DMP Electronics 1168 Installationsanleitung

INSTALLATION AND PROGRAMMING GUIDE

1168 Wireless Smoke/CO/Low

Temp Detector

TABLE OF CONTENTS

About the 1168 ............................... 1

Indicator LEDs................................................. 1

Power Supply .................................................. 1

Voice Annunciation....................................... 1

Tamper Magnet............................................... 1

Cadence Synchronization ......................... 1

Low Temp Sensor .......................................... 1

1168 Features..................................2

Program the 1168 ...........................3

Select A Location ........................ 10

Install the 1168 .............................. 11

Mount the Base...............................................11

Install the Battery ......................................... 12

Replace the Cover ....................................... 12

Mounting Guidelines ....................13

Authority Having Jurisdiction..................14

Locations to Avoid ....................................... 15

Commercial .................................................... 16

Multi-Family .................................................... 16

Test the 1168 ..................................17

Smoke Test ...................................................... 17

CO Test.............................................................. 17

Additional Information ................21

Reset the Language Selection................. 21

Supervision Message................................... 21

Inspection Testing and Maintenance..... 21

Replace The Batteries.................................22

NFPA 72 Guidelines .....................................23

Compliance Speciﬁcations ........28

FCC Information ..........................30

Industry Canada Information......31

1168 Wireless Smoke/CO/Low Temp Combo Detector Installation and Programming Guide 1

ABOUT THE 1168

The 1168 Wireless Smoke/CO/Low Temp Detector features multi-criteria smoke sensing

using a combination of photoelectric, heat, IR ﬂame ﬂicker, and carbon monoxide

indicators. The 1168 reports ﬁre, CO, and low temp alarms to the control panel. Use the

onboard wireless transmitter to connect the 1168 with DMP1100Series Wireless Receivers.

INDICATOR LEDS

The 1168 has a multi-color top LED that

indicates the state of the device:

• GREEN—Supervisory indication; blinks

during power on, reset, and during

normal operation

• AMBER—Signal maintenance and

trouble events

• RED—Alarm (Smoke/CO/Low Temp)

Indicator lights on the side alarms (initiating

detector only):

• RED—Smoke

• BLUE—CO

POWER SUPPLY

The 1168 is powered by four 3.0V lithium

batteries. Battery life expectancy for the

unit is at least three years under normal

conditions.

VOICE ANNUNCIATION

The 1168 audibly announces alarm and

maintenance requirements, enhancing

occupant understanding and evacuation.

TAMPER MAGNET

The 1168 features a tamper magnet which

sends a trouble message to the panel if the

detector is removed from the mounting

base.

CADENCE SYNCHRONIZATION

The 1168 provides cadence synchronization

with other 1168 or 1164 units on the system.

LOW TEMP SENSOR

The 1168 includes a low temperature

sensor that causes an alarm when inside

temperature falls below 41°F (5°C).

1168 Wireless Smoke/CO/Low Temp Detector Installation and Programming Guide2

1168 FEATURES

Figure 1: 1168 Features

CO Test Button Smoke Test Button

Indicator

LED

IR Flame

Detector

Indicator

Lights

CO Entry

Port

Indicator

Lights

1168 Wireless Smoke/CO/Low Temp Combo Detector Installation and Programming Guide 3

PROGRAM THE 1168

When programming an 1168 Wireless Smoke/CO/Low Temp Detector, refer to the

appropriate panel programming guide as needed.

PROGRAMMER MENU

Enter 6653 (PROG) at the keypad to enter the PROGRAMMER

menu.

ZONE INFORMATION

Press CMD until ZONE INFORMATION displays. Press a select

key or area to enter the menu.

ZONE NUMBER

Enter the zone number. Press CMD.

Note: The 1168 takes up to three zone numbers (Smoke,

CO, Temp). The zone numbers must be consecutive.

ZONE NAME

Denote the zone name as a ﬁre zone. Press CMD.

ZONE TYPE

Press any select area. Press CMD to move to the next set of

menu options. Select FI (ﬁre) as the ZONE TYPE.

PROGRAMMER

ZONE INFORMATION

ZONE NO:

* UNUSED *

ZONE TYPE

FI PN EM SV

1168 Wireless Smoke/CO/Low Temp Detector Installation and Programming Guide4

FIRE BELL OUT

Default is 0. Press CMD.

NEXT ZONE

At the NEXT ZONE? prompt, select NO.

WIRELESS

At the WIRELESS? prompt, select YES.

Note: If you are programming the 1168 onto a zone that

can be either hardwired or wireless, then this prompt

appears. If the zone you are programming is wireless-only,

then the prompt does not appear.

SERIAL NUMBER

Enter the eight-digit SERIAL #: - found on the device and press

CMD.

CONTACT TYPE

Enter the CONTACT type as FIRE and press CMD.

FIRE BEL OUT: 0

NEXT ZONE? NO YES

WIRELESS? YES

TRANSMITTER

SERIAL #: -

CONTACT: FIRE

1168 Wireless Smoke/CO/Low Temp Combo Detector Installation and Programming Guide 5

SUPERVISION TIME

Enter the SUPVSN TIME, and press CMD.

NEXT ZONE

At the NEXT ZONE? prompt, select YES.

ZONE NUMBER

Enter the zone number. This number must be consecutive

with the previous zone. For example, if 500 was entered for

Fire,501 should be entered here. Press CMD.

ZONE NAME

Denote the zone name as a carbon monoxide (CO) zone. Press

CMD.

ZONE TYPE

Press any select area. Press CMD three times to move to the

last set of menu options. Select CO (carbon monoxide) as the

ZONE TYPE.

FIRE BELL OUT

Default is 0. Press CMD.

SUPVSN TIME: 240

NEXT ZN? YES

ZONE NO:

* UNUSED *

ZONE TYPE

CO IN

FIRE BEL OUT: 0

1168 Wireless Smoke/CO/Low Temp Detector Installation and Programming Guide6

NEXT ZONE

At the NEXT ZONE? prompt, select NO.

WIRELESS

At the WIRELESS? prompt, select YES.

Note: If you are programming the 1168 onto a zone that

can be either hardwired or wireless, then this prompt

appears. If the zone you are programming is wireless-only,

then the prompt does not appear.

SERIAL NUMBER

Enter the eight-digit SERIAL #: - found on the device and press

CMD.

CONTACT TYPE

Enter the CONTACT type as CO and press CMD.

SUPERVISION TIME

Enter the SUPVSN TIME, and press CMD.

NEXT ZONE? NO YES

WIRELESS? YES

TRANSMITTER

SERIAL #: -

CONTACT: CO

SUPVSN TIME: 240

Andere Handbücher für 1168

Inhaltsverzeichnis

Andere DMP Electronics Sicherheitssensor Handbücher

DMP Electronics

DMP Electronics XTLplusINT Series Installationsanleitung

DMP Electronics

DMP Electronics 1124 Bedienungsanleitung

DMP Electronics

DMP Electronics 1128 Bedienungsanleitung

DMP Electronics

DMP Electronics 1128INT Bedienungsanleitung

DMP Electronics

DMP Electronics 1122INT Bedienungsanleitung

DMP Electronics

DMP Electronics 1126R Bedienungsanleitung

DMP Electronics

DMP Electronics 1129 WIRELESS GLASSBREAK DETECTOR Bedienungsanleitung

DMP Electronics

DMP Electronics 1127W-WINT Montageanleitung

DMP Electronics

DMP Electronics 1184 Bedienungsanleitung

DMP Electronics

DMP Electronics 1121-WINT PIR Montageanleitung

DMP Electronics

DMP Electronics DEL AOP PRO 50 Bedienungsanleitung

DMP Electronics

DMP Electronics 1121 Montageanleitung

DMP Electronics

DMP Electronics 1161 Bedienungsanleitung

DMP Electronics

DMP Electronics 1127C Bedienungsanleitung

DMP Electronics

DMP Electronics XTLtouch International Series Bedienungsanleitung

DMP Electronics

DMP Electronics 1125 Montageanleitung

DMP Electronics

DMP Electronics XR Series Bedienungsanleitung

DMP Electronics

DMP Electronics 1126 Series Montageanleitung

DMP Electronics

DMP Electronics SR3 Bedienungsanleitung

DMP Electronics

DMP Electronics 1127W Bedienungsanleitung

DMP Electronics

DMP Electronics 1125 Montageanleitung

DMP Electronics

DMP Electronics 1135INT Series Bedienungsanleitung

DMP Electronics

DMP Electronics XT30INT Bedienungsanleitung

DMP Electronics

DMP Electronics 1183 Series Bedienungsanleitung

Beliebte Sicherheitssensor Handbücher anderer Marken

THORLABS

THORLABS PDA10JT Bedienungsanleitung

Waeco

Waeco UV-DETECT Bedienungsanleitung

Intermatic

Intermatic IOS-DSIMF Bedienungsanleitung

urmet domus

urmet domus 1083 Bedienungsanleitung

Siemens

Siemens AZL66 Series Bedienungsanleitung

BTI

BTI Profiline Multi Finder Bedienungsanleitung

Challenger

Challenger SL01 Bedienungsanleitung

Rielta

Rielta Ladoga MK-RK Bedienungsanleitung

Mirion Technologies

Mirion Technologies ACCURAD PRD Bedienungsanleitung

Bosch

Bosch DS835 Bedienungsanleitung

DBI SALA

DBI SALA EZ Stop Bedienerhandbuch

Lamptime

Lamptime ST05C Bedienungsanleitung

Ubiquiti

Ubiquiti MFI-MSC Bedienungsanleitung

Subsite

Subsite 910R Montageanleitung

Satel

Satel OPAL Pro Bedienungsanleitung

Aleph

Aleph XC-1XTEU Bedienungsanleitung

Pima

Pima LARIS QUAD Bedienungsanleitung

Solinst

Solinst 301 Bedienungsanleitung