DPS Telecom T/Mon NOC Bedienungsanleitung

Andere Handbücher für T/Mon NOC

1

Dieses Handbuch passt für folgende Modelle

2

Andere DPS Telecom Netzwerk-Hardware Handbücher

DPS Telecom

DPS Telecom NetGuardian 832A G5 Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 832A Bedienungsanleitung

DPS Telecom

DPS Telecom T/Mon/IAM Bedienungsanleitung

DPS Telecom

DPS Telecom Net Dog 82 IP Bedienungsanleitung

DPS Telecom

DPS Telecom Remote Status Panel Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 216 G3 Bedienungsanleitung

DPS Telecom

DPS Telecom DAC-P Bedienungsanleitung

DPS Telecom

DPS Telecom HVAC Controller G3 Bedienungsanleitung

DPS Telecom

DPS Telecom ECU LAN Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 216F Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 832A Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 16 G2 Bedienungsanleitung

DPS Telecom

DPS Telecom CellVoice 16 Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian ENV Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 216 G4 Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 420 Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 832/864A Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 240T Gebrauchsanweisung

DPS Telecom

DPS Telecom NetGuardian AAR HC Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian BSM Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 16A Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 480 G3 Bedienungsanleitung

DPS Telecom

DPS Telecom NetGuardian 832A Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung

Problem: Unable to Setup a NetGuardian to be Polled by T/Mon

Platform: NetGuardian & T/Mon NOC/SLIM

Setting up T/Monto poll a NetGuardianis a commonand

important part of new RTU deployments. If T/Moncan’t poll

your remotes, youdon’t have the visibilityyouneed to do

your job.

Use the following “techno knowledge” paper to setup T/Mon

to poll a NetGuardianand troubleshoot commonissues.

• Youare unable to setup your T/Monto poll a NetGuardian.

Quick Reference Chart

(for more details, review the troubleshooting checklist, starting onpage 2 of this guide)

This “techno knowledge” paper can help you if:

1

Trouble Shooting Checklist: T/Mon Edit Procedure1

From TMonEdit, check the All boxin the top right corner of the options menu.

Select Remotes >> LAN-based Remotes >> Your Device

Fill in the NetGuardian Definition screenappropriatelyfor the NetGuardian youare setting up.

NOTE: The Base Address field should matchthe Unit ID number onthe NetGuardian

2

Select your device inthe Device menu

Enter the firmware versioncurrentlyloaded onyour NetGuardian

Enter the Address Defaults settings (see page 7-11 inthe T/MonXM User Manual for details)

3

Select the Displays tab inthe device menu. This screenshows alldisplaypoints and

descriptions.

Double click the Discretes (Display1) descriptionto view the discrete alarminputs.

Input data for your discrete alarmpoints similar to the example screens below (refer to page 7-

13 of the T/MonXM User Manual for details):

4

Trouble Shooting Checklist: T/Mon Procedure2

From the Master Menu of the T/Monselect the ‘Parameters’ option. This willopen the

Parameters Menu.

From the Parameters Menuselect ‘Remote Ports’. This will put youin the Remote Parameters

mode.

5

NOTE: The steps in this box are only necessary if this is the first time your are setting

up your T/Mon to use a LAN connection

The Remote Parameters screen willdefault to the last port that was being edited. To find Port

28, press the ‘F’ keyand find a port. Enter ‘28’ and press ‘Enter’ to find Port 28.

Press ‘E’ to enter Edit mode.

Use the ‘Tab’ keyto select “ETHERNET I/O”.

Press ‘F’ to Find or press ‘N’ repeatedlyto reachanyavailable job port above 50. Anavailable

job port will have a “Port usage” of “HALTED”.

Once youhave found anyavailable (“HALTED”) job above 50, press ‘E’ to enter Edit Mode.

6

Use the ‘TAB’ keyto select the “DCP(F) INTERROGATOR” and press ‘Enter’.

Set eachfield to the value that appears inthe screencapture below:

NOTE: After filling inthe fields, youshould see a <No Data Connection> message.

7

Press ‘F6’ to reachthe Data Connectionscreen

Press ‘F1’ to reach the Ethernet TCP Port Definitionscreen.

Use the ‘TAB’ keyto select “UDP”.

Set the TCP port to the same port number that youchose whenconfiguring the NetGuardian

(default is 2001).

Press ‘F8’ to save your changes.

Exit back to the Master Men

Select ‘Files’ from the Master Menuto reachthe Files Maintenance Menu.

8

Select ‘Windows’ from the menuto reachthe Window Definitionscreen.

From the “Window Definition” screen, youcanset up analarm window to send your

NetGuardian’s alarms to later inthis procedure. To do so, simplymove to the end of the list and

enter a new name and descriptionfor your new alarm window.

Press F8 to save anychanges onthe “Windows Definition” screenand returnto the “File

Maintenance” menu.

Exit to the Master Menu.

Select “Initialize”

Select “Monitor”

9

Your NetGuardian should now be correctly set up within T/Mon.

To verify that your NetGuardian is being correctly polled by T/Mon, you may wish to

perform the check described below:

From the Alarm SummaryscreeninMonitor Mode, press Shift+F6 to reachthe Site Statistics

screen

Adjust view to NetGuardianpolling leg. Youshould see the number ofpolls rising as the new

NetGuardianis polled byT/Mon.

If the polls are failing, tryto ping the NetGuardian’s IP address.

If the NetGuardianresponds to pings but is not being polled correctly, check its configuration

settings. The most common errors are an incorrect TCP port or Unit ID.

If youcontinue to have issues setting up a NetGuardianwithinT/Mon, please contact DPS

Telecom TechSupport.