Dorma ED900 Bedienungsanleitung

ED900 POWER CORD INSTALLATION

—

DORMA AMERICAS, Inc. Dorma Drive, Drawer AC Toll-Free: 800-523-8483 E-mail: [email protected]

08122560 08/14 Reamstown, PA 17567 Fax: 800-274-9724 Subject to change without notice

Installing the power cord

1.1 Disassemble the conduit box assembly, by removing

the pan head screw from the terminal block using a #1

phillips screw driver.

1.2 Slide the conduit box underneath the mounting plate.

1.3 Insert the pan head screw into the terminal block,

bushing and conduit box by using a #1 phillips screw

driver (5in-lbs).

Conduit box

Screw

Terminal block

1. 110V power cord

2. Conduit box

3. Cord grip

4. Wire nut

Bushing

Mounting

plate

The flexible power cord should not be routed through doorways, window openings, walls, ceilings, floors, or the like. The

cord should also not be attached or secured to the building structure. The cord cannot be concealed behind walls and the

like. Make sure the power cord does not become entrapped in any moving parts of the operator, door, or system.

To reduce the risk of electric shock, this equipment has a grounding type plug, that has a third (grounding) pin. This plug

will only fit into a grounding type outlet. IF the plug does not fit into the outlet, contact a qualified electrician to install

the proper outlet. Do not change the plug in any way.

For in-wall mounting: When installing the socket, please remember that the socket should be reached by hand.

(maximum 14" away)

ATTENTION! Connect the power cord to 120V 60 Hz ONLY.

WARNING! Power cords pose a rise of becoming entrapping in moving parts of the operator, door or system.

ED900 POWER CORD INSTALLATION

DORMA AMERICAS, Inc. Dorma Drive, Drawer AC Toll-Free: 800-523-8483 E-mail: dormaarchitectural@dorma. com

08122560 08/14 Reamstown, PA 17567 Fax: 800-274-9724 Subject to change without notice

2.1 Punch out the hole in the conduit box best suited for the

application.

2.2 Place the power cord into the grommet portion of the

cord grip and insert the cord grip into the hole using

pliers to compress it.

Hole

Conduit box

Cord

grip

Wiring the ED900

1.1 Loosen the terminal block connections and secure each

wire of the 110V power cable into its proper location on

the terminal block.

Black (live) = upper terminal

White (neutral) = lower terminal

Green (ground) = connect to ground wire

1.2 Align the mounting plate/conduit box assembly with the

bottom of the ED900 unit.

1.3 Feed the terminal block power cable through the bottom

of the plastic housing. CAUTION: DO NOT DAMAGE THE

WIRES.

2.1 Insert the male connection end of the main power cable

into the female connector inside the housing.

Terminal block Power cable

ED900 unit

Mounting plate/conduit box

Terminal

block power

cable

Housing

Male

connection

end

Female

connection

end

Andere Dorma Türöffnungssystem Handbücher

Dorma

Dorma TS 68 Bedienungsanleitung

Dorma

Dorma 8900 FH Bedienungsanleitung

Dorma

Dorma PT 40 Bedienungsanleitung

Dorma

Dorma 8616 PH Bedienungsanleitung

Dorma

Dorma 8900 DS Bedienungsanleitung

Dorma

Dorma ES 200 Bedienungsanleitung

Dorma

Dorma MUTO COMFORT M DORMOTION 50 Benutzerhandbuch

Dorma

Dorma AS 350 Bedienungsanleitung

Dorma

Dorma PT 51 Bedienungsanleitung

Dorma

Dorma AGILE 150 Bedienungsanleitung

Dorma

Dorma CS 80 MAGNEO Leitfaden

Dorma

Dorma 8600 TDE Bedienungsanleitung

Dorma

Dorma ED 200 Benutzerhandbuch

Dorma

Dorma 7436 T Bedienungsanleitung

Dorma

Dorma UNIVERSAL ARCOS Bedienungsanleitung

Dorma

Dorma ED700 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM PT 22 Bedienungsanleitung

Dorma

Dorma TS93 T Bedienungsanleitung

Dorma

Dorma G-EMF Series Bedienungsanleitung

Dorma

Dorma TS 99 FL Handbuch

Dorma

Dorma 8600 Series Bedienungsanleitung

Dorma

Dorma 7400 TDE Bedienungsanleitung

Dorma

Dorma 8900 AF Bedienungsanleitung

Dorma

Dorma 7400 AO8 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Label

Label NEPTIS/LE Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Series Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Olide

Olide 120B Bedienungsanleitung

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung