before you can review the clips stored in

this “Cloud” service, you need to have a Google account and sign in.

Setting

Setting button is to lead you to that specific IP cam’s setting web UI.

Mute

Mute or un-mute buttons are used to control whether the users would like to hear

the voice receiving via camera or not.

Refresh

Refresh button is for you to refresh or reload the IP cam video.

Remove

Remove button is the button for you to remove this specific IP cam media in

Overview page.

6.0 Camera User Interface

After entering Camera User Interface from DIGITUS Plug&View website through setting icon

, please key in “admin” for the Username and Password to login.

At the first viewing of the IP camera, the browser will prompt the users to install the OCX

component.

Note: If the users didn’t install the ‘OCX’ before, please click the link on the page: ‘Please install

the ActiveX widget RSAV.exe’. Or directly in the upper right corner to download OCX

Andere Handbücher für DN-16027

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Digitus Sicherheitskamera Handbücher

Digitus

Digitus network bullet camera Bedienungsanleitung

Digitus

Digitus ADVANCED HD NETWORKFIXED DOME CAMER Bedienungsanleitung

Digitus

Digitus DN-16084 Bedienungsanleitung

Digitus

Digitus IP Network Camera None Bedienungsanleitung

Digitus

Digitus DN-16027 Bedienungsanleitung

Digitus

Digitus DN-16050 Bedienungsanleitung

Digitus

Digitus Plug&View DN-16038 Bedienungsanleitung

Digitus

Digitus DN-16062 Bedienungsanleitung

Digitus

Digitus DN-16027 Bedienungsanleitung

Digitus

Digitus DN-18604 Bedienungsanleitung

Digitus

Digitus Plug&View OptiView DN-16028 Bedienungsanleitung

Digitus

Digitus DN-16026 Bedienungsanleitung

Digitus

Digitus DN-16083 Bedienungsanleitung

Digitus

Digitus ADVANCED NETWORK SURVEILLANCE CAMERA Bedienungsanleitung

Digitus

Digitus DN-16052 Bedienungsanleitung

Digitus

Digitus NETWORK CAMERA Bedienungsanleitung

Digitus

Digitus DN-16082-1 Bedienungsanleitung

Digitus

Digitus DN 16058 Bedienungsanleitung

Digitus

Digitus DN-16055 Bedienungsanleitung

Digitus

Digitus HD NETWORK SURVEILLANCE CAMERA Bedienungsanleitung

Digitus

Digitus DN-18600 Bedienungsanleitung

Digitus

Digitus DN-16054 Bedienungsanleitung

Digitus

Digitus DN-16036 Kurzanleitung

Digitus

Digitus DN-16085 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung