Draytek Vigor3910 Series Bedienungsanleitung

Vigor3910 Series

Multi-WAN Security Router

Quick Start Guide

Version:1.2

Firmware Version: V4.3.1.1

(For future update, please visit DrayTek web site)

Date: July 20, 2022

iii

Intellectual Property Rights (IPR) Information

by copyright. No part may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language without written permission

from the copyright holders.

Trademarks The following trademarks are used in this document:

Microsoft is a registered trademark of Microsoft Corp.

Windows 8, 10, 11 and Explorer are trademarks of Microsoft Corp.

Apple and Mac OS are registered trademarks of Apple Inc.

Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety

Instructions

Read the installation guide thoroughly before you set up the router.

The router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the

router yourself.

Do not place the router in a damp or humid place, e.g. a bathroom.

Do not stack the routers.

The router should be used in a sheltered area, within a temperature

range of +5 to +40 Celsius.

Do not expose the router to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight or

heat sources.

Do not deploy the cable for LAN connection outdoor to prevent electronic

shock hazards.

Keep the package out of reach of children.

When you want to dispose of the router, please follow local regulations on

conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the router will be free

from any defects in workmanship or materials for a period of two (2) years

from the date of purchase from the dealer. Please keep your purchase receipt

in a safe place as it serves as proof of date of purchase. During the warranty

period, and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for

either parts or labor, to whatever extent we deem necessary tore-store the

product to proper operating condition. Any replacement will consist of a new

or re-manufactured functionally equivalent product of equal value, and will

be offered solely at our discretion. This warranty will not apply if the product

is modified, misused, tampered with, damaged by an act of God, or subjected

to abnormal working conditions. The warranty does not cover the bundled or

licensed software of other vendors. Defects which do not significantly affect

the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

EU Declaration of Conformity

We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole

responsibility that the product

Product name: Multi-WAN Security Appliance

Model number: Vigor3910

Manufacturer: DrayTek Corp.

Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan.

is in conformity with the relevant Union harmonisation legislation:

EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU with reference to the following standards

Standard Version / Issue date

EN 55032 2015+AC:2016 class A

EN 61000-3-2 2014 Class A

EN 61000-3-3 2013

EN 55024 2010+A1:2015

EN 62368-1 2014/AC:2015

EN IEC 63000:2018 2018

Hsinchu 22nd June, 2019 Calvin Ma / President .

(place) (date) (LegalSignature)

Declaration of Conformity

We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole

responsibility that the product

Product name: Multi-WAN Security Appliance

Model number: Vigor3910

Manufacturer: DrayTek Corp.

Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan.

Importer: CMS Distribution Ltd: Bohola Road, Kiltimagh, Co Mayo, Ireland

is in conformity with the relevant UK Statutory Instruments:

The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI

2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations

2012 (SI 2012 No. 3032) with reference to the following standards:

Standard Version / Issue date

EN 55032 2015+A1:2016 class A

EN 61000-3-2 2014

EN 61000-3-3 2013

EN 55024 2010+A1:2015

EN 62368-1 2014/AC:2015

EN IEC 63000:2018 2018

Hsinchu 2nd August, 2021 Calvin Ma / President .

(place) (date) (LegalSignature)

Regulatory Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and

(2) This device may accept any interference received, including interference that may cause

undesired operation.

More update, please visit www.draytek.com.

Company name ABP International Inc.

Address 13988 Diplomat Drive Suite 180 Dallas TX 75234

ZIP Code 75234 E-mail rmesser@abptech.com

USA Local

Representative Contact Person Mr. Robert

Messer Tel. 19728311600

1. Package Content .................................................................................................. 1

2. Panel Explanation................................................................................................. 2

2.1 LED ............................................................................................................................................ 2

2.2 Connectors................................................................................................................................. 2

3. Hardware Installation ........................................................................................... 3

3.1 Connecting Device..................................................................................................................... 3

3.2 Rack-Mounted Installation.......................................................................................................... 4

4. Software Configuration........................................................................................ 5

4.1 Quick Start Wizard for Network Connection............................................................................... 5

5. Customer Service............................................................................................... 12

Take a look at the package content. If there is anything missed or damaged,

please contact DrayTek or dealer immediately.

Vigor router Quick Start Guide

RJ-45 Cable (Ethernet) Rack mount kit (brackets)

Console Connector Console Flat Cable

The type of the power cord depends on the country that the router will be

installed.

UK-type Power Cord EU-type Power Cord

USA/Taiwan-type Power Cord AU/NZ-type Power Cord

LED Status Explanation

On The router is powered on.PWR Off The router is powered off.

Blinking The system is active.ACT Off The system is hanged.

On The USB device is installed and ready.USB Off No USB device is installed.

On The fiber connection is established.SFP+ Off No fiber connection is established or the system is

hanged.

On The Ethernet link is established on corresponding port.

Off No Ethernet link is established.

Left Blinking The data is transmitting.

On The Ethernet link is established on corresponding port

with 1G Mbps or above.

P3 ~

P12 Right Off The Ethernet link is established on corresponding port

with less than 1G Mbps.

Interface Description

USB1 / USB2 Connecter for the USB device.

Console Provided for technician use.

SFP+ (P1~P2) Connecter for SFP module with the rate of 10G/1G bps.

2.5GBase-T

(P3~P4) Connector for remote network devices or local network devices

(WAN/LAN) with the rate of 2.5G/1G/100M/10M bps.

GbE P5~P8 Connectors for remote network devices or local network devices

(WAN/LAN) with the rate of 1G/100M/10M bps.

GbE P9~P12 Connecter for local network devices (LAN) with the rate of

1G/100M/10M bps.

The Factory Reset button is used to restore the default settings.

Turn on the router (ACT LED is blinking). Press the hole and keep for

more than 5 seconds. When you see the ACT LED begins to blink

rapidly than usual, release the button. Then the router will restart

with the factory default configuration.

Connecter for a power cord.

ON/OFF - Power switch.

This section will guide you to install the router through hardware connection and

configure the router’s settings through web browser.

Before starting to configure the router, you have to connect your devices

correctly.

1. Connect a modem to any WAN port of Vigor3910 with Ethernet cable (RJ-45)

to access Internet.

2. Connect the other end of the cable (RJ-45) to the Ethernet port on your

computer (that device also can connect to other computers to form a small

area network). The LAN LED for that port on the front panel will light up.

3. Connect a server/router (depends on your requirement) to any WAN port of

Vigor3910 with Ethernet cable (RJ-45). The WAN LED will light up.

4. Connect the power cord to Vigor3910’s power port on the rear panel, and

the other side into a wall outlet.

5. Power on the device by pressing down the power switch on the rear panel.

The PWR LED should be ON.

6. The system starts to initiate. After completing the system test, the ACT LED

will light up and start blinking.

Below shows an outline of the hardware installation for your reference.

-M

The Vigor3910 Series can be mounted on the shelf by using standard brackets

shown below.

1. Fasten the rack mount kit on both sides of the Vigor router using specific

screws.

2. Then, install the Vigor router (with rack mount kit) on the 19-inch chassis by

using other four screws.

Andere Handbücher für Vigor3910 Series

Inhaltsverzeichnis

Andere Draytek Netzwerk-Router Handbücher

Draytek

Draytek Vigor 2710e Bedienungsanleitung

Draytek

Draytek Vigor2760 Bedienungsanleitung

Draytek

Draytek Vigor2920 Series Bedienungsanleitung

Draytek

Draytek VigorPro 5300 Bedienungsanleitung

Draytek

Draytek VigorSwitch P1080 Bedienungsanleitung

Draytek

Draytek Vigor 2700Ge/e Bedienungsanleitung

Draytek

Draytek Vigor2300 Einrichtungshandbuch

Draytek

Draytek Vigor 2132 Series Bedienungsanleitung

Draytek

Draytek Vigor2600VG Bedienungsanleitung

Draytek

Draytek Vigor2110 Series Bedienungsanleitung

Draytek

Draytek Vigor 3100 Series Bedienungsanleitung

Draytek

Draytek Vigor2962 Series Bedienungsanleitung

Draytek

Draytek Vigor1000 Series Bedienungsanleitung

Draytek

Draytek Vigor 2800 Bedienungsanleitung

Draytek

Draytek Vigpr2500 Bedienungsanleitung

Draytek

Draytek Vigor2760 Bedienungsanleitung

Draytek

Draytek Vigor 2200V Referenzhandbuch

Draytek

Draytek Vigor2760 Bedienungsanleitung

Draytek

Draytek Vigor2862 Series Bedienungsanleitung

Draytek

Draytek Vigor2920 Series Bedienungsanleitung

Draytek

Draytek Vigor 2200E-Plus Bedienungsanleitung

Draytek

Draytek Vigor2135 Series Bedienungsanleitung

Draytek

Draytek Vigor2130 Series Bedienungsanleitung

Draytek

Draytek VIGOR3220 SERIES Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise