DNP ID400 DC3 Bedienungsanleitung

Inhaltsverzeichnis

Andere DNP Drucker Handbücher

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Preparing the System for First Use

Prepping the Camera

1. The camera battery must be charged before use. Use the supplied battery

charger and allow at least 2 hours to fully charge.

2. Clean the LCD surface on the back of the camera. Apply the

guideline sticker to the camera LCD surface (shown in blue at

right). The guideline helps to ensure the proper placement of

your subject when taking ID photos.

3. Power ON the camera (red arrow at right):

a. Select a desired language.

b. Select a desired location by following

the on screen instructions, and then

press the ● on the control button.

c. Set [Date & Time format], [Summer

Time], and [Date & Time] then select [OK] → [OK].

d. Set the camera image size to 5-Meg and the ratio to 4:3.

4. Slide the bottom cover to open the SD card slot. Insert the Camera SD card

(labeled “C”) into the card slot and click it into place. Close the SD card cover.

Prepping the Printer

1. Power ON the printer.

2. It takes about 25 seconds for the green light on the printer to blink, showing

you have a good connection/signal strength.

Selecting the Printer Settings

1. Press the MENU button.

2. Press the DOWN arrow on the control button to display [ID PHOTO LAYOUT]

on the LCD display.

3. Press the RIGHT arrow. The layout names appear.

4. Press UP and DOWN to select the correct country option (for example, USA

PASSPORT is selected for United States passport photos). Press the EXEC

button to save your changes.

5. The selected layout name appears under [READY].

NOTE:

If the antenna icon appears instead, press UP or DOWN to display the layout

name.

6. Press the MENU button.

7. Scroll to the COLOR ADJUST option and press the RIGHT ARROW button.

8. On COLOR ADJUST COLOR press the RIGHT arrow again.

9. Use the DOWN arrows to select SHARPNESS. Use the LEFT and RIGHT arrows

to change the setting to +2.

10.Scroll down again to the GAMMA setting. Use the LEFT and RIGHT arrows to

change the setting to +1.

11.Press the DOWN arrow to select SAVE SETTINGS and press the EXEC button.

ID400 DC3 Installation Guide

© 2014 DNP IMS America Corp. All rights reserved. www.dnpphoto.com

Reproduction in whole or part without written permission is prohibited. DOC-I-ID400-DC3

Specications subject to change without notice. Rev: 06.2014



MENU

MOVIE

W T

>

Loading the Printer Media

1. Load the paper with the arrow pointing toward the printer (DNP ID Photo

watermark side down).

2. Remove the protective sheet and set it aside for future use as a cleaning

sheet.

3. Insert the paper until it clicks into place.

4. Press the PUSH OPEN area at the top of the cartridge compartment to open

it. Insert the print cartridge until it clicks into place.

Taking a Passport Picture

1. When shooting, follow these guidelines:

• For best results with the

Camera auto-exposure, use

a light colored non-reective

background screen.

• Keep the face within the frame

of the guideline.

• The top of the head should align

with the top of the frame and

the bottom of the chin should

align with the bottom of the

frame.

2. Stand about six (6) feet from your subject.

NOTE:

Use the camera zoom functionality to make adjustments. It is best to remain

about 6 feet from the subject.

3. Make sure that the camera is horizontal with the

subject’s eyes.

4. With the subject aligned as shown, press the

camera’s shutter button.

Printing your Picture

1. Press the Play button to review the image.

2. Press the Menu button and scroll down to

DPOF. Press the center button to select.

3. It will take about 20 to 30 seconds to transfer your image to the printer so

that printing will begin.

© 2014 DNP IMS America Corp. All rights reserved. www.dnpphoto.com

Reproduction in whole or part without written permission is prohibited. DOC-I-ID400-DC3

Specications subject to change without notice. Rev: 06.2014

>

Technical Support

Telephone

1.888.749.3587

FAX 1.704.784.7196

Email

(Used for technical issues)

Technical Support Email Address:

[email protected]

Mailing Address

DNP IMS America, Corp.

4524 Enterprise Drive NW

Concord, NC 28027

Please contact DNP Tech Support prior to sending

any items. All returns require a Return Authorization

Number for proper handling. Please contact our

Support Center for further details.

ID400 DC3 Installation Guide