Draper Expert 19106 Benutzerhandbuch

19106



BRITISH

MADE

This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of

the product. Read all information before operating product.

This guide has been compiled by Draper Tools describing the purpose for which the product has been designed,

and contains necessary information to ensure its correct and safe use. By following the information contained in

this guide, it will ensure both product and operator safety, together with longer life of the product itself.

AlI photographs and drawings in this guide are supplied by Draper Tools to help illustrate the operation of the

product.

Whilst every effort has been made to ensure the accuracy of information contained in this guide, the Draper

Tools policy of continuous improvement determines the right to make modifications without prior warning.

APPLICATION GUIDE FOR:

ENGINE

TIMING KIT

1. TITLE PAGE

1.2 REVISIONS:

Date first published June 2018.

Second published September 2019.

- 2 -

As our user manuals are continually updated, users should make sure that they use

the very latest version.

Downloads are available from: http://drapertools.com

Draper Tools Limited

Hursley Road

Chandler’s Ford

Eastleigh

Hampshire

SO53 1YF

Website: drapertools.com

Product Helpline: +44 (0) 23 8049 4344

General Fax: +44 (0) 23 8026 0784

1.3 UNDERSTANDING THIS GUIDES SAFETY CONTENT:

WARNING! – Information that draws attention to the risk of injury or death.

CAUTION! – Information that draws attention to the risk of damage to the product or

surroundings.

Permission is granted to reproduce this publication for personal and educational use

only. Commercial copying, redistribution, hiring or lending is prohibited.

No part of this publication may be stored in a retrieval system or transmitted in any

other form or means without written permission from Draper Tools Limited.

In all cases this copyright notice must remain intact.

1.1 INTRODUCTION:

USER GUIDE FOR: Engine Timing Kit

Stock No: 19106

Part No: ETK232

2. CONTENTS

- 3 -

1. TITLE PAGE

1.1 INTRODUCTION..........................................................................................................2

1.2 REVISION HISTORY ..................................................................................................2

1.3 UNDERSTANDING THIS GUIDE.................................................................................2

1.4 COPYRIGHT NOTICE ................................................................................................. 2

2. CONTENTS

2.1 CONTENTS ....................................................................................................................3

3 WARRANTY

3.1 WARRANTY.................................................................................................................4

4. GENERAL PRODUCT INFORMATION

4.1 GENERAL PRODUCT INFORMATION ....................................................................... 5

5. HEALTH AND SAFETY INFORMATION

5.1 GENERAL SAFETY INSTRUCTIONS FOR USE

Personal safety...........................................................................................................6

6. CONTENTS

6.1 PARTS DRAWING AND LISTING ............................................................................... 7

7. APPLICATION

7.1 PRODUCT APPLICATION AND COMPATIBILITY LISTING ...................................... 8

8. PREPARATION

8.1 ADVISORIES BEFORE USE ...................................................................................... 9

9. PROCEDURE AND APPLICATION GUIDE

9.1 APPLICATION GUIDANCE........................................................................................10

10. EXPLANATION OF SYMBOLS

10.1 EXPLANATION OF SYMBOLS .................................................................................. 11

3. WARRANTY

3.1 WARRANTY

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be

free from defective materials and workmanship.

Should the tool develop a fault, please return the complete tool to your nearest distributor or

contact

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.

Telephone Sales Desk: (023) 8049 4333 or Product Help Line (023) 8049 4344.

A proof of purchase must be provided with the tool.

If upon inspection it is found that the fault occurring is due to defective materials or workmanship,

repairs will be carried out free of charge. This warranty period covering labour is 12 months from

the date of purchase except where tools are hired out when the warranty period is 90 days from

the date of purchase. The warranty is extended to 12 months for parts only. This warranty does not

apply to any consumable parts, any type of battery or normal wear and tear, nor does it cover any

damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs

attempted or made by any personnel other than the authorised Draper warranty repair agent.

Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will

be quoted and made accordingly.

This warranty applies in lieu of any other warranty expressed or implied and variations of its terms

are not authorised.

Your Draper warranty is not effective unless you can produce upon request a dated receipt or

invoice to verify your proof of purchase within the warranty period.

Please note that this warranty is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

- 4 -

4. GENERAL PRODUCT INFORMATION

This product is designed to be used correctly and with care for the purpose for which it is intended.

No liability is accepted by Draper Tools Limited for incorrect use or application of any of our

products, and Draper Tools Limited cannot be held responsible for any damage to personnel,

property or equipment when using this product. Incorrect use will also invalidate any warranty.

The applications database and any instructional information provided has been designed to offer

general guidance for a particular product’s use and while all attention is given to the accuracy of

the data, no project should be attempted without referring first to the manufacturer’s technical

documentation (workshop or instruction manual) or the use of a recognised authority such as

Autodata.

It is our policy to continually improve our products and thus we reserve the right to alter

specifications and components without prior notice. It is the responsibility of the user to ensure the

suitability of the product and information prior to use.

- 5 -

5. HEALTH AND SAFETY INFORMATION

- 6 -

GENERAL SAFETY INSTRUCTIONS

Warning: Please read all safety warnings and all details carefully. Failure to follow the warnings

may result in serious injury or major component damage.

Important: Draper Tools recommends that this product should not be modified or used for any

application other than that for which it was designed.

Save all warnings and instructions for future reference.

1) Personal safety

a) Stay alert, watch what you are doing and use common sense when using this product.

Do not use this product while you are tired or under the influence of drugs, alcohol or any

medication. A moment of inattention while using this product may result in serious personal

injury.

b) Use personal protective equipment as necessary.

c) Check and remove any part of the product before turning/testing the engine. A part left

attached to a rotating part of the engine may result in personal injury or major component

damage.

d) Carefully clean the tool components after every use.

f) Keep the tool components safe and tidy.

g) Do not use this product for any purpose other than for which it is designed.

Warning! Some of the packaging materials used may be harmful to children. Do not leave any of

these materials in the reach of children.

If any of the packaging is to be thrown away, make sure it is disposed of correctly; according to

local regulations.

6. CONTENTS

- 7 -

ITEM DESCRIPTION OEM STOCK No.

ACamshaft T10477 35548

Locking Plate

BCrankshaft T10340 35549

Locking Pin

CCamshaft Sprocket T10476 35550

Locking Tool

7. APPLICATION

- 8 -

The 19106 has been developed as an engine timing kit for the vehicles listed below. Three-piece

kit consisting of the components required to lock the crankshaft, cam pulley and camshaft in the

‘timed’ position allowing the removal and replacement of the timing belt.

Used on the following Vehicles:

Seat Ibiza 2015 - 2017

Seat Leon 2014 - 2015

Seat Mii 2012 - 2017

Seat Toledo 2015 - 2016

Skoda Citigo 2011 - 2017

Skoda Fabia III 2014 - 2017

Skoda Octavia III 2014 - 2015

Skoda Rapid 2015 - 2016

Skoda Yeti 2014 - 2015

Volkswagen Beetle 2011 - 2017

Volkswagen Caddy 2010 - 2015

Volkswagen Golf 2003 - 2016

Volkswagen Polo 2002 - 2014

Volkswagen Up! 2011 - 2016

Engine Codes:

1.0cc

CHYB, CHYA, CPGA, DAFA

1.6cc

CWVA, CWVB

8. PREPARATION

- 9 -

The following is for guidance only. Please refer to OEM derived data such as the vehicle

manufacturer’s own data or Autodata. The use of this product is purely down to the user’s

discretion and Draper Tools Limited cannot be held responsible for any damage caused what so

ever.

- 10 -

Depending on manufacture and model, some engine components do change. Please check with

Autodata or the manufacturer’s data before use.

9. PROCEDURE AND APPLICATION GUIDE

Set the camshaft in position using component 3 as shown.

Support Tool SE11249

Fit tensioner tool to pulley and slacken bolt A.Turn tensioner in

an anti-clockwise direction to release tension on timing belt.

Remove timing belts from sprockets

Use component 1 to set the cam shaft positions relative

to each other

Please note images are for guidance only and subject to change.

Align the timing marks according to the manufacturer’s instructions and fit the crank-

shaft alignment tool 2 as shown.

Inhaltsverzeichnis

Andere Draper Werkzeuge Handbücher

Draper

Draper TK58/BL Bedienungsanleitung

Draper

Draper 4314K Bedienungsanleitung

Draper

Draper 23313 Bedienungsanleitung

Draper

Draper 19525 Bedienungsanleitung

Draper

Draper 17819 Benutzerhandbuch

Draper

Draper 18495 Benutzerhandbuch

Draper

Draper P5 Bedienungsanleitung

Draper

Draper DTK-FORD 52576 Bedienungsanleitung

Draper

Draper 18745 Benutzerhandbuch

Draper

Draper STORMFORCE 65142 Bedienungsanleitung

Draper

Draper 98421 Bedienungsanleitung

Draper

Draper 17609 Benutzerhandbuch

Draper

Draper GPAUG52-B Bedienungsanleitung

Draper

Draper PJSK Bedienungsanleitung

Draper

Draper 15498 Benutzerhandbuch

Draper

Draper 19141 Benutzerhandbuch

Draper

Draper 27118 Benutzerhandbuch

Draper

Draper 50094 Bedienungsanleitung

Draper

Draper Storm Force SFAH4 Bedienungsanleitung

Draper

Draper PTF Bedienungsanleitung

Draper

Draper BC1000 Bedienungsanleitung

Draper

Draper A10/EXP/F Bedienungsanleitung

Draper

Draper 23310-BPF Bedienungsanleitung

Draper

Draper GPAUG52-B Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

BGS technic

BGS technic 8578 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung