Directed Electronics Clifford G5 Bedienungsanleitung

The Science of Security

™

CClliiffffoorrddRReessppoonnddeerrCCoommppaanniioonnRReemmoottee

PN 472X

Compatible with the

following systems:

RRSS33

RRSS11..55

RRSS33..55

22..55XX

Note: The RS3 requires alter-

nate programming.

1. Open a door. (The GREEN wire, H1/5, or theVIOLET, H1/7

must be connected.)

2. Key. Turn the ignition on. (The heavy gauge PINK wire of

the relay satellite must be connected.)

3. Select the receiver channel. Press and release the

Valet®/Program switch the number of times necessary to

access the desired channel. Once you have selected a chan-

nel, press and HOLD the Valet®/Program switch once more.

The siren will chirp and the LED will blink the number of times

corresponding to the channel that has been accessed.

NOTE:

Alternate programming is required for RS3.Consult the

RS3 Owner’s or Installation Guide for details.

Channel No. Function

1 Auto Learn Standard Configuration (default)

2 Arm only

3 Disarm only

4 Silent Mode™/Remote Valet®/Trunk Release

5 Remote Start

6 Channel 4

7 Channel 5

8 Short Run/Turbo

9 Timer Mode

10 Arm/Disarm/Panic

11 Panic Only

12 Delete all transmitters

Channels Two, Three and Eleven: Channels Two through

Eleven are used to assign the arm, disarm and panic functions

to separate buttons on the remote control.Teaching a button to

Channel Two erases all information about that remote from

memory.Any auxiliary functions that are desired will have to be

reprogrammed.Similarly, if the remote is set up to use the sep-

arate arm, disarm and panic channels and a button from that

remote is entered into Channel Two, the remote will be erased

from memory, and the system will only recognize the button

that was entered into Channel Two.

ChannelTwelve: If any transmitter button from a known trans-

mitter is programmed to ChannelTwelve, all transmitters will be

erased from memory and will revert to the default feature set-

tings.(See Features Menu section of this guide.) This is useful

in cases when one of the customer's transmitters is lost or

stolen. This will erase any lost or stolen transmitters from the

system's memory. It can also be used to start from scratch if

the transmitter buttons were programmed incorrectly.

4. Press the transmitter button. While HOLDING the

Valet®/Program switch, press the button from the transmitter

that you wish to assign to that channel.The unit will chirp indi-

cating successful programming. It is not possible to teach a

transmitter button to the system more than once.

5. Release. Once the code is learned, the Valet®/Program

button can be released.You can advance from one channel to

another by releasing the Valet® /Program button and tapping it

to advance channels and then HOLDING it. For example, if

you want to program Channel Three after programming

Channel One, release the Valet®/Program button. Press it

twice and release it to advance to Channel Three. Then press

it once more and HOLD it. The siren will chirp three times to

confirm it is ready to receive the code from the transmitter.

Learn Routine™ will be exited if:

Ignition is turned off.

Door is closed.

Valet®/Program button is pressed too many times.

More than 15 seconds elapses between steps.

One long chirp indicates that Learn Routine™ has been exited.

This device complies with Part 15 of FCC rules.

Operation is subject to the following conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference

received, including interference that may cause

undesired operation. Changes or modifications not

expressly approved by the party responsible for

compliance could void the user's authority to

operate this device.

MADE IN TAIWAN

P/N 472X 6/03

CClliiffffoorrddRReessppoonnddeerrCCoommppaanniioonnRReemmoottee

PN 472X

To program your new transmitter:

Andere Directed Electronics Autoalarmanlage Handbücher

Directed Electronics

Directed Electronics Security System and Convenience 125xv Bedienungsanleitung

Directed Electronics

Directed Electronics PYTHON 480XP Bedienungsanleitung

Directed Electronics

Directed Electronics 690XV Bedienungsanleitung

Directed Electronics

Directed Electronics Matrix 1 Bedienungsanleitung

Directed Electronics

Directed Electronics 100 ESP Bedienungsanleitung

Directed Electronics

Directed Electronics Intelliguard 750 Bedienungsanleitung

Directed Electronics

Directed Electronics Intelliguard 850 Bedienungsanleitung

Directed Electronics

Directed Electronics 544T Bedienungsanleitung

Directed Electronics

Directed Electronics PS-7870TWE-FM Bedienungsanleitung

Directed Electronics

Directed Electronics Matrix 2 Bedienungsanleitung

Directed Electronics

Directed Electronics Avital Bedienungsanleitung

Directed Electronics

Directed Electronics 737T Bedienungsanleitung

Directed Electronics

Directed Electronics Hornet 719T Bedienungsanleitung

Directed Electronics

Directed Electronics 556U Bedienungsanleitung

Directed Electronics

Directed Electronics 4100 Bedienungsanleitung

Directed Electronics

Directed Electronics 553S Bedienungsanleitung

Directed Electronics

Directed Electronics AM1 Bedienungsanleitung

Directed Electronics

Directed Electronics AdvantGuard 5 Bedienungsanleitung

Directed Electronics

Directed Electronics 3901T Bedienungsanleitung

Directed Electronics

Directed Electronics Python 323 Bedienungsanleitung

Directed Electronics

Directed Electronics ProSecurity SR6000 Bedienungsanleitung

Directed Electronics

Directed Electronics Responder 460 Bedienungsanleitung

Directed Electronics

Directed Electronics Cyber 130XV Bedienungsanleitung

Directed Electronics

Directed Electronics 671XV Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Ultra Start

Ultra Start 450 SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Excalibur

Excalibur AL-1860-EDPB Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung