Directed 403.CHRYSLER6 v2.17 Bedienungsanleitung

DB3 403.CHRYSLER6

v2.17

2014 Dodge/Ram 3500

THCHD3, THCHD3-REV2 Compatible

(Sold Separately)

Introduction 3

Vehicle function compatibilities 4

Pre-installation and application warnings 5

Installation 6

Wiring diagram with T-Harness (THCHD3 Rev. 1 to 2) 6

Wiring diagram 7

Locating components in the vehicle 8

Vehicle connections 9

SmartStart/XL202 installation notes 11

Connecting the module 11

LED diagnostics and troubleshooting 13

Soft reset 15

Hard reset 15

Module programming 16

Feature programming 17

Feature and option list 18

Limited one year consumer warranty 19

Quick reference guide (customer copy) 20

Contents

3403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Introduction

DB3 is an all-in-one door lock and override module. This guide supports the installation of a DB3 in Range

Extender Ready (RXT) mode with an RF System or a SmartStart (both sold separately).

Warning!

This module can only be flashed and configured using DirectLink at www.directechs.com or using the Directechs

Mobile application for smartphones. Refer to “Connecting the module” for more information.

4403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Vehicle function compatibilities

This section lists all the functions compatible with this vehicle for the installation illustrated in this guide.

Note: The telematics features listed below (with an asterisk) ONLY apply when using SmartStart.

Panic Mode Activation

Parking Lights Control

Arm Factory Security

Disarm Factory Security

Door Lock Control

Door Unlock

Driver Priority Unlock

Control of aftermarket alarm with OEM remote

Fuel level/EV battery level

Key2GO

Immobilizer Bypass-Data No Key Req'd

3x LOCK START (Start control using OEM Remote)

3x LOCK STOP (Stop control using OEM Remote)

OEM Remote Start Activation using XL-202 or RF kit

RAP Shut Down (Retained ACC Power)

Remote Start Ready

Remote Start Takeover

SmartStart

Tach / RPM Output

Entry Monitoring ALL Door Pins

Entry Monitoring Hood Pin

Factory Alarm Trigger Monitoring

Brake Status (foot brake)

Door Locks Status

E-Brake Status

Ignition Status

5403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Pre-installation and application warnings

START HERE This section highlights important information for this speciﬁc ﬁrmware and will assist in pricing accordingly, as

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

compatible

THCHD3 (Rev. 1 to 2) Keys required for

programming 1Keys required

for operation 0

Vehicle Takeover Refer to the Quick Reference Guide section for more details.

Firmware notes

OEM Key FOB: The keyless entry control on the OEM Key FOB used during Key2GO programming will not work while the vehicle is

remote started.

Key2GO is mandatory to control the immobilizer override in this ﬁrmware.

Range Extender Ready (RXT) installations are only compatible with vehicles equipped with factory-installed remote starter.

Range Extender Ready (RXT) is used to dramatically increase the factory remote start activation range compared to the factory

transmitter. Refer to the Quick reference guide for more information.

T-Harness: The optional Plug & Play THCHD3 (Rev. 1 to 2) T-Harness is sold separately

The OBDII Diagnostic Connector features will remain the same even when the T-Harness is installed.

SmartStart Compatible: SmartStart is equipped with D2D, which means it can be connected to an interface module and used in

Range Extender Ready (RXT) mode without the use of a remote starter. See "Module programming" for more information.

All T-Harness wires not listed in the diagram are not required for the installation.

Unless speciﬁed otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the "Vehicle connections" following the installation diagram.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory hood pin or if

not supported in data.

6403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

Wiring diagram with T-Harness (THCHD3 Rev. 1 to 2)

1412

10 42

THCHD3 Rev. 1 to 2 (optional T-Harness)

OBDII

Diagnostic Connector

Male Female

T-01

6-pin Black Connector

T-02

6-pin White Connector

Male

Female

Not Used

Use the style of OBDll

connector that fits the best.

You can connect to

either a XL202 RFTD

OR a SmartStart

module.

Refer to the

SmartStart/XL202

Installation Notes for

more information.

The Remote Start Safety

Override Switch MUST

be in the ON position.

7403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Refer to "Pre-installation and application warnings" for important information, such as the description of each special note referenced in the diagram ( ).

1412

10 42

1 8

169

HS CAN2 High: Orange/Green: 5

HS CAN2 Low: Orange/Brown: 6

(+) 12V: Red: 13

(-) Ground: Black: 14

HS CAN Low: Tan: 4

HS CAN High: Tan/Black: 3

(-) Ground: pin 4

(+) 12V: Red, pin 16

OBDII

Diagnostic Connector

You can connect to either a

XL202 RFTD OR a SmartStart

module.

Refer to the SmartStart/XL202

Installation Notes for more

information.

Wiring diagram

CAN C High:

Gray/White, pin 6

CAN IHS Low:

White, pin 11 CAN C Low:

Yellow, pin 14

CAN IHS High:

Gray, pin 3

Fuse 7.5A

6: White/Black:

(-) Hood

Remote Start Safety

Override Switch

Hood Pin

8403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Locating components in the vehicle

9403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Vehicle connections

The connection information listed below is specific to the 2014 Dodge/Ram 3500. Refer to “Pre-installation and application warnings” for a list of important notes.

Data 14-pin blue connector (H1)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H1/1 Light Green No Connection No Connection

H1/2 Violet/Yellow No Connection No Connection

H1/3 Tan/Black (DATA) HS CAN High 1 OBD-Data Link Connector, black 16 pin plug, pin 6 Data Gray/White (CAN C)

H1/4 Tan (DATA) HS CAN Low 1 OBD-Data Link Connector, black 16 pin plug, pin 14 Data Yellow (CAN C)

H1/5 Orange/Green (DATA) HS CAN High 2 [1] OBD-Data Link Connector, black 16 pin plug, pin 3 Data Gray (CAN IHS)

H1/6 Orange/Brown (DATA) HS CAN Low 2 [1] OBD-Data Link Connector, black 16 pin plug, pin 11 Data White (CAN IHS)

H1/7 Brown Relay N.O. - No Connection No Connection

H1/8 Yellow Relay COM - No Connection No Connection

H1/9 Orange/Yellow Relay N.C. - No Connection No Connection

H1/10 Orange/Red Relay N.C. - No Connection No Connection

H1/11 Yellow/Red Relay COM - No Connection No Connection

H1/12 Brown/Red Relay N.O. - No Connection No Connection

H1/13 Red (+) 12 Volt Input OBD-Data Link Connector, black 16 pin plug, pin 16

7.5A Fuse to 12V.

+ Red (10A)

H1/14 Black (-) Ground OBD-Data Link Connector, black 16 pin plug, pin 4 - Black

Output 12-pin red connector (H2)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H2/1 Black/White No Connection No Connection

H2/2 Green/Black No Connection No Connection

H2/3 Green/White No Connection No Connection

H2/4 Red/Black No Connection No Connection

H2/5 Violet/White No Connection No Connection

H2/6 Gray No Connection No Connection

H2/7 Gray/Black No Connection No Connection

H2/8 Violet/Green No Connection No Connection

H2/9 Violet/Brown No Connection No Connection

H2/10 Yellow/Black No Connection No Connection

H2/11 Orange/Black No Connection No Connection

H2/12 Blue/Red No Connection No Connection

Input 10-pin black connector (H3)

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

10 403.CHRYSLER6 2.17 2014 Dodge/Ram 3500

Module Connects To

Conn./Pin Color Description Wire Location (+/-) Wire Color

H3/1 Green No Connection No Connection

H3/2 Blue No Connection No Connection

H3/3 Red/White No Connection No Connection

H3/4 White/Violet No Connection No Connection

H3/5 Violet/Black No Connection No Connection

H3/6 White/Black (-) Hood Input [1] The installation of an aftermarket hood pin is on

H3/7 Pink/White No Connection No Connection

H3/8 Violet No Connection No Connection

H3/9 Pink No Connection No Connection

H3/10 Blue/White No Connection No Connection

D2D 4-pin white connector (H4)

Module

Conn./Pin Color Description

H4/1 Green (Data) TX

H4/2 Black (-) Ground

H4/3 Blue (Data) RX

H4/4 Red (+) 12 Volt

RF 2-pin white connector (H5)

Module

Conn./Pin Color Description

H5/1 N/A No Connection

H5/2 N/A No Connection

Andere Handbücher für 403.CHRYSLER6 v2.17

Inhaltsverzeichnis

Andere Directed Autozubehör Handbücher

Directed

Directed DS4+ Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs HYUNDAI1 Bedienungsanleitung

Directed

Directed Directechs DS3 Bedienungsanleitung

Directed

Directed VOXX DEI DS3+ Bedienungsanleitung

Directed

Directed 403.SUBARU2 Bedienungsanleitung

Directed

Directed DIRECTECHS HONDA4 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed 535T Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed XpressKit DBALL Bedienungsanleitung

Directed

Directed 403.CHRYSLER6 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Directed

Directed DS4 Plus FORD12 Bedienungsanleitung

Directed

Directed VW10 Bedienungsanleitung

Directed

Directed DS4+ Bedienungsanleitung

Directed

Directed DS3+ Bedienungsanleitung

Directed

Directed Xpresskit DBALL2 Bedienungsanleitung

Directed

Directed DS4+ Bedienungsanleitung

Directed

Directed Directechs DB3 Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung