Draytek Vigor2762 series Bedienungsanleitung

Vigor2762 Series

ADSL2/2+ & VDSL2 Router

Quick Start Guide

(RF Model)

Version: 1.5

Firmware Version: V3.9.6.4

(For future update, please visit DrayTek web site)

Date: June 28, 2022

Intellectual Property Rights (IPR) Information

by copyright. No part may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language without written permission

from the copyright holders.

Trademarks The following trademarks are used in this document:

Microsoft is a registered trademark of Microsoft Corp.

Windows, Windows 7, 8, 10, 11 and Explorer are trademarks of Microsoft

Corp.

Apple and Mac OS are registered trademarks of Apple Inc.

Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety

Instructions

Read the installation guide thoroughly before you set up the router.

The router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the

router yourself.

Do not place the router in a damp or humid place, e.g. a bathroom.

Do not stack the routers.

The router should be used in a sheltered area, within a temperature

range of 0 to +40 Celsius.

Do not expose the router to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight

or heat sources.

Do not deploy the cable for LAN connection outdoor to prevent

electronic shock hazards.

Keep the package out of reach of children.

When you want to dispose of the router, please follow local regulations

on conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the router will be free

from any defects in workmanship or materials for a period of two (2) years

from the date of purchase from the dealer. Please keep your purchase receipt

in a safe place as it serves as proof of date of purchase. During the warranty

period, and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for

either parts or labor, to whatever extent we deem necessary tore-store the

product to proper operating condition. Any replacement will consist of a new

or re-manufactured functionally equivalent product of equal value, and will

be offered solely at our discretion. This warranty will not apply if the product

is modified, misused, tampered with, damaged by an act of God, or subjected

to abnormal working conditions. The warranty does not cover the bundled or

licensed software of other vendors. Defects which do not significantly affect

the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

Declaration of Conformity

Hereby, DrayTek Corporation declares that the radio equipment type Vigor2762 is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address:

http://www.draytek.com.tw/ftp/Vigor2762/Document/CE/

Manufacturer: DrayTek Corp.

Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan.

Product: Vigor2762 Series

Frequency Information for Europe area:

2.4G WLAN 2412MHz - 2472 MHz, max. TX power: 19.98dBm *1

5G WLAN 5180MHz - 5700 MHz, max. TX power: 27.00dBm *2

Requirements in AT/BE/BG/CZ/DZ/DK/EE/FR/DE/IS/IE/IT/EL/ES/

CY/LV/LI/LT/LU/HU/MT/NL/NO/PL/PT/RO/SI/SK/TR/FI/SE/CH/

UK/HR. 5150MHz~5350MHz is for indoor use only.

(*1: for 2.4G WLAN model; *2: for 5G WLAN model)

This product is designed for DSL, POTS and 2.4GHz /5GHz WLAN network throughout the EC region.

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device may accept any interference received, including interference that may cause

undesired operation.

RF Exposure Warning

This equipment must be installed and operated in accordance with provided instructions and the

antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20

cm from all persons and must not be co-located or operating in conjunction with any other antenna or

iii

transmitter. End-users and installers must be provided with antenna installation instructions and

transmitter operating conditions for satisfying RF exposure compliance.

Caution

Any changes or modifications not expressly approved by the grantee of this device could void the

user's authority to operate the equipment.

The antenna/transmitter should be kept at least 20 cm away from human body.

More update, please visit www.draytek.com.

1. Package Content .................................................................................................. 1

2. Panel Explanation................................................................................................. 2

2.1 Vigor2762n, Vigor 2762ac, Vigor 2762Vac ................................................................................ 2

3. Hardware Installation ........................................................................................... 4

3.1 Network Connection................................................................................................................... 4

3.2 Wall-Mounted Installation........................................................................................................... 5

4. Software Configuration........................................................................................ 6

5. Customer Service................................................................................................11

Be a Registered Owner...................................................................................................................11

Firmware & Tools Updates..............................................................................................................11

Take a look at the package content. If there is anything missed or damaged,

please contact DrayTek or dealer immediately.

Vigor router Quick Start Guide, Antenna

RJ-45 Cable (Ethernet) RJ-11 to RJ-11 Cable (Annex A)

RJ-11 to RJ-45 Cable (Annex B) RJ-45 to RJ-45 Cable (Annex B)

The type of the power adapter depends on the country that the router will

be installed. * The maximum power consumption is 17-23 Watt.

UK-type Power Adapter EU-type Power Adapter

USA/Taiwan-type Power Adapter AU/NZ-type Power Adapter

LED Status Explanation

Blinking The router is powered on and running normally.

(Activity) Off The router is powered off.

On The phone connected to this port is off-hook.

Off The phone connected to this port is on-hook.

(for “V” model) Blinking A phone call comes.

On (Green) The wireless access point is ready.

Blinking (Green) The data is transmitting via wireless connection based

on the rate of 2.4GHz.

Blinking (Orange) Blinks with one second cycle for two minutes. The WPS

function is active.

(Wireless LAN

On/Off/WPS)

Off The wireless access point is turned off.

On (Green) The wireless access point is ready.

Blinking (Green) The data is transmitting via wireless connection based

on the rate of 5GHz.

(Wireless LAN

On/Off/WPS) Blinking (Orange) Blinks with one second cycle for two minutes. The WPS

function is active.

On A USB device is connected and active.

(USB) Blinking The data is transmitting.

On The DSL link up, waiting for the Internet connection.

Orange Blinking

Slowly - The DSL connection is ready for training.

Quickly - The DSL connection is synchronizing.

On The router is ready to access to the Internet through

DSL link.

(DSL)

Green Blinking

The data is transmitting.

On The LAN port is connected.

~ Blinking The data is transmitting.

Off The LAN port is disconnected.

Interface Description

WLAN

ON/OFF/WPS WLAN On - Press the button and release it within 2 seconds. When

the wireless function is ready, the green LED will be on.

WLAN Off - Press the button and release it within 2 seconds to turn

off the WLAN function. When the wireless function is not ready, the

LED will be off.

WPS - When WPS function is enabled by web user interface, press

this button for more than 2 seconds to wait for client’s device making

network connection through WPS.

Factory Reset Restore the default settings.

Usage: Turn on the router (ACT LED is blinking). Press the hole and

keep for more than 5 seconds. When you see the ACT LED begins to

blink rapidly than usual, release the button. Then the router will

restart with the factory default configuration.

USB1~USB2 Connector for a USB device (for 3G/4G USB Modem or printer).

GigaLAN1~LAN4 Connectors for local networked devices.

DSL Connector for accessing the Internet.

Phone2/Phone1

(for “V” model) Connector of analog phone for VoIP communication.

I / O Power Switch.

PWR Connector for a power adapter.

This section will guide you to install the router through hardware connection and

configure the router’s settings through web browser.

Before starting to configure the router, you have to connect your devices

correctly.

1. Connect the DSL interface to the land line jack with a DSL line cable.

2. Connect one port of 4-port switch to your computer with a RJ-45 cable. This

device allows you to connect 4 PCs directly.

3. Connect detachable antennas to the router.

4. Connect one end of the power cord to the power port of this device.

Connect the other end to the wall outlet of electricity.

5. Power on the router.

6. Check the ACT and DSL, LAN LEDs to assure network connection.

(For the detailed information of LED status, please refer to section 1.1.)

Note

Remove the protective film from the router before use to ensure

ventilation.

Andere Handbücher für Vigor2762 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Draytek Netzwerk-Router Handbücher

Draytek

Draytek Vigor2927 Series Bedienungsanleitung

Draytek

Draytek Vigor 2950G Referenzhandbuch

Draytek

Draytek Vigor 2132 Series Bedienungsanleitung

Draytek

Draytek VIGOR3220 SERIES Bedienungsanleitung

Draytek

Draytek Vigor 2950Gi Referenzhandbuch

Draytek

Draytek Vigor2762 series Bedienungsanleitung

Draytek

Draytek VigorFly 210 Bedienungsanleitung

Draytek

Draytek Vigor 2700 Series Bedienungsanleitung

Draytek

Draytek Vigor2760Vn Bedienungsanleitung

Draytek

Draytek VigorSwitch P1080 Bedienungsanleitung

Draytek

Draytek Vigor2710 Series Bedienungsanleitung

Draytek

Draytek Vigor2760 Delight Bedienungsanleitung

Draytek

Draytek Vigor2120n-plus Bedienungsanleitung

Draytek

Draytek VigorIPPBX 3510 Series Bedienungsanleitung

Draytek

Draytek Vigor 2930 Bedienungsanleitung

Draytek

Draytek Vigor 2800 Bedienungsanleitung

Draytek

Draytek VIGOR VIGOR2750 Bedienungsanleitung

Draytek

Draytek Vigor 2200E-Plus Referenzhandbuch

Draytek

Draytek Vigor2760 Bedienungsanleitung

Draytek

Draytek Vigor 2800i Referenzhandbuch

Draytek

Draytek Vigor2927 Series Bedienungsanleitung

Draytek

Draytek VigorIPPBX 2820 Series Bedienungsanleitung

Draytek

Draytek VigorPro 5510 Series Bedienungsanleitung

Draytek

Draytek Vigor2600 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise