Dish Network Solo 301 Gebrauchsanweisung

Setting Up Your

Replacement Remote

Setting Up Your

Replacement Remote

182427

Program the Remote to Control Your TV

301 and 311 Receivers

3.4 IR Remote Control

EPress and release

the SAT mode

button.

The SAT

mode button

will light up.

Use the “Remote Control TV Codes” booklet that was included with your replacement

remote to find the code needed for your TV.

The TV

mode button

will flash

three times.

While facing the TV

where the remote

will be used, press

and hold the TV

mode button.

Press and release

the POUND (#)

button.

Press and release

the large, red

POWER button.

BEnter the three-digit

remote control code

from the “Remote

Control TV Codes”

booklet.

Press and release

the TV POWER

button. Then, press

VOLUME up or

down to confirm

that the remote

operates your TV.

The TV

mode button

will light up.

All four mode

buttons will

light up.

The TV will

turn off.

The TV will

turn on and

respond to

remote

commands.*

Congratulations! You are now ready to enjoy DISH Network.

If your TV does not respond to the DISH remote, try another three-digit remote control TV code.

Go to dish.com/support for instructions on programming your remote using Power Scan or for

setting up your remote to function in Limited and SAT Auto Tune modes.

VOL

Install the Batteries

Program the Remote to Control Your Receiver

Test Your Remote

Attach Room Identication Labels

Remove the remote battery cover and install

the enclosed batteries. Replace the battery

cover.

Attach the correct identification labels to the

battery cover.

To turn your DISH receiver on, press and release

the POWER button on the front of your receiver.

Then, turn on your TV and press and release the

GUIDE button on your DISH remote.

If the programming guide displays

on your TV, skip to Step 5. If the programming guide does not

display, continue with Step 4.

DPress and

release the

RECORD

button.

CPress and

release the

SAT mode

button on

your remote.

FGo to the TV

where the

remote will be

used. Press and

release the

GUIDE button.

The SAT mode

button will light

up again.

The SAT mode

button will light

up.

The

programming

guide will

display on the

TV.

EPress and

release the

SELECT button

to close the

System Info

screen.

The System

Info screen

will close and

programming

will display.

The TV screen

will no longer

display a

picture.

APress and

release the

POWER button

on the front of

your receiver.

The System

Info screen

will display.

BPress and

release the

DOWNARROW

button on the

front of your

receiver.

FAMILY ROOM

TUNE

TVTO

AAA

Install the Batteries

Program the Remote to Control Your Receiver

Test Your Remote

Attach Room Identication Labels

Remove the remote battery cover and install

the enclosed batteries. Replace the battery

cover.

Attach the correct identification labels to the

battery cover.

To turn your DISH receiver on, press and release

the POWER button on the front of your receiver.

Then, turn on your TV and press and release the

GUIDE button on your DISH remote.

If the programming guide displays

on your TV, skip to Step 5. If the programming guide does not

display, continue with Step 4.

DPress and

release the

RECORD

button.

CPress and

release the

SAT mode

button on

your remote.

FGo to the TV

where the

remote will be

used. Press and

release the

GUIDE button.

The SAT mode

button will light

up again.

The SAT mode

button will light

up.

The

programming

guide will

display on the

TV.

EPress and

release the

SELECT button

to close the

System Info

screen.

The System

Info screen

will close and

programming

will display.

The TV screen

will no longer

display a

picture.

APress and

release the

POWER button

on the front of

your receiver.

The System

Info screen

will display.

BPress and

release the

DOWNARROW

button on the

front of your

receiver.

FAMILY ROOM

TUNE

TVTO

AAA

Setting Up Your

Replacement Remote

Setting Up Your

Replacement Remote

182427

Program the Remote to Control Your TV

301 and 311 Receivers

3.4 IR Remote Control

EPress and release

the SAT mode

button.

The SAT

mode button

will light up.

Use the “Remote Control TV Codes” booklet that was included with your replacement

remote to find the code needed for your TV.

The TV

mode button

will flash

three times.

While facing the TV

where the remote

will be used, press

and hold the TV

mode button.

Press and release

the POUND (#)

button.

Press and release

the large, red

POWER button.

BEnter the three-digit

remote control code

from the “Remote

Control TV Codes”

booklet.

Press and release

the TV POWER

button. Then, press

VOLUME up or

down to confirm

that the remote

operates your TV.

The TV

mode button

will light up.

All four mode

buttons will

light up.

The TV will

turn off.

The TV will

turn on and

respond to

remote

commands.*

Congratulations! You are now ready to enjoy DISH Network.

If your TV does not respond to the DISH remote, try another three-digit remote control TV code.

Go to dish.com/support for instructions on programming your remote using Power Scan or for

setting up your remote to function in Limited and SAT Auto Tune modes.

VOL

Andere Handbücher für Solo 301

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dish Network Fernbedienung Handbücher

Dish Network

Dish Network 20.1 Bedienungsanleitung

Dish Network

Dish Network 54.0 Bedienungsanleitung

Dish Network

Dish Network 20.0 Bedienungsanleitung

Dish Network

Dish Network Remote Control Bedienungsanleitung

Dish Network

Dish Network 3.1 Bedienungsanleitung

Dish Network

Dish Network 311k Bedienungsanleitung

Dish Network

Dish Network 20.0 Bedienungsanleitung

Dish Network

Dish Network Platinum 121716 Bedienungsanleitung

Dish Network

Dish Network Digital PVR Bedienungsanleitung

Dish Network

Dish Network Hopper with Sling Bedienungsanleitung

Dish Network

Dish Network 135331 Bedienungsanleitung

Dish Network

Dish Network 159263 Bedienungsanleitung

Dish Network

Dish Network Duo ViP 222 Gebrauchs- und Wartungshandbuch

Dish Network

Dish Network EZ Bedienungsanleitung

Dish Network

Dish Network Duo ViP 222 Bedienungsanleitung

Dish Network

Dish Network 11 Technisches Datenblatt

Dish Network

Dish Network Platinum Remote Control Bedienungsanleitung

Dish Network

Dish Network 52.0 Bedienungsanleitung

Dish Network

Dish Network SoloDVR ViP 612 Gebrauchs- und Wartungshandbuch

Dish Network

Dish Network 54.0 Bedienungsanleitung

Dish Network

Dish Network Platinum Plus 121150 Bedienungsanleitung

Dish Network

Dish Network ViP 922 Slingloded DVR Bedienungsanleitung

Dish Network

Dish Network digital remote control Bedienungsanleitung

Dish Network

Dish Network 52.0 Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung