DKN CT PRO Bedienungsanleitung
1
CT PRO
WEBSITE MANUAL
OWNER’S MANUAL
2
CURVED TREADMILL
3
WARNING
Read all instruction carefully before use this product. Retain this owner’s manual for the future’s
reference:
----When you are running, keep your hand swinging natural, stare frontward,
never look down at your feet.
----Add the speed step by step when running.
----Leave the treadmill after the running belt stop stably.
Caution: Read the assembly instruction carefully ,follow the instruction when
assemble.
ATTENTION
1. Before starting any exercise program, consult with your physician or health professional.
2. Check all the bolts locked.
3. Never put the treadmill in the wetness area, or it will cause troubles.
4. We take no responsibility for any troubles or hurts due to above reasons.
5. Dress sport clothes and shoes before running.
6. Do not do exercise in 40 minutes after meal.
7. To prevent hurts, please warm up before exercise.
8. Consult with doctor before exercise if you have high blood pressure.
9. The treadmill is only used for adults.
10. Provide the olds, children and handicapped with good care, guide and supervision.
11. Do not plug anything into any parts of this equipment, or it may damage.
12. Do not connect line to the middle of cable; do not lengthen cable or change the cable plug; do not put
any heavy thing on cable or put the cable near the heat source; forbid using socket with several holes,
these may cause fire or people may be hurt by the power.
13. Cut off the power when the equipment is not used. When the power is cut off , do not pull the power
line to keep the wire unbroken.
14. Maximum weight of user: 180KGS.
15. Pulse monitor data may not be accurate, can’t be used for medicine. Over-exercise may cause injury,
even death. If you have a feeling of dizziness, sickness or other abnormal symptoms, please stop
training and consult a doctor immediately.
4
IMPORTANT SAFETY PRECAUSTION
1. Plug the power cord of the treadmill directly into a dedicated grounded circuit. This product must be
grounded. If it has breakdown, grounding provides a path of least resistance for electric current to
reduce the risk of electric shock.
2. Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may
interfere with proper ventilation. Do not place the treadmill near water or outdoors.
3. Position treadmill so that the wall plug is visible and accessible.
4. Never start the treadmill while you are standing on the walking belt. After turning the power on and
adjusting the speed control, there may be a pause before the walking belt begins to move, always stand
on the foot rails on the sides of the frame until the belt is moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long, loose fitting clothing
that may be caught in the treadmill. Always wear running or aerobic shoes with rubber soles.
6. Make sure the power supply is connected and the safety lock is effective before using the treadmill. Fit
one side of the safety lock on the treadmill and clip the other side on your clothes or belt, which will
enable you to pull off the safety lock promptly in an emergency.
7. Always unplug the power cord before remove the treadmill motor cover.
8. Make sure there is no less than 2*1m space behind the treadmill.
9. Keep small children away from the treadmill during operation.
10. Always hold the handrails when initially walking or running on the treadmill, until you are comfortable
with the use of the treadmill.
11. Always attach the safety pull pin rope to your clothing when using the treadmill. If the treadmill should
suddenly increase in speed due to an electronics failure or the speed being inadvertently increased, the
treadmill will come to a sudden stop when the pull pin is disengaged from the console.
12. In case of any abnormality during the use process, please remove the safety lock immediately,
grasping the handlebar and jumping onto the two edgings, then get off the treadmill after it stops.
13. When the treadmill is not being used, the power cord should be unplugged and the safety pull pin
removed.
14. Put the safety key away where can’t be reached by the children. Minors must be accompanied by the
adults when using the treadmill.
15. Before starting any exercise program, consult with your physician or health professional. He or she
can help establish the exercise frequency, intensity (target heart zone) and time appropriate for your
particular age and condition. If you have any pain or tightness in your chest, an irregular heartbeat,
shortness of breath, feel faint or have any discomfort while you exercise, STOP! Consult your physician
before continuing.
16. If you observe any damage or wear on the mains plug or on any section of the mains lead then
please have these replaced immediately by a qualified electrician – do not attempt to change or repair
these yourself.
17. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
18. Put your feet on the side rail before using the treadmill, and always attach the safety pull pin rope to
your clothing. Hold the handle bar before the running belt moving well (feel the running speed by your
single foot before using it). To avoid loss balance, please slow down the speed to the lowest or take off
the safety. And hold the handle bar to jump to the side rail when emergency or the safety key is not
attached.
19. Make sure the treadmill has stopped before folding. Please don’t operate it after folding the treadmill.
5
WARNING! Consult your physician before starting with any exercise program. He can advise on
the kind of training and which impact is suitable.
WARNING! This machine is not suitable for therapeutic or medical purpose.
WARNING! Over exercising may result in serious injury or death. If you experience dizziness,
nausea, chest pain, or any other abnormal symptoms STOP EXERCISING IMMEDIATELY AND
CONSULT A PHYSICIAN WITHOUT DELAY.
WARNING! Inappropriate use of this machine such as while under the influence of drugs or alco-
hol, not in line with instructions or excessive usage, may result serious injury or death.
WARNING! Incorrect/excessive training may cause health injuries.
►The owner’s manual is only for customers’ reference.
►The supplier cannot guarantee for mistakes occurring due to translation or change in
technical specification of the product.
►DKN-Technology ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR
PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT
6
ASSEMBLY STEPS
ASSEMBLY STEP ONE:
1. Take the main frame(10) from the wooden pallet, then put the main frame(10) on the
ground, as the picture shown.
ASSEMBLY STEP TWO
1. Insert the limited board A which are on the upright tubes (12 L/R) into the hole B in the
main frame (10),then lock the upright tube (12L/R) in the main frame (10) with Cross pan
head screw (22) and Inner serrated washer (23), Notes: do not tighten the Cross pan head
screw (22).
2. Connect the sensor wire (33) and sensor extension wire (34).
3. Follow the instruction of P1, take the tension extension wire (37) go around plate C which
is in the main frame(10), and insert into stay rod D.
7
ASSEMBLY STEP THREE
1. Connect the extention2 (35) and extension wire3 (36).
2. Insert the Front handrail(14) into the computer frame(13L/R), tightened with Cross pan
head screw (22), spring washer(30), and flat washer(31).
3. Lock the Front decor cover (15L/R) tightly in the handrail(13L/R) with Cross screw(39).
8
ASSEMBLY STEP FOUR
1.Connect the sensor extention1 (34) and sensor extension wire2(35), then follow the P2
instruction, connect the tension extension wire (37) and the tension wire (38);
2. lock the computer frame(13L/R) tightly on the upright tube (12L/R) with Cross pan head
screw (22) and Inner serrated washer (23).
3. tighten all the loosen screws.
9
ASSEMBLY STEP FIVE
1. Cocking the Left support cover-outside (16) and Left support cover-inside (17) on the left
upright tube (12L), tighten with cross pan head screw (28);
2. Cocking the right support cover-outside (18) and right support cover-inside (19) on the
right upright tube (12R), tighten with cross pan head screw (28);
ASSEMBLY STEP SIX
Insert the Rear edging fix (9L/R) into the hole G which in the Front edging fix (8L/R), then
lock the Front edging fix (8L/R) and Rear edging fix (9L/R) on the main frame (10) with
Cross screw (25)
10
ASSEMBLY STEP SEVEN
1. Insert the silencer foam left 1 (40)and silencer foam left 2 (41) in the main frame (10)
separately, like the P3 shown.
2. Insert the silencer foam right (42) in the main frame (10) like the P4 shown.
3. Insert the left rear side cover (2L) into the hole H on the left Front side cover (1L), then
lock them tightly respectively in left Front edging fix (8L) and left rear edging fix (9L) with
Cross tapping screw (26); lastly fasten the left rear side cover (2L) and left Front side cover
(1L) on the main frame (10) with Hex socket screw (24).
4. Use the same way to fix the right side.
Inhaltsverzeichnis
Andere DKN Tretmühle Handbücher
Beliebte Tretmühle Handbücher anderer Marken
Smooth Fitness
Smooth Fitness EVO 3i Bedienungsanleitung
NordicTrack
NordicTrack NETL81810.0 Bedienungsanleitung
Schwinn
Schwinn 830/Journey 8.0 Bedienungsanleitung
Keys Fitness
Keys Fitness HealthTrainer HT-740T Bedienungsanleitung
Spirit
Spirit XT8 Bedienungsanleitung
NordicTrack
NordicTrack T 14.0 Treadmill Bedienungsanleitung