DK-Technologies RAP-B-138U Bedienungsanleitung

DK METER –Audio & Loudness Metering Complete

DK METER

User Manual

INTRODUCTION ...............................................................................................................................................4

BEFORE YOU BEGIN…............................................................................................................................................... 4

ABOUT THIS MANUAL............................................................................................................................................... 4

OTHER IMPORTANT NOTES ....................................................................................................................................... 5

QUICK GUIDE ...................................................................................................................................................6

IF YOU JUST WANT TO GET GOING ............................................................................................................................... 6

BASIC OPERATION ...........................................................................................................................................7

MOUNTING YOUR DK METER.................................................................................................................................... 7

POWER SUPPLY....................................................................................................................................................... 7

NAVIGATION .......................................................................................................................................................... 7

SLIDING WINDOWS AND VIEWS ................................................................................................................................. 8

MENU NAVIGATION ................................................................................................................................................ 8

THE PRESET AND QUICK SETUP ........................................................................................................................9

STEP 1- PRESET LIST ................................................................................................................................................ 9

STEP 2-INPUT AND CHANNEL ORDER ....................................................................................................................... 10

STEP 3-SCALE AND LOUDNESS SETUP....................................................................................................................... 10

STEP 4-METER TEXT READ OUT ............................................................................................................................. 11

UPGRADE OPTION TRIAL ........................................................................................................................................ 12

HOW TO ….......................................................................................................................................................... 12

BACKLIGHT AND STANDBY....................................................................................................................................... 12

METER VIEWS –AN OVERVIEW .....................................................................................................................12

PORTRAIT BARGRAPH (VIEW 1) ............................................................................................................................... 12

GRAPHICAL LOUDNESS PORTRAIT (VIEW 2)................................................................................................................ 13

HORIZONTAL GRAPHICAL LOUDNESS (VIEW 3)............................................................................................................ 13

MSD VIEW MODE (VIEW 4) ................................................................................................................................... 13

FFT MODE (VIEW 5).............................................................................................................................................. 13

HORIZONTAL BARGRAPH (VIEW 6) ........................................................................................................................... 14

METER SETUP & AUDIO ROUTING .................................................................................................................15

AUTOMATED METER SETUP .................................................................................................................................... 15

CLOCK SETUP AND HIERARCHY................................................................................................................................. 15

AUDIO ROUTING SETUP.......................................................................................................................................... 15

THE ADVANCED SETUP MENU........................................................................................................................18

THE SETUP MENU ................................................................................................................................................. 18

ABOUT –USER MODE &USER RESTRICTIONS ............................................................................................................ 18

PRESET –FOLDER.................................................................................................................................................. 19

MATRIX OUTPUT ASSIGN –SELECTING YOUR METER SOURCE........................................................................................ 19

METER SETUP ...................................................................................................................................................... 19

STARFISH™SETUP ................................................................................................................................................ 20

LOUDNESS PRESET................................................................................................................................................. 21

LOUDNESS SETUP .................................................................................................................................................. 21

LOUDNESS OPTION................................................................................................................................................ 23

LABELS ASSIGN ..................................................................................................................................................... 24

AUDIO GLOBAL..................................................................................................................................................... 24

INSTRUMENTS & DISPLAY TOOLS ..................................................................................................................25

PORTRAIT BAR-GRAPHS .......................................................................................................................................... 25

EYE WIDTH .......................................................................................................................................................... 25

AES LOCK INDICATION ........................................................................................................................................... 26

GONIOMETER –VECTORSCOPE ................................................................................................................................ 26

PHASE CORRELATION.............................................................................................................................................. 26

STARFISH™.......................................................................................................................................................... 26

JELLYFISH™.......................................................................................................................................................... 27

LOUDNESS BAR-GRAPH(S)....................................................................................................................................... 27

METER TEXT READ-OUTS ....................................................................................................................................... 27

RECLAIM FACTOR .................................................................................................................................................. 28

GRAPHICAL LOUDNESS ........................................................................................................................................... 28

FFT SPECTRUM ANALYZER ...................................................................................................................................... 28

MOVING COIL EMULATION ..................................................................................................................................... 29

DK LOGGING PC APPLICATION ................................................................................................................................ 29

HOW TO….. ....................................................................................................................................................30

HOW TO GET LANDSCAPE AND MSD VIEW ................................................................................................................. 30

HOW TO ENABLE FFT SPECTRUM ANALYZER................................................................................................................ 30

HOW TO SET ANALOG INPUT SENSITIVITY ................................................................................................................... 30

HOW TO SWITCH TO MOVING COIL EMULATION ......................................................................................................... 30

HOW TO CHANGE THE BAR-GRAPH WIDTH.................................................................................................................. 30

HOW TO CUSTOMIZE WINDOW TEXT READ OUT.......................................................................................................... 30

HOW TO SOFTWARE UPDATE ................................................................................................................................... 31

HOW TO UPGRADE YOUR METER.............................................................................................................................. 31

HOW TO CLONE THE SETTINGS FROM ONE UNIT TO ANOTHER......................................................................................... 31

HOW TO VIEW TWO STEREO PAIRS WHILE WATCHING LOUDNESS BASED ON PAIR #1........................................................... 32

LOUDNESS & TERMINOLOGY .........................................................................................................................33

ABOUT LOUDNESS................................................................................................................................................. 33

TERMINOLOGY...................................................................................................................................................... 33

OTHER RELEVANT INFO..................................................................................................................................35

THE DK METER FAMILY.......................................................................................................................................... 35

DK METER ONLINE APPLICATION (PC SOFTWARE) ...................................................................................................... 35

SIGNAL CONNECTIONS ............................................................................................................................................ 36

SPECIFICATIONS .................................................................................................................................................... 38

Introduction

Before you begin…

Thank you for purchasing one of the DK Meter family members.

With the DK Meter you are well equipped to meet the growing challenges within Audio and Loudness metering.

The DK Meter complies with all major Broadcast loudness standards and delivers outstanding

metering precision and clear read-outs, not merely on Loudness, but across the full range of audio metering

tools.

The DK Meter toolset makes it application-fit for any audio and loudness setup in broadcast, film & post

production as well as live transmission and recording.

With the clear DK Meter readout and compliance in your line of sight, you are always safe and sound.

Flexible & User definable

The DK Meter range holds a wide selection of audio measuring tools, including Loudness measurements

compliant with all major broadcast standards.

With an open and flexible approach, DK Meter leaves it up to you to decide exactly what tools, read-outs, scales

and labels you would like to use.

Your setups can be stored and recalled as user defined presets, allowing you to adapt your desired meter views

on the fly.

About this manual

This manual will provide you with a quick overview of the DK Meter operation, tools and options, as well as an

in-depth look at the more advanced parameters and facilities of DK Meter.

Happy reading!

Please note: DK-Technologies reserve the rights to change the content of this manual at any time. The latest

revision of this manual can be downloaded from:

www.DK-Technologies.com

Other Important Notes

Disclaimer

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and scanning, for any purpose, without the prior written consent of DK-

Technologies A/S. The company aims to ensure that all details in this document are correct at the time of

publication, but reserves the right to alter specifications and equipment without notice. The latest version will be

available upon request. This publication is for international usage.

Despite considerable effort to produce up to date information, no literature published by the company nor any

other material that may be provided should be regarded as an infallible guide to the specifications available nor

does it constitute an offer for sale of any particular product.

StarFish and JellyFish are registered trademarks of DK-Technologies A/S. Dolby®E is a registered trade mark of

Dolby Laboratories, Inc. The ownership of any trademarks referenced is acknowledged.

Purpose

Any fitness for purpose legislation or other determination that may be applied in the area where this equipment

is installed must take due cognisance that it is designed for use in professional broadcast, audio and video

systems by appropriately trained personnel. The equipment is not intended for use in a domestic environment

and regulations designed for such situations are not applicable.

