Dolby Laboratories LC19SB25U - LC - 19" LCD TV Bedienungsanleitung

LC-19SB15U

LC-19SB25U

LC-19SB25U-W

OPERATION MANUAL

IMPORTANT:

To aid reporting in case of loss or theft, please record the

TV's model and serial numbers in the space provided. The

numbers are located at the rear of the TV.

Model No.:

Serial No.:

LIQUID CRYSTAL TELEVISION

ENGLISH

IMPORTANT INFORMATION

ENGLISH

• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby

Laboratories.

• “HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.”

IMPORTANT INFORMATION

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-19SB15U/LC-19SB25U/LC-19SB25U-W

Trademarks

• Products that have earned the ENERGY STAR®are designed to protect the environment through superior energy

efciency.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years

of trouble-free operation of your product, please read the Important Safety Instructions carefully before

using this product.

IMPORTANT SAFETY INSTRUCTIONS

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash

bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the

product on an unstable base can cause the product to fall, resulting in serious personal injuries

as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended

by the manufacturer or sold with the product. When mounting the product on a wall, be sure to

follow the manufacturer's instructions. Use only the mounting hardware recommended by the

manufacturer.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not

cover or block these vents and openings since insufﬁcient ventilation can cause overheating

and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other

similar surface, since they can block ventilation openings. This product is not designed for built-

in installation; do not place the product in an enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer's instructions are followed.

• Heat — The product should be situated away from heat sources such as radiators, heat

registers, stoves, or other products (including ampliﬁers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you ﬁne picture details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁxed point of blue, green or red. Please note that this

does not affect the performance of your product.

• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the

product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in

case the panel breaks.

• Lightning — For added protection for this television equipment during a lightning storm, or

when it is left unattended and unused for long periods of time, unplug it from the wall outlet

and disconnect the antenna. This will prevent damage to the equipment due to lightning and

power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead

power lines or other electric light or power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with them might be fatal.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna

system is grounded so as to provide some protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location

of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

ANTENNA

LEAD IN WIRE

GROUND

CLAMP

NEC — NATIONAL ELECTRICAL CODE

• To prevent ﬁre, never place any type of candle or ﬂames on the top or near the TV set.

• To prevent ﬁre or shock hazard, do not expose this product to dripping or splashing.

No objects ﬁlled with liquids, such as vases, should be placed on the product.

• To prevent ﬁre or shock hazard, do not place the AC cord under the TV set or other heavy

items.

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may

scratch the panel surface.

• Use a soft damp cloth to gently wipe the panel when it is really dirty.

(It may scratch the panel surface when wiped strongly.)

• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it,

such materials may damage the panel surface.

• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE

SYSTEM

(NEC ART 250, PART H)

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

IMPORTANT SAFETY INSTRUCTIONS

• When cleaning the TV or the stand, use the cloth supplied with the TV.

IMPORTANT SAFETY INSTRUCTIONS

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and larger

ﬂat panel displays are popular purchases. However, ﬂat panel displays are

not always supported on the proper stands or installed according to the

manufacturer’s recommendations.

Flat panel displays that are inappropriately situated on dressers, bookcases,

shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

The consumer electronics industry is committed to making home entertainment

enjoyable and safe.

•

TUNE INTO SAFETY

One size does NOT ﬁt all. Follow the manufacturer’s recommendations for the

safe installation and use of your ﬂat panel display.

Carefully read and understand all enclosed instructions for proper use of this

product.

Don’t allow children to climb on or play with furniture and television sets.

Don’t place ﬂat panel displays on furniture that can easily be used as steps,

such as a chest of drawers.

Remember that children can become excited while watching a program,

especially on a “larger than life” ﬂat panel display. Care should be taken to

place or install the display where it cannot be pushed, pulled over, or knocked

down.

Care should be taken to route all cords and cables connected to the ﬂat panel

display so that they cannot be pulled or grabbed by curious children.

•

Note: CEA is the preeminent trade association promoting growth in the $161

billion U.S. consumer electronics industry. More than 2,200 companies enjoy the

beneﬁts of CEA membership, including legislative advocacy, market research,

technical training and education, industry promotion and the fostering of business

and strategic relationships.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer and/or listed by an independent

laboratory (such as UL, CSA, ETL).

Follow all instructions supplied by the display and wall mount manufacturers.

If you have any doubts about your ability to safely install your ﬂat panel display, contact your retailer about

professional installation.

Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not

designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a

professional installer.

A minimum of two people are required for installation. Flat panel displays can be heavy.

•

Supplied accessories

• Always use the AC cord supplied with the TV.

Remote control unit (g1)

“AA” size manganese battery (g2)

Page 9

Make sure the following accessories are provided with the product.

AC cord (g1)

Page 8

Operation manual

(g1)

Cable Clamp (g1)

Page 8

Cleaning cloth (g1)

Page 5

Hex key (g1)

Page 7

Screws (g3)

Page 7

Stand (g1)

Page 7

Before using the TV unit

21Insert the stand into the

openings on the bottom of

the TV.

2Insert and tighten the 3

screws into the 3 holes on

the rear of the stand.

Soft cushion

NOTE

• To detach the stand, perform the steps in reverse order.

Conﬁrm the 3 screws supplied with the TV.

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

CAUTION

• Attach the stand in the correct direction.

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

Screws (g3)

(Used in step 2)

Attaching the stand

QUICK REFERENCE

Notes on installing the TV

• Avoid direct sunlight and place the TV in a well-ventilated location.

• Place the TV in a level location.

• Do not turn on the power of the TV before connecting the AC cord.

QUICK INSTALLATION TIPS

Attach your antenna to the back of the

television. (See page 13.)

Bundle the cords properly with cable clamps .

How to turn on the television for the ﬁrst time.

A) Press POWER on television.

POWER

POWER indicator

Connect the AC plug for the television into the

AC outlet.

B) POWER indicator on the front of the

television lights GREEN.

• Speakers cannot be detached from the TV.

• To change the vertical angle of the LCD TV set, tilt

the screen up to 2.5 degrees forward or 10 degrees

backwards. Please adjust the angel so that the LCD TV set

can be watched most comfortably.

AC outlet

• Place the TV close to the AC outlet, and keep the power

plug within reach.

•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES

WITH THE AC CORD CONNECTED.

Ventilation & Cleaning Tips

Keep your television in a well ventilated area and make sure not to place it by a heat source or use near water. The

television is designed for AC use only and should be used with supplied AC cord.

Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and

avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use

liquid or aerosol cleaners.

The screen is glass and can be scratched or broken when dropped or impacted.

Cable calmp

AC cord

QUICK REFERENCE

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical

leakage in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a

rash. If you ﬁnd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

1 Open the battery cover.

• Place the batteries with their terminals

corresponding to the (e) and (f)

indications in the battery compartment.

2Insert two “AA” size batteries

(supplied with the product).

3Close the battery cover.

IMPORTANT:

The POWER indicator on the television should light GREEN indicating you have power to the television.

If the POWER indicator on the television still does not light up, press POWER on the remote

control to turn the power on.

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS.

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.

17Q(5 m)

Remote control sensor

IMPORTANT INFORMATION ................................. 1

Trademarks............................................................. 2

DEAR SHARP CUSTOMER .................................... 3

IMPORTANT SAFETY INSTRUCTIONS................. 3

Supplied accessories............................................. 7

Before using the TV unit .........................................7

QUICK REFERENCE............................................... 8

Contents................................................................ 10

Part names .............................................................11

TV (Front)...........................................................11

TV (Side/Rear)....................................................11

Remote control unit ...........................................12

Preparation ............................................................13

Using the remote control unit.............................13

Cautions regarding the remote control

unit .............................................................13

Antennas ...........................................................13

Connecting a VCR, game console

or camcorder...................................................13

Connecting a Blu-ray disc player, HD-DVD player,

DVD player or a Digital TV STB (Air or Cable) ...14

Using Digital Audio Output.................................14

Connecting HDMI equipment.............................15

Connecting a PC ...............................................15

PC compatibility chart........................................15

Watching TV...........................................................16

Turning on the power.........................................16

Turning off the power.........................................16

Initial setup ........................................................17

Simple button operations for

changing channels .........................................18

Displaying the receiving channel information ......18

Simple button operations for

changing volume/sound .................................19

Setting MTS/SAP stereo mode ..........................20

Setting Digital broadcasting audio mode............20

Basic adjustment settings ................................... 21

Menu operation buttons.................................... 21

On-Screen Display............................................ 21

Menu items for TV/INPUT 1/2 ........................... 22

Menu items for HDMI/PC-IN ............................. 22

EZ Setup .......................................................... 23

Channel Setup.................................................. 23

Favorite channel setting .................................... 25

Picture adjustments .......................................... 26

OPC setting ................................................. 26

Advanced picture settings................................. 27

C.M.S. ..........................................................27

Color Temperature ....................................... 27

Film Mode ................................................... 27

3D-Y/C ........................................................ 27

Monochrome ............................................... 27

I/P Setting .....................................................27

Sound adjustment ............................................ 28

Power Control .................................................. 29

Power Management ..........................................29

Using external equipment.................................... 30

Displaying an external equipment image ........... 30

Displaying an image from HDMI equipment....... 31

Useful adjustment settings.................................. 32

Auto Sync. Adjustment

(for Analog PC input mode only) ..................... 32

Fine Sync. Adjustment ...................................... 32

Picture Rotate....................................................33

Language setting .............................................. 34

Image position .................................................. 34

Reset................................................................ 34

Input Label........................................................ 35

Sleep Timer ...................................................... 35

View Mode for 4:3 Programs ............................ 36

View Mode for HD Programs ............................ 36

View Mode (for PC input mode) ........................ 37

Advanced Option settings................................. 38

DNR..............................................................38

Audio Only ................................................... 38

Color System ............................................... 38

Digital Audio................................................. 39

AV MODE ......................................................... 40

Input Signal (for Analog PC input mode only) .... 40

Closed Captions and Digital Closed

Captions......................................................... 41

Digital Caption Setup ........................................ 42

Secret number setting for parental control ........ 43

Parental control (setting V-CHIP level) ............... 45

How to temporarily release

the V-CHIP BLOCK ........................................ 48

Reactivating the temporarily released

V-CHIP BLOCK .............................................. 48

Other viewing options .......................................... 49

Freezing images................................................ 49

Appendix ............................................................... 50

Troubleshooting................................................ 50

Troubleshooting-Digital broadcasting................ 50

Speciﬁcations .................................................. 51

Information on the software license for this

product ...........................................................53

Calling for Service ................................................ 54

LIMITED WARRANTY ........................................... 54

Dimensional drawings

• The dimensional drawings for the LCD TV set are shown on

the inside back cover.

Contents

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Dolby Laboratories Flachbildfernseher Handbücher

Dolby Laboratories

Dolby Laboratories TFDVD 2695 Bedienungsanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Samsung

Samsung LT-P326W Bedienungsanleitung

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Samsung

Samsung LNR1550X Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung

JVC

JVC LT-32Z48 Bedienungsanleitung

Sony

Sony KE-42XBR900 - 42" Xbr Plasma Wega™ Integrated... Gebrauchsanweisung

Vizio

Vizio M190MV Gebrauchs- und Pflegehandbuch

Philips

Philips Brilliance 298X4 Bedienungsanleitung

Samsung

Samsung UN55F7050AF Bedienungsanleitung

Philips

Philips 1EMN26039A Bedienungsanleitung

RCA

RCA TruFlat F20TF30 Bedienungsanleitung

Samsung

Samsung LW32A33W Kurzanleitung

Philips

Philips 37PF5520D Bedienungsanleitung

Sony

Sony FD Trinitron Wega KV-30HS420 Bedienungsanleitung

Philips

Philips 32PFL7782D Bedienungsanleitung

Sanyo

Sanyo CA21KS2 Bedienungsanleitung

Samsung

Samsung PN50A550S1F Bedienungsanleitung