Draytek Vigor2900V Bedienungsanleitung

Vigor2900V series Quick Installation Guide

Trademarks

Declarations

is protected by copyright. No part may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language without written

permission from the copyright holders.

The following trademarks are used in this document:

lMicrosoft is a registered trademark of Microsoft Corp.

lWindows, Windows 95, 98, Me, NT, 2000, XP and Explorer are trademarks of

Microsoft Corp.

lApple and Mac OS are registered trademarks of Apple Computer Inc.

Other products may be trademarks or registered trademarks of their respective

manufacturers.

Safety Instructions and Approval

Safety

Instructions

lRead the installation guide thoroughly before you set up the router.

lThe router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the router

yourself.

lDo not place the router in a damp or humid place, e.g. a bathroom.

lThe router should be used in a sheltered area, within a temperature range of +5

to +40 Celsius.

lDo not expose the router to direct sunlight or other heat sources. The housing

and electronic components may be damaged by direct sunlight or heat sources.

lKeep the package out of reach of children.

lWhen you want to dispose of the router, please follow local regulations on

conservation of the environment.

Warranty We warrant to the original end user (purchaser) that the router will be free from

any defects in workmanship or materials for a period of three (3) years from the

date of purchase from the dealer. Please keep your purchase receipt in a safe

place as it serves as proof of date of purchase. During the warranty period, and

upon proof of purchase, should the product have indications of failure due to

faulty workmanship and/or materials, we will, at our discretion, repair or replace

the defective products or components, without charge for either parts or labor, to

whatever extent we deem necessary tore-store the product to proper operating

condition. Any replacement will consist of a new or re-manufactured

functionally equivalent product of equal value, and will be offered solely at our

discretion. This warranty will not apply if the product is modified, misused,

tampered with, damaged by an act of God, or subjected to abnormal working

conditions. The warranty does not cover the bundled or licensed software of

other vendors. Defects which do not significantly affect the usability of the

product will not be covered by the warranty. We reserve the right to revise the

manual and online documentation and to make changes from time to time in the

contents hereof without obligation to notify any person of such revision or

changes.

European

Community

Hereby, we declare that the router is in compliance with the essential

requirements and other relevant provisions of R&TTE Directive 99/5/EC. The

Vigor 2900VG/VGi is designed for the WLAN 2.4Ghz network throughout EC

region, Switzerland, and the restrictions of France.

Be a Registered

Owner

Web registration is preferred. You can register your Vigor router via http://

www.draytek.com/. Alternatively, fill in the registration card and mail it to the

address found on the reverse side of the card.

Firmware & Tools

Updates

Due to the continuous evolution of DrayTek ADSL & Router technology, all

routers will be regularly upgraded. Please consult the DrayTek web site for

more information on newest firmware, tools and documents.

http://www.draytek.com/

Table of Contents

1. Introduction .............................................................................................

1.1 Brief Overview ...................................................................................

1.2 Highlights ..........................................................................................

1.3 Front Panel LEDs and Rear Panel Interfaces .......................................

1.4 Package Contains ..............................................................................

2. Quick Install Your Vigor2900V series Router ...............................

2.1 Hardware Installation ........................................................................

2.2 Configure Your Router via Quick Start Wizard ...................................

3. Wireless LAN Settings ........................................................................

3.1 General Settings .................................................................................

3.2 Security Settings .................................................................................

3.3 Access Control ..................................................................................

4. VoIP Settings ..........................................................................................

4.1 Dial Plan Setup ..................................................................................

4.2 SIP Related Function Setup ................................................................

4.3 Calling Scenario .................................................................................

5. Trouble Shooting ...................................................................................

5.1 Is the Hardware Status OK? ...............................................................

5.2 Are the Network Connection Settings on Your PC OK? ......................

5.3 Can You Ping the Router from PC? ....................................................

5.4 Are the ISP Settings OK? ...................................................................

5.5 Report to ISP and Dealer for Further Technical Support .......................

1. Introduction

The Vigor2900V series router, an Internet access solution for your LAN, which provides

you the shared web surfing and countless value-added features, such as Firewall / Security,

VPN, VoIP, USB interface printer server support, and 802.11g Wireless LAN(up to

54Mbps for Vigor2900VG/VGi only). These are all in a reliable one-box solution.

1.1 Brief Overview

VoIP

Wireless AP

Broadband Router

Vigor2900VG

Vigor2900V

Vigor2900VGi Vigor2900Vi

- -

ISDN Backup

1.2 Highlights

VoIP

lG.168 Line Echo-cancellation

lGain Control

lJitter Buffer (125ms)

lVoice Codec: G.711 A/u law, G.726, G.723.1,

G.729 A/B, VAD/CNG

lTone Generation and Detection: DTMF, Dial,

Busy, Ring Back, Call Progress

lProtocol: SIP, MGCP, RTP/RTCP (Note: The

first stage will implement SIP only, the other

protocols will be included later.)

Wireless Access Point (Vigor2900VG/VGi only)

l802.11g support (54Mbps data rate)

lBackward compatible with 802.11b device

lWireless security:

.Secure VPN over WLAN

.WPA Support

.802.1x User Authentication

.64/128 bits WEP wireless encryption

.Client MAC-address locking

.SSID stealth

WAN

lOne 10/100M Base-TX port with a RJ-45

connector

lDHCP client for cable service

lStatic IP address assignment for fixed IP

networks

lPPPoE/PPTP client for ADSL service

LAN

l4 port 10/100 Base-TX Ethernet switch with

VLAN

lDHCP server for IP assignment (up to 253 users)

lDNS cache and proxy

lNAT (Network Address Translation)

lVirtual server via port redirection or open port

lPort-based rate throttling capability

lRouting support: RIPv2, Static Route

Printer Server

lOne USB port connector

lBuilt-in LPD printer server

lProvide Win98/98SE/ME LPR printer driver

lCompatible with Win2000/XP/MacOS 9/MacOS

X built-in LPR printer driver

Firewall

lStateful Packet Inspection

lSelectable DoS/DDoS protection

lIP address anti-spoofing

lUser-configurable packet filtering

lNAT/PAT with Port Forwarding/Redirection &

DMZ

lE-mail alerting mechanism

Virtual Private Network (VPN)

lUp to 32 simultaneous VPN tunnels

lDial-in or dial-out, LAN-to-LAN or Teleworker-to-

LAN

lProtocol support for PPTP, IPSec, L2TP, L2TP over

IPSec

lAES, MPPE, and hardware- based DES/3DES

Encryption

lAuthentication support for MD5 and SHA-1

lIKE key management

lInteroperable with other leading 3rd party vendor

VPN devices or software

Flexible URL Content Filtering

lPreclude web surfing from using directly IP address

lURL blocking by user-defined keywords

lJava/ActiveX/cookies/proxy blocking

lExecutable/compressed/multimedia files blocking

lTime schedule support

Bandwidth Management facilities

lClass-based bandwidth guarantee by user-defined

traffic categories

lProvision of inbound/outbound bandwidth control

lSupport of eight priority-levels

lSupport of DiffServ-Codepoint marking

Application Support

lWindows Messenger, Yahoo Messenger, MSN

Messenger V6.0, NetMeeting, ICQ2001b/2002a,

most online gaming, and other multimedia

applications

lUPnP protocol support

Router Management

lWeb-based User Interface

lCommand line interface (Telnet)

lTelnet remote access support

lSNMP agent with MIB-II

lBuilt-in diagnostic tools

lRemote firmware upgrade

lQuick Start Wizard

lSyslog Monitoring

ISDN Facilities

lCompatible with Euro ISDN

lAutomatic ISDN backup

lSupport for 64/128kbps (multilink-PPP)

lBandwidth on demand (automatically switches

between 64kbps and 128kbps)

lLAN-to-LAN connectivity

lRemote Activation

1.3 Front Panel LEDs and Rear Panel Interfaces

1.3.1 Vigor2900V

LED Indicators Descriptions

ACT (Activity)

(P1, P2, P3, P4)

LAN

Phone

(FXS1,FXS2)

QoS

VPN

Printer

WAN

blinking

orange

green

blinking

orange

green

The router is powered on and running properly.

The QoS function is active.

The phone is off hook (the handset of phone is picked up).

A phone call is incoming

The VPN function is active.

The USB interface printer is ready.

Anormal 10Mbps WAN link is ready.

Anormal 100Mbps WAN link is ready.

Anormal 10Mbps connection is through its corresponding port.

Anormal 100Mbps connection is through its corresponding port.

Ethernet packets are transmitting.

Status

Connect to the USB printer.

Connect the included power adapter to the power outlet.

Connect to the analog phone for VoIP communication.

Connect to the local networked devices.

Connect the cable/DSL modem to access the Internet.

Descriptions

Rear Panels

Printer

PWR

Factory Reset

P1, P2, P3, P4

WAN

FXS1, FXS2

Restore the default settings.

Usage: Turn on the router (ACT LED is blinking), press the hole and keep for

more than 5 seconds. When the ACT LED begins to blink rapidly, release the

button. Then the router will restart with the factory default configuration.

blinking Ethernet packets are transmitting.

1.3.2 Vigor2900VG

LED Indicators Descriptions

ACT (Activity)

(P1, P2, P3, P4)

LAN

Phone

(FXS1,FXS2)

QoS

WLAN

Printer

WAN

blinking

orange

green

The router is powered on and running properly.

The QoS function is active.

The phone is off hook (the handset of phone is picked up).

A phone call is incoming

The USB interface printer is ready.

Anormal 10Mbps connection is through its corresponding port.

Anormal 100Mbps connection is through its corresponding port.

Ethernet packets are transmitting.

Status

Connect to the USB printer.

Connect the included power adapter to the power outlet.

Connect to the analog phone for VoIP communication.

Connect to the local networked devices.

Connect the cable/DSL modem to access the Internet.

Descriptions

Rear Panels

Printer

PWR

Factory Reset

P1, P2, P3, P4

WAN

FXS1, FXS2

Restore the default settings.

