DNP CX-D80 Bedienungsanleitung
Card Printer
CX-D80 Electronic
Manual
Thank you for purchasing this product.
Please read through this “Electronic Manual”
carefully in advance to ensure proper use of the
product. Also, to make sure that the product is
used safely, please read through the “Safety
Precautions” in the “READ ME FIRST” booklet.
Please store the manuals properly after reading
so that they can be referred to whenever
necessary. LST1008-002B
Contents
Before Use
About this Manual ................................................................ 3
Precautions .......................................................................... 3
Disclaimer ............................................................................ 7
Name and Functions of Parts .............................................. 7
Specifications ..................................................................... 10
Accessories/Products Sold Separately .............................. 10
Options .............................................................................. 11
Operating the Printer
Printing a Card ................................................................... 12
Operation Panel ................................................................. 13
Setting Mode ...................................................................... 15
Sequence of Setting Modes ........................................... 17
Factory Settings ............................................................. 19
Security Lock ..................................................................... 20
Setting Using the Operation Panel .................................... 22
Setting Using the Status Monitor ....................................... 30
Replacement
Cards ................................................................................. 31
Ink Ribbon .......................................................................... 32
Retransfer Film .................................................................. 33
Maintenance
Servicing of Parts ............................................................... 35
Servicing Based on Print Output ........................................ 43
Troubleshooting
When an Error Message is Displayed ............................... 44
Cards ................................................................................. 46
Ink Ribbon .......................................................................... 54
Retransfer Film .................................................................. 56
Unable to Produce Desired Printing Results ..................... 57
Printer not Operating as Desired ....................................... 58
Before Sending Printer for Repair ...................................... 58
Setup
Installation and Connection ............................................... 59
Printing Media .................................................................... 60
Printer and Computer Connection ..................................... 64
Computer Settings ............................................................. 65
Software ......................................................................... 65
Install .............................................................................. 65
Uninstall ......................................................................... 80
IPSec .............................................................................. 84
Printer Driver Settings .................................................... 87
Port Monitor Settings .................................................... 106
Status Monitor Settings ................................................ 107
Inline Encoding ............................................................. 118
List of Error Codes ....................................................... 120
Frequently Asked Questions ........................................ 123
2
About this Manual
Contents of this Manual
vThe copyright of this manual belongs to our company. Reprint and
duplicate of this manual in part or full without the prior consent of our
company is strictly prohibited.
vProduct names of other companies described in the manual are the
trademarks or registered trademarks of the respective companies.
Symbols such as ™, W and Q are omitted in this manual.
vDesigns, specifications, or other details described in this manual
may be modified for improvement without prior notice.
vMicrosoft and Windows are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or
other countries. MicrosoftW WindowsW 7 operating system,
MicrosoftW Windows Vista™ operating system, MicrosoftW
WindowsW XP operating system and MicrosoftW WindowsW 2000
operating system are represented as Windows 7, Windows Vista,
Windows XP and Windows 2000 respectively in this manual.
vMicrosoft product screen shot(s) reprinted with permission from
Microsoft Corporation.
vThis product includes software developed by the OpenSSL Project
for use in the OpenSSL Toolkit. (http://www.openssl.org/)
This product includes cryptographic software written by Eric Young
This product includes software written by Tim Hudson
How to Read this Manual
.
vInformation in this frame is for reference purposes, such as
information on functions and usage restrictions.
.
vPrecautions are described in this frame.
.
vClick this frame to display the details page.
.
vClick this icon to return to the top page.
.
Batch Print
vClick this icon to open the PDF files for all items.
The “Adobe Reader” application is needed to browse the PDF file.
.
Print
vClick this icon to open the PDF file for the displayed item.
The “Adobe Reader” application is needed to browse the PDF file.
Precautions
Safety Precautions
vPlease read through all the following items before using the
printer.
Graphical Symbols
vA number of graphical symbols are used in this manual as well as on
the printer. They are intended to ensure the safe use of this product,
protect users against safety hazards, as well as prevent damage of
property. Make sure that you read through this manual after gaining
a proper understanding of the symbols’ meaning.
.
Before Use
3
Warnings
.
.
.
Before Use
4
Caution
.
.
Before Use
5
Precautions During Use
v
Please read through all the following items before using the printer.
Printer Installation
vWhen the printer is not in use, it is recommended that you turn off
the power, and use a cover that is large enough to cover up the
entire printer unit.
vDo not place the printer unit in the following locations. Doing so may
have adverse effects on the printer.
vCarpeted room.
vPlaces with a busy flow of people.
vPlaces where paper (corrugated boards, etc.) is handled or stored.
vPlaces near photocopiers.
vPlaces exposed to direct sunlight or near a heating equipment
(such as a stove).
vInclined or unstable surfaces.
vPlaces exposed directly to cold air, such as near an air-conditioner
outlet, or places subject to high temperatures.
vWhen installing the printer, ensure there is sufficient space around
the printer. (Install the printer by allowing a clearance of at least 20
cm between its sides and surrounding walls. Allow a clearance of at
least 10 cm between the rear of the printer and the wall.)
v
When installing or moving the printer, hold the bottom (handle) of the printer
with one hand on each side to avoid jamming your hands or fingers.
mCanceling the transport mode
vWhile in the transport mode during installation, the retransfer film
cannot be loaded. If the printer is turned on without loading the
retransfer film, a [Film Search] message appears and the transport
mode is canceled.
mDuring transport or moving of the printer
vMake sure to set to the transport mode.
"Transport Mode Setting" (A page 29)
Precautions on Retransfer Film/Ink Ribbon/Card
mHandling instructions
Pay careful attention of the following when handling a printing media
(retransfer film or ink ribbon) or card.
vUsing a deformed or scratched card may cause card feed errors.
vTouching the printing surface of the printing media or card directly
with your hand may cause the print to turn out uneven.
v
Foreign particles attached to the printed areas may result in printing
voids. Install the printing media or card in a clean environment.
vUse of electrically-charged printing media or cards may cause
printing errors. Do not allow static to occur, such as due to cards
rubbing against each other.
v
When replacing or replenishing a printing media or card that is stored
under a low temperature, use after leaving the media or card in the
operating ambient temperature of the printer for at least one hour.
Otherwise, condensation may occur, causing printing errors or
malfunction of the printer.
mStorage instructions
vThe storage conditions of the printing media (retransfer film or ink
ribbon) and card have a significant effect on the printing quality.
Store the printing media or card in one of the following locations.
mStorage environment
vTemperature: 5 °C to 25 °C
vRelative humidity: 40 % to 60 %
mStorage location
Do not store the printing media or card in the following locations.
Doing so may cause the media or card to deteriorate.
vPlaces exposed to direct sunlight.
vPlaces with a high temperature and humidity.
vPlaces near organic solvents or diazo copiers.
mStorage period
vUse the printing media (retransfer film or ink ribbon) within one
year after purchase. For details on the cards, please consult our
authorized dealers.
Precautions on Retransfer Film/Ink Ribbon
vPut on the supplied gloves when handling the retransfer film/ink
ribbon. Direct contact of your hand with the printing surface may
result in printing errors.
mWhen retransfer film/ink ribbon is dismantled
vWinding misalignment may occur. If an improperly wound
retransfer film/ink ribbon is loaded, printing failure or error may
occur.
mWhen loading the retransfer film/ink ribbon
vUse your hands to adjust the media at the supply and take-up
sides so that they are parallel to each other.
When doing so, make sure you do not touch the printing surface.
vRefer to the label adhered to the cassette for alignment of the
image position. Printing errors may occur if the position is not
properly aligned.
.
Precautions on Cards
vPut on the supplied gloves when handling the cards. Direct contact
of your hand with the printing surface of the card may result in
printing errors.
mHandling and storage of cards after printing
Avoid storing cards at places that are exposed to direct sunlight or
subject to high temperature and humidity.
Discoloration or fading may occur if a card comes into contact with
the following chemicals or stationery.
vOrganic solvents, including alcohol, film cleaner, and diazo copies.
vFiles, document cases, pass holders, or erasers made of flexible
polyvinyl chloride.
vHair wax or cosmetic products.
mCard types
Thin cards and certain card materials may not be suitable for printing
using this printer. For details on the card material to use and other
specifications, please consult our authorized dealers in advance.
Cautions:
vIf the card thickness is not properly adjusted, printing error or
printer malfunction may occur.
"Adjusting card thickness" (A page 63)
mWhen a card is jammed inside the printer
Cards may not be discharged correctly such as when the retransfer
setting for the card is inappropriate.
Stop using and remove the jammed cards immediately. Otherwise,
you may have problems removing the cards, and fire or electric
shock may also occur as a result.
vWhen a card is jammed, remove it according to the procedure
described in the Electronic Manual.
vIf the card cannot be removed, do not try to do so forcibly. Consult
our authorized dealers or the servicing personnel.
Before Use
6
Disclaimer
.
Name and Functions of Parts
Internal Mechanism Diagram
.
A Card feeder unit
vThis is the roller for feeding cards.
B Bend remedy unit (optional)
vCorrects bending of the card after retransfer.
C Retransfer heating roller
vTransfers images printed on the retransfer film to the card.
D Non-contact IC encoder (optional)
vWrites data to a non-contact IC card.
E Contact section of contact IC encoder (optional)
vWrites data to a contact IC card.
F Magnetic encoder (optional)
vWrites data to a magnetic stripe card.
G Card turn over unit (double-sided printer only)
vInverts the card.
H Cleaning roller
vRemoves dust or dirt attached to the card.
I Card hopper
vFor loading cards.
J Retransfer film (take-up side)
vFor attaching the take-up side of the retransfer film.
K Retransfer film (supply side)
vFor attaching the unused side of the retransfer film.
L Ink ribbon (take-up side)
vFor attaching the take-up side of the ink ribbon.
M Thermal head
vPrints images on the retransfer film.
N Ink ribbon (supply side)
vFor attaching the unused side of the ink ribbon.
O NG card outlet
vDischarges NG cards, such as during card jams.
P Card load roller
vRoller for loading cards.
Before Use
7
Front
.
A Sliding knob
vOpens/closes the printer door.
vSlide it upward, and pull toward you to open the printer door.
B Operation buttons
vFor selecting and confirming information on the operation panel.
C Operation panel
vDisplays the settings, operating status, and error messages.
D Card hopper
vFor loading cards.
E Printer door
F Power switch
vTurns the power On/Off.
Rear
.
A USB cable connection terminal
vFor connecting a USB 2.0 interface cable.
B LAN cable connection terminal
vFor connecting a LAN cable.
C Cable clamp
vFor securing the supplied USB cable.
"Connection" (A page 64)
D AC inlet
vFor connecting the power cord.
Right
.
A NG card outlet
vIf a card is left inside the printer when the power is turned on or
reset, the card will be automatically discharged.
vCards in the printer are discharged when an error occurs in the
magnetic stripe card or IC card.
B Air suction fan opening
vAir inlet of the internal cooling fan.
C Handle
vHold this area when moving the printer.
D Filter cover
vCover of the fan filter.
E Security slot
vAn anti-theft device that supports Kensington locks can be
installed.
Left
.
A Card outlet
vOutlet for discharging the cards.
B Card stacker (supplied) attachment slot
vFor installing the supplied card stacker.
C Infrared window
vSends or receives data via infrared communication by connecting
with an external unit.
D Handle
vHold this area when moving the printer.
Before Use
8
When Printer Door is Open
.
A Card feed roller shaft
vWhen a card jam occurs, attach a jog dial to turn the card feed
roller.
B Card turn over unit shaft
vWhen a card jam occurs, attach a jog dial to turn the card turn
over unit.
C Cleaning unit
vRemoves dust or dirt attached to the card.
D Cleaning roller shaft
vWhen a card jam occurs, attach a jog dial to turn the cleaning
roller.
E Ink ribbon cassette
vFor installing the ink ribbon.
F Jog dials
vFor removing jammed cards by turning it after it is detached from
the printer unit and attached to the shaft.
G Retransfer film cassette
vFor installing the retransfer film.
H Cassette buttons
vPress these buttons in order to pull out the ink ribbon cassette or
retransfer film cassette.
Ink Ribbon Cassette
.
A Guide shaft
vProvides guide to the position for installing the cassette.
B Shafts
vFor installing the ink ribbon.
C Bobbin holder (black)
vFor securing the take-up side of the ink ribbon.
D Bobbin holder (yellow)
vFor securing the unused side of the ink ribbon.
Retransfer Film Cassette
.
A Bobbin holder (black)
vFor securing the take-up side of the retransfer film.
B Guide shaft
vProvides guide to the position for installing the cassette.
C Shafts
vFor installing the retransfer film.
D Bobbin holder (green)
vFor securing the unused side of the retransfer film.
Before Use
9
Specifications
Main Specifications
Item Description
Recording system Dye sublimation retransfer
Paper feed mode Automatic
Recording density 300 dpi
Reproduction
gradation
256 levels each for Y, M and C
2 levels for Resin K
Interface USB2.0(Hi-speed/Full Speed)
Ethernet(100BASE-TX/10BASE-T)
Operating
environment
conditions
Temperature: 15 °C to 30 °C
(When peel-off ink, UV ink is used: 17 °C to 28 °C)
Humidity: 35 % to 70 % No condensation
(When peel-off ink, UV ink is used: 35 % to 60 %)
Storage
environment
conditions
<Printer unit>
Temperature: -15 °C to 55 °C
Humidity: 20 % to 80 %
<Printing media (retransfer film or ink ribbon) /
card>
Temperature: 5 °C to 25 °C
Humidity: 40 % to 60 %
Power supply AC 100 V - 120 V, 50 Hz/60 Hz
AC 220 V - 240 V, 50 Hz/60 Hz
Current
consumption
3.5 A (100 V system)
1.6 A (200 V system)
Power
consumption
310 W (maximum power when all options are
installed)
Mass approx. 13.5 kg (single-sided printer, including
bend remedy unit)
Dimensions 343 mm x 335 mm x 322 mm (W x H x D)
Outline Dimensional Drawing
.
*The specifications and appearance of this product may be modified
for improvement without prior notice.
Accessories/Products Sold Separately
Accessories
Please check to ensure that the printer accessories are in place
when unpacking the product package.
vCD-ROM x 1
vInstruction Manual x 1
v“READ ME FIRST”(LST1004) x 1
vPower Cord (2 m) x 2
vCleaning Card x 1
vCard Stacker x 1
vUSB 2.0 Cable (2 m) x 1
vGloves x 1
vTweezers x 1
Products Sold Separately
To purchase these items, please consult our authorized dealers.
Use the retransfer film or ink ribbon within one year after purchase.
vYMCK (1000 frames/roll) Set, Model: CY-P340A-DN
vYMCKP (750 frames/roll) Set, Model: CY-P35PA-DN
vInk Ribbon (YMCKK) 750 frames/roll, Model: CY-35K-75D
vInk Ribbon (YMCKU) 750 frames/roll, Model: CY-35U-75D
vRetransfer Film 1000 frames/roll, Model: CY-3RA-100
vCleaning Kit, Model: CX210-CKIT1
Magnetic Head Cleaning Card (5 Pcs), Cotton Swab (5 Large and
5 Small), Cleaning Wipes (1 Box)
vCleaning Card, Model: CX210-CC1
10 Pcs/Set
Before Use
10
Inhaltsverzeichnis
Andere DNP Drucker Handbücher
DNP
DNP DS?RX1 Gebrauchs- und Pflegehandbuch
DNP
DNP QW410-SET Bedienungsanleitung
DNP
DNP DS?RX1 Versionshinweis
DNP
DNP CX-120 Bedienungsanleitung
DNP
DNP DS40 Bedienungsanleitung
DNP
DNP CX-320 Bedienungsanleitung
DNP
DNP DS620A Bedienungsanleitung
DNP
DNP IDW520 Bedienungsanleitung
DNP
DNP DP-DS80D Bedienungsanleitung
DNP
DNP CX-330 Bedienungsanleitung
DNP
DNP Q8 Bedienungsanleitung
DNP
DNP CL-500 Bedienungsanleitung
DNP
DNP CX-120 Bedienungsanleitung
DNP
DNP DS-SL10 Bedienungsanleitung
DNP
DNP DS40 Installationsanleitung
DNP
DNP QW410 Bedienungsanleitung
DNP
DNP DS-621 Benutzerhandbuch
DNP
DNP DS40 Leitfaden
DNP
DNP DP-QW410 Bedienungsanleitung
DNP
DNP DP-DS820 Series Bedienungsanleitung