After sales modifications

Any modifications to the equipment not specifically authorised and approved by DK-Technologies A/S may

invalidate the equipment warranty. This includes changes to cabling and variations to the recommended

installation as detailed in the documentation issued by DK-Technologies A/S. Modifications can invalidate EMC

and safety features designed into this equipment and the manufacturer cannot be liable for any legal

proceedings or problems that may arise relating to such modifications. No sales agent or other person involved in

the supply chain is permitted to authorise variations from the content of this documentation.

Important Safety Instructions

Read these instructions. Study carefully and understand all safety and operating instructions before you

install and operate the unit!

Keep these instructions. Keep all safety and operating instructions for future reference!

Heed all warnings on the unit and in the safety and operating instructions before you install and operate

the unit!

Follow all instructions to ensure against injury to yourself and damage to the unit or other objects

connected to the unit.

To prevent possible electrical shock, death, fire, injuries and malfunctions, use this product only as

specified.

Only use attachments and accessories specified by the manufacturer.

The units of the DK Meter range are designed for indoor use only

Quick guide

If you just want to get going

If you just want to get going with your new DK Meter right away, here are a few simple steps to get it up and

running.

1. Connect the included power supply or power your meter directly from your computer USB port.

2. Powering up your meter, you will see the on-board quick setup guide –if you want to disregard that,

slide across the three touch buttons from left-to-right (you can always return to the guide later).

3. Connect the DK Meter AES 1 to the appropriate audio output and play audio.

4. You will now see the default meter view in stereo or surround sound depending on your model and

options (fig xx). This view includes four main sections:

Meter Text Readouts –Integrated Loudness, Reclaim factor, Loudness Range and Peak Level

(true peak)

Digital PPM –Showing True Peak

Vectorscope/GonioMeter –Showing sum/difference content

Phase Correlation –showing phase information

For more information on the individual tools, please refer to the ‘display tools and options’ section of this manual.

Meter Text Readouts

PPM –True Peak

Phase Correlation

Vectorscope

Basic Operation

Mounting your DK Meter

The DK Meter is supplied with an adjustable mounting bracket. The top piece is

mounted onto the DK Meter with the two included screws, while the desktop

piece is mounted with four screws.

Additional fixing options and mounts are available from DK-Technolgies.com or

from RAM on http://www.rammount.com .

The included model number is: RAP-B-138U

Power Supply

The DK Meter comes with a plug-top power supply with a USB outlet. If being

used in conjunction with a computer or USB hub, any conventional USB-A outlet

with the standard USB 5 volt supply may be used instead of the included power

supply unit.

This elegant feature not only makes the DK Meter easier to bring along, but also

conveniently allows the DK Meter to power up with the relevant computer of your

setup.

Navigation

The general navigation on the DK Meter is achieved through the three capacitive touch sensitive buttons below

the screen.

Each touch button corresponds to the on-screen button and dynamically changes name as relevant.

In addition, swiping across the three buttons from left-to-right or vice versa, allows you to change the overall

meter view or selected menu.

Note: When fixing the mounting plate to the rear of the meter, use only

the screws supplied –damage may be caused by using longer screws, or

different mounting back plate.

PPM

+Loudness

History

PPM +

Vector-

scope

Advanced

Setup

Sliding Windows and Views

The sliding function described above allows you to easily move from one meter setup to another, as well as

entering the background Quick setup, preset and Setup menus. Here is a quick overview of the immediate

windows that you can slide between:

In every DK Meter there are four basic meter views in addition to ‘Preset and Quick Setup’ Menu and the

‘Advanced Setup Menu’. The three meter views are; PPM+Vectorscope, PPM Loudness history and Horizontal

Loudness history and Horizontal Bargraph. Additionally, the DK4 meter features another two landscape views

which may be obtained for DK1, DK2 and DK3 as software upgrades i.e. the ‘MSD Landscape Views’ and the FFT

analyzer.

See more details about the individual meter views in the Meter View Section of this manual.

Menu Navigation

When inside a menu (Quick setup or Advanced setup), the three touch buttons become your navigation. The left

most button moves the cursor up, the center button moves the cursor down and the right most button becomes

a ‘select’ function.

At any point is it possible to ‘slide’ across the buttons to exit the current menu.

In several of the menus, a folder structure has been designed to hold the many parameters and functions of the

DK Meter.

To open or close a folder, move the cursor on top of the folder and press ‘select’. You are now exposed to the

folders inside, including potential sub-folders.

Tip: Selecting an empty line and hitting ‘Select’ will close the current folder.

FFT

(Optional)

MSD View

(Optional)

PPM +

Loudness

Quick

Setup

Horizontal

Bargraph

The Preset and Quick Setup

When powering up your meter for the first time, the ‘Preset and Quick Setup’ menu will be shown as the first

display.

The Preset and Quick Setup menu, allows for a simplified and fast way of setting up you DK Meter. More

advanced settings and functions are edited in the ‘Setup’ menu reached by sliding from right to left.

The Quick Start Guide will give you a few basic tips on operation and setting up your meter.

Let’s walk through the different folders:

Here are the four simple steps to follow to set your

meter up in a few minutes:

Step 1 Preset List –Select the preset you

want to work with

Step 2 Input and Channel Order –Select

your preferred input and choose your

desired Loudness bar-graph

Step 3 Scale and Loudness Setup –Select

your Scale and Loudness setup of choice

Step 4 Meter Text Read Out –Define what

four parameters you want to see on the Meter

Text Read Out.

Step 1- Preset List

The DK Meter holds a list of presets that allows you a fast starting point,

as well as showcasing some of the different tools included in the Meter.

Any of the presets can be edited to become a custom user preset.

Selecting a preset is as easy as moving the cursor to the desired preset on the list and hitting the ‘Select’ button.

DK Meter always has a preset selected and changes are instantly stored upon exiting to the Meter view, be it;

meter setup, background parameters and display appearance.

Dynamic preset naming

When advancing in the Quick Setup, the selected preset name will dynamically reflect your choices.

The dynamic preset name includes the following information:

Input Source –channel count and Order –Loudness Setup - Scale

Note: The power-up showing of the Quick Start Guide may be disabled by unchecking the ‘Show this panel

on power up’ parameter (the change is stored upon exiting to the meter viewings).

Dynamic Preset Example

The naming of a preset may be customized in the ‘Advanced Setup Menu’ under the Audio Global/Preset Folder

(see more in the ‘Setup Menu’ section).

Step 2 - Input and Channel Order

The Input and Channel Order section allows you to easily select both your

preferred input source and the order of the incoming channels.

The list of input and channel order only displays inputs and channel setups

allowed by the current meters specific hardware and software configuration.

More advanced input and channel routings may be accessed in the Advanced Setup Menu.

The following inputs may appear depending on your specific Meters ability and interfaces:

Analogue

Digital

De-embed

All interfaces may be selected as 2.0, while only Digital and De-Embedded allows for 5.1 setups.

5.1 setups allow for two different channel orders:

LRC –corresponding to the EBU channel order: Left, Right, Center, LFE, Ls, Rs

LCR –corresponding to the SMTPE channel order: Left, Center, Right, Ls, Rs, LFE

Choosing ‘User Def’ will make the meter fall back on the settings of the more advanced ‘Setup’ menu, allowing

you to tailor input source and channel order in more advanced ways than those offered in the Quick Setup.

Step 3 - Scale and Loudness Setup

This menu allows you to define exactly what scale and specs your bar graphs

should perform to.

Select the desired scale by moving the cursor in place and hit ‘Select’.

The scale list includes:

IEC 268 I

BBC –IEC 268 II

IIB –IEC 268 II

DIN

SMPTE VU

FBTV –DIN

NBC –Ultra VU

LEQM –RMS LEQ

ITU –RMS LEQ

DMU1 –DMU1630

DMU2 –DMU1630

40A –Dorrough

40C –Dorrough

EBU –IEC 268-18

Web Peak

PPM4 –Loud 10

Any scale will be applied to the chosen Meter view.

However, one scale stands out and

Digital Input

5.1 Surround

LCR channel

order

Integrated

Loudness

Bar-graph

R128 Loudness

Setup

LEQM Meter scale

Inhaltsverzeichnis

Andere DK-Technologies Messgerät Handbücher

DK-Technologies

DK-Technologies DK T7 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung