Dometic PJS118 Bedienungsanleitung
PJS118
Jump Starter
Operating manual
EN
POWER & CONTROL
JUMP STARTER
PJS118 Explanation of symbols
EN
3
Please read this instruction manual carefully before first use, and store it in a safe place.
If you pass on the product to another person, hand over this instruction manual along
with it.
Table of contents
1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
6 Using the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8 Maintaining and cleaning the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10 Disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
12 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
1 Explanation of symbols
!
!
A
I
WARNING!
Safety instruction: Indicates a hazardous situation that, if not avoided, could result in
death or serious injury.
CAUTION!
Safety instruction: Indicates a hazardous situation that, if not avoided, could result in
minor or moderate injury.
NOTICE!
Indicates a situation that, if not avoided, can result in property damage.
NOTE
Supplementary information for operating the product.
General safety instructions PJS118
EN
4
2 General safety instructions
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences and incorrect connection voltage
• Alterations to the product without express permission from the manufacturer
•Useforpurposesother than those described in the operating manual
The declaration of conformity can be requested from the manufacturer (contact information on the
back).
Note the following basic safety information when using electrical devices to protect against:
• Electric shock
•Firehazards
•Injury
2.1 General safety
!WARNING! INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
• Only use the device as intended.
• Disconnect the device from the mains
– Before cleaning and maintenance
–Afteruse
• Do not use this product in the bathroom or other wet areas or near water.
• Do not dismantle the device.
• Keep the product away from children.
• Do not reverse the connections of output or input.
• Do not throw the product into fire.
• Do not use the charger whose charging.
Charging Voltage is more than the product to charge.
• Only charge the product when the ambient temperature is between 0°C to 40°C.
• Do not hit or throw the product.
• If there is problem with charging, contact your dealer.
• Keep the product away from the flammable objects (e.g. bedding or carpet).
• If the product becomes hot and/or discoloured please stop using as this may lead to
a fire.
•Electrical devices are not toys.
Always keep and use the device out of the reach of children.
• Children must be supervised to ensure that they do not play with the device.
ANOTICE! MATERIAL DAMAGE.
• Do not insert foreign objects into the output or input terminals.
• Do not put fingers or hands into the device.
PJS118 Scope of delivery
EN
5
• Before using for the first time, charge your jump starter using one of the methods
described in chapter “Charging the jump starter” on page 11.
• Before charging the jump starter for the first time, check that the voltage specification
on the rating plate matches that of the power supply.
• Never pull on the power cord to unplug the device from the power socket.
• Store the device in a dry and cool place.
2.2 Operating the device safely
!WARNING! INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS.
• Only use the jump starter for to the intended purpose described in chapter “Intended
use” on page 6.
Use of an attachment not recommended or sold by the manufacturer may result in a
risk of fire, electric shock, or personal injury.
• When charging the jump starter ensure that the power socket is readily accessible.
!CAUTION! FIRE AND/OR EXPLOSION HAZARD.
•Donot operate the device
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions
•Donot place the device next to heat sources such as fires.
• Place the device in a shady place. Avoid direct sun exposure in hot and humid sur-
roundings for a proper usage.
ANOTICE! MATERIAL DAMAGE.
• Do not disconnect any cables when the device is still in use.
3Scopeofdelivery
The jump starter comes with the following provided equipment:
•ProductManual
•PJS118unit
•Homecharger
•Carcharger
•Universal4-in-1USBCable
• Intelligent battery clamp
• Laptop charging cable
• 8 different laptop connectors/charging adapters ( fits most laptop charging ports)
• Storage case with zipper and handle
Intended use PJS118
EN
6
4Intendeduse
The PJS118 jump starter is designed for charging digital devices like tablets, mobile phones, lap-
tops etc. The device can also be used to jump start vehicles with 12V batteries (up to 6L petrol or
4L diesel engines).
Intended use also includes observing all the information and safety instructions in this manual.
The jump starter is suitable
• to be used as a jump battery for a vehicle,
• to be used as a charger or as a power source for USB devices.
The jump starter is not intended to be used by children and persons with limited mental abilities or
without the required specialist knowledge. Keep children away from the device.
The jump starter is not allowed
• to be used in parallel connection with other two jump starters.
• to jump start a deeply discharged or defective vehicle battery.
• for commercial use.
5 Technical description
The jump starter is a compact and handy starting aid & power station to jump empty vehicle batter-
ies. Mobile power consumers such as mobile phones, tablets, cameras, etc. can be quickly and
easily recharged.
The jump starter uses a powerful lithium polymer battery. The status of charge can also be quickly
read via a build in display.
The device includesan integrated LED work light with continuous light, strobelight and SOS signal
for emergency situations.
Technical description PJS118
EN
8
The jump starter enables mobile power supply for USB devices and as a jump starter for a vehicle
starter battery.
The device has the following protective functions:
• Voltage stabilization protection
• Over-voltage protection
• Overload protection
• Over discharge protection
• Over temperature protection
• Balanced charge
The intelligent battery clamp (fig. 210) has a build in indication LED and a buzzer.
It also has additional protective functions, refer to chapter “Protective functions” on page 17.
No. in
fig. 2Description
9 Socket for intelligent battery clamp
10 Intelligent battery clamp
2
PJS118 Technical description
EN
9
5.2 Display
The display shows the operational status of the jump starter.
The charging indicator (fig. 31) shows the current state of charge between 0% (discharged) up
to 100% (fully charged).
The input indicator (fig. 32) shows up in the display when the device is being charged.
The output indicator (fig. 33) shows up in the display when the device is supplying energy to any
USB port.
The supply indicator for USB voltage and current (fig. 34) shows the 5 V USB charging current
when a device is connected to the port.
The supply indicator for the laptop charging port (fig. 3or 5) shows the selected output Voltage
12V, 16V or 19V.
No. in
fig. 3Description
1 Charging indicator - state of charge as a percentage
2 Input indicator - device is being charged
3 USB output indicator - device is outputting power
4 Supply indicator - USB charging voltage and current
5 Supply indicator - Laptop charging port voltage
3
Using the appliance PJS118
EN
10
6 Using the appliance
6.1 Before first use
➤Before first use or storing, charge the jump starter until it is fully charged.
➤Observe the information given in chapter “Charging the jump starter” on page 11.
6.2 Starting and switching on/off
Switching on the jump starter
➤Slide the On-Off switch (fig. 14, page 7) to the On position.
➤Press the power button (fig. 13, page 7).
✓The device is ready to use.
✓The display (fig. 3, page 9) shows the operational status.
✓The display switches off automatically after 1 minute.
Switching the display on
➤When display is switched off press the power button (fig. 13, page 7).
✓The display (fig. 3, page 9) switches on.
Switching off the jump starter
The jump starter switches off automatically if no load and no charger are connected.
➤Slide the On-Off switch (fig. 14, page 7) to the Off position.
Inhaltsverzeichnis
Andere Dometic Fernstartsystem Handbücher