Usage: Turn on the router (ACT LED is blinking), press the hole and keep for

more than 5 seconds. When the ACT LED begins to blink rapidly, release the

button. Then the router will restart with the factory default configuration.

The Wireless LAN function is enabled.

Data packets are transmitting over Wireless LAN.blinking

orange

green

Anormal 10Mbps WAN link is ready.

Anormal 100Mbps WAN link is ready.

blinking Ethernet packets are transmitting.

1.3.3 Vigor2900VGi

LED Indicators Descriptions

ACT (Activity)

(P1, P2, P3, P4)

LAN

Phone

(FXS1,FXS2)

ISDN

WLAN

Printer

WAN

blinking

orange

green

The router is powered on and running properly.

The phone is off hook (the handset of phone is picked up).

A phone call is incoming.

The USB interface printer is ready.

Anormal 10Mbps connection is through its corresponding port.

Anormal 100Mbps connection is through its corresponding port.

Ethernet packets are transmitting.

Status

Connect to the USB printer.

Connect the included power adapter to the power outlet.

Connect to the analog phone for VoIP communication.

Connect to the local networked devices.

Connect the cable/DSL modem to access the Internet.

Descriptions

Rear Panels

Printer

PWR

Factory Reset

P1, P2, P3, P4

WAN

FXS1, FXS2

Restore the default settings.

Usage: Turn on the router (ACT LED is blinking), press the hole and keep for

more than 5 seconds. When the ACT LED begins to blink rapidly, release the

button. Then the router will restart with the factory default configuration.

The Wireless LAN function is enabled.

Data packets are transmitting over Wireless LAN.blinking

The ISDN network is correctly setup.

blinking Asuccessful remote connection on the ISDN BRI B1/B2 channel.

orange

green

Anormal 10Mbps WAN link is ready.

Anormal 100Mbps WAN link is ready.

blinking Ethernet packets are transmitting.

1.3.4 Vigor2900Vi

LED Indicators Descriptions

ACT (Activity)

(P1, P2, P3, P4)

LAN

Phone

(FXS1,FXS2)

ISDN

VPN

Printer

WAN

blinking

orange

green

The router is powered on and running properly.

The phone is off hook (the handset of phone is picked up).

A phone call is incoming.

The USB interface printer is ready.

Ethernet packets are transmitting.

Anormal 10Mbps connection is through its corresponding port.

Anormal 100Mbps connection is through its corresponding port.

Ethernet packets are transmitting.

Status

Connect to the USB printer.

Connect the included power adapter to the power outlet.

Connect to the analog phone for VoIP communication.

Connect to the local networked devices.

Connect the cable/DSL modem to access the Internet.

Descriptions

Rear Panels

Printer

PWR

Factory Reset

P1, P2, P3, P4

WAN

FXS1, FXS2

Restore the default settings.

Usage: Turn on the router (ACT LED is blinking), press the hole and keep for

more than 5 seconds. When the ACT LED begins to blink rapidly, release the

button. Then the router will restart with the factory default configuration.

The ISDN network is correctly setup.

blinking Asuccessful remote connection on the ISDN BRI B1/B2 channel.

The VPN tunnel is launched.

orange

green

Anormal 10Mbps WAN link is ready.

Anormal 100Mbps WAN link is ready.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Draytek Netzwerk-Router Handbücher

Draytek

Draytek Vigor 3300 Series Bedienungsanleitung

Draytek

Draytek Vigor2130 Series Bedienungsanleitung

Draytek

Draytek Vigor 2700 Series Bedienungsanleitung

Draytek

Draytek VigorPro 5510 Series Bedienungsanleitung

Draytek

Draytek VIGOR2820 series Bedienungsanleitung

Draytek

Draytek Vigor 2925 Series Bedienungsanleitung

Draytek

Draytek Vigor2710 Series Bedienungsanleitung

Draytek

Draytek Vigor3100 Bedienungsanleitung

Draytek

Draytek Vigor2620 Series Bedienungsanleitung

Draytek

Draytek Vigor2915 Series Bedienungsanleitung

Draytek

Draytek Vigor 2925n Bedienungsanleitung

Draytek

Draytek Vigor2110 Series Bedienungsanleitung

Draytek

Draytek Vigor3910 Series Bedienungsanleitung

Draytek

Draytek Vigor2866 Series Bedienungsanleitung

Draytek

Draytek Vigor2910 Series Bedienungsanleitung

Draytek

Draytek Vigor 2760 Series Bedienungsanleitung

Draytek

Draytek Vigor2110 Series Bedienungsanleitung

Draytek

Draytek Vigor2866 Series Bedienungsanleitung

Draytek

Draytek Vigor2927 Series Bedienungsanleitung

Draytek

Draytek VigorPro 5500 Referenzhandbuch

Draytek

Draytek Vigor 2800VG Referenzhandbuch

Draytek

Draytek Vigor2920 Series Bedienungsanleitung

Draytek

Draytek Vigor3912 Series Bedienungsanleitung

Draytek

Draytek Vigor3200 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise