Dilog PL107N Bedienungsanleitung
Instruction Manual
Voltage Detector - PL107N
2
Instruction manual
Symbols on the instrument and in the
instruction manual:
Warning! Warns of potential danger,
comply with the instruction manuals.
Caution! Dangerous voltage.
danger of electrical shock.
Continuous double or reinforced
insulation complies to IEC 536, Class II
Symbol of conformity, confirms conformity
with relevant EU directives. The instrument
complies with the EMC Directive (89/336/EEC)
specifically standards EN 50081-1 and EN 50082-1,
as well as the Low Voltage Directive (73/23/EEC)
described in the standard EN 61010-1.
Instruction:
The contact-free voltage tester PL107N has
been developed for voltage testing on insulated
cables and conductors. For testing, no electrical
connection to UUT is required. A second
connection, e.g.to neutral or ground is not
necessary.
The voltage tester PL107N does not require
maintenance. It is equipped with protective
insulation. Power is supplied by means of two 1.5V
AAA batteries 1.5V IEC LR03.
10
12 months guarantee
The instruments are subject to stringent quality
controls. If, in the course of normal daily use, a fault
should occur, we provide 12 months guarantee
(only valid with invoice). Faults in manufacture and
materials will be rectified by us free of charge,
provided the instrument has not been tampered
with, and is returned to us unopened. Damage due
to dropping, abuse or misuse is not covered by the
guarantee.
Our Service Department will promptly repair any
faults that occur outside the guarantee period.
Please contact:
Di-Log TestEquipment
Unit 28, Wheel Forge Way, Trafford Park,
Manchester M17 IEH
Freephone: 0800 018 9112
Freefax: 0800 018 6711
www.dilog.co.uk
This Instruction Manual has been prepared with great
care. No liability is accepted for the correctness and
completeness of the data, illustrations, and drawings it
contains.
We reserve the right to make technical alterations.
3
Features:
• Contact-free voltage test 90V...1000V AC
• Display via LED (flashing) acoustic
sound signal
• Contact-free testing of AC voltages on
insulated cables and conductors
• Locating line interruptions in insulated
cables and conductors
• Phase tester of sockets
• Conventional 1.5V batteries AAA
Safety measures:
The instrument has left our factory in a safe and
perfect condition. To maintain this condition, the
user must pay attention to the safety references
contained in this instruction manual.
Warning! This instruction manual contains
both information and warnings that are
necessary for the safe operation and maintenance
of the instrument. It is recommended that you read
the manual carefullyand ensure that its contents
are fully understood. Failure to understand these
instructions and to comply with the warnings and
instructions contained herein can result in serious
injuryor damage.
Warning! Only touch the instrument handle
for anyvoltage test.
Warning! The instrument may only be used
within the operating ranges as specified in
the technical data section.
Warning! The test instrument may only be
used in properly grounded electrical
installations.
4
Warning!
Prior to usage, inspect voltage
tester for external damage. Prior to any operation,
ensure that voltage tester is in perfect condition.
Warning!
Prior to opening, the instrument
has been switched off and disconnected from any
current circuit.
Warning!
The instrument must only be used
under the conditions and for the purposes for which
it has been constructed. Particular attention should
be paid to the safety instructions, the technical
specifications relating to environmental conditions
and the use of the instrument in dry surroundings.
9
Technical data
Voltage range: 90...1000V AC
Frequency range: 50Hz...500Hz
Display: Clear, omnidirectional
flashing beacon
IP-Protection: IP40
Overvoltage category: CAT III, 600V
Pollution degree: 2
Altitude: up to 3000m
Temperature range: --10˚C up to 50˚C
Humidity: <80%
Power supply: 2 x 1,5V batt. AAA
Dimension: 150 x 25 x 20mm
Weight: Approx. 50g
8
Battery replacement
Batteries: 2 x 1.5V AAA.
Slide the two parts of the case apart by holding the
unit firmly and pressing the pocket clip forward
Warning! If the instrument is likely to remain
unused for a long period of time the
batteries must be removed. If a battery should leak
inside the housing, return the instrument to our
service department for cleaning and checking.
Please think of the environment when used
batteries. They should be disposed of in a
place suitable for hazardous waste.
Warning! Please, comply with the
appropriateregulations concerning the
return, recycling and disposal of used batteries and
accumulators.
5
Display and control elements:
1. Test probe
2. LED for voltage indication
3. Battery case cover
4. Clip
5. Switch
Danger! In order to avoid the danger of
electrical shock, it is important that proper
saftey measures are respected when working with
voltages exceeding 120V (60V) DC or 50V (25V)
r.m.s. AC. These voltages represent internationally
the limits of max. contact voltage.
Warning! The voltage tester is appropriate
for AC voltages between 90V and 1000V AC.
Aperfect instrument function is only ensured within
a temperature range of --10 up to 50˚C >45%
humidity.
1
2
5
3
4
6
Warning! The signal during the voltage test
does not provide any indication of the type
and level of voltage present. In case of doubt,
measure the voltage by using a test instrument with
display indication.
The voltage tester is delivered with installed
batteries. The voltage tester indicates voltages from
50V to 600V AC.
Operation
Always test the unit on a known source to check the
unit for correct operation.
Press the test switch the LED will light continuously.
Hold the test switch down at the same time touch
the circuit under test with the test probe tip.
When voltageis detected the LED will flash and the
buzzer sound.
Low Battery Indication
When the battery voltage drops below 2V, the LED
will not light when the test switch is pressed
Inhaltsverzeichnis
Andere Dilog Messgerät Handbücher
Dilog
Dilog DL6799 Bedienungsanleitung
Dilog
Dilog DL6702 Bedienungsanleitung
Dilog
Dilog DL6519 Bedienungsanleitung
Dilog
Dilog DL6507 Bedienungsanleitung
Dilog
Dilog DL6506 Bedienungsanleitung
Dilog
Dilog DL7206 Bedienungsanleitung
Dilog
Dilog DL6780 Combi Volt 1 Bedienungsanleitung
Dilog
Dilog DL6505 Bedienungsanleitung
Dilog
Dilog DL7040 Bedienungsanleitung
Dilog
Dilog DL7030 Bedienungsanleitung
