Drazice OKCE 100 S/2 Technisches Datenblatt

OPERATING AND

INSTALLATION MANUAL

STATIONARY ELECTRICAL WATER HEATERS

OKCE 100 S/2,2 kW

OKCE 125 S/2,2 kW

OKCE 160 S/2,2 kW

OKCE 160 S/3-6 kW

OKCE 200 S/2,2 kW

OKCE 200 S/3-6 kW

OKCE 250 S/2,2 kW

OKCE 250 S/3-6 kW

OKCE 300 S/1 MPa

OKCE 400 S/1 MPa

OKCE 500 S/1 MPa

OKCE 750 S/1 MPa

OKCE 1000 S/1 MPa

Družstevní závody Dražice - strojírna s.r.o.

Dražice 69, 294 71 Benátky nad Jizerou

Phone.: +420 /326 370 990

Fax: +420 / 326 370 980

e-mail: prodej@dzd.cz

- 2 -

CONTENTS

1PRODUCT TECHNICAL SPECIFICATION....................................................................................................... 4

1.1 FUNCTION DESCRIPTION ................................................................................................................... 4

1.2 PRODUCT DESCRIPTION .................................................................................................................... 4

1.3 DESIGN AND GENERAL HEATER DIMENSIONS................................................................................... 5

1.4 TECHNICAL PARAMETERS................................................................................................................ 11

2OPERATION AND FITTING INSTRUCTIONS............................................................................................... 12

2.1 OPERATING CONDITIONS ................................................................................................................ 12

2.2 ELECTRICAL INSTALLATION.............................................................................................................. 12

2.2.1 ELECTRIC INSTALLATION FOR: OKCE 100 S/2.2 kW; OKCE 125 S/2.2 kW;............................... 12

2.2.2 ELECTRIC INSTALLATION FOR: OKCE 160 S/2,2 kW, OKCE 160 S/3-6 kW, OKCE 200 S/2,2 kW,

OKCE 200 S/3-6 kW, OKCE 250 S/2,2 kW, OKCE 250 S/3-6 kW, OKCE 300 S/1 MPa ,OKCE 400 S/1 MPa,

OKCE 500 S/1 MPa................................................................................................................................... 13

2.2.3 ELECTRIC INSTALLATION ONLY FOR:

OKCE 300 S/1MPa, OKCE 400 S/1MPa , OKCE 500

S/1MPa, OKCE 750 S/1MPa, OKCE 1000 S/1MPa.................................................................................... 17

2.2.4 PLUMBING FIXTURE................................................................................................................. 18

2.3 FURTHER INFORMATION................................................................................................................. 19

2.4 FIRST COMMISSIONING................................................................................................................... 20

2.5 HEATER CLEANING AND ANODE ROD EXCHANGE........................................................................... 21

2.6 SPARE PARTS.................................................................................................................................... 21

3OPERATION OF THERMOSTAT................................................................................................................. 22

3.1 SERVICING........................................................................................................................................ 22

3.1.1 OPERATION DEVICES OF THE OKCE 100-125 S/2.2 kw HEATER.............................................. 22

3.1.2 TEMPERATURE SETTING .......................................................................................................... 22

3.2 MOST FREQUENT FUNCTION FAILURES AND THEIR CAUSES .......................................................... 23

4IMPORTANT NOTICES .............................................................................................................................. 24

4.1 INSTALLATION REGULATIONS.......................................................................................................... 24

4.2 DISPOSAL OF PACKAGING MATERIAL AND NON-FUNCTIONING PRODUCT.................................... 24

5 ASSEMBLY GUIDE FOR ZIP-FASTENER INSULATION ................................................................................ 25

- 3 -

Meaning of pictograms used in the Manual

Important information for heater users.

Abiding by the recommendations of the manufacturer serves to ensure trouble-free

operation and the long service life of the product.

Caution!

Important notice to be observed.

CAREFULLY READ THIS MANUAL BEFORE INSTALLING THE WATER HEATER!

Dear Customer,

The Works Cooperative of Dražice – Machine Plant, Ltd., would

like to thank you for your decision to use a product of our

brand. With this guide, we will introduce you to the use,

construction, maintenance and other information on electrical

water heaters.

The manufacturer reserves the right for engineering modification of the product. The product is designed

for permanent contact with drinkable water.

It is recommended to use the product in indoor environment with air temperatures from +2°C to 45°C

and a relative humidity up to 80%. 80%.

Product’s reliability and safety is proven by tests implemented by the Engineering Test Institute in Brno.

- 4 -

1PRODUCT TECHNICAL SPECIFICATION

1.1 FUNCTION DESCRIPTION

OKCE line water heaters use only electricity for heating. Their nominal performance provides sufficient

amount of hot water for flat units, premises, restaurants, and similar establishments.

1.2 PRODUCT DESCRIPTION

The heater tank is welded from a steel sheet; it is entirely coated with hot water resistant enamel. For

additional corrosion protection a magnesium anode is mounted in the upper part of the heater to adjust

the electric potential inside the tank, reducing the risk of corrosion. All types have the outlets of hot and

cold water and a circulation opening welded to them. The receptacle is insulated with 40-65 mm

polyurethane foam. The heater shield consists of a steel, powder-paint coated, sheet; the connecting parts

are metal coated.

In 100-125 litre heaters, a flange is welded onto the upper bottom of the receptacle to which the lid of the

flange is screwed. A sealing ring is inserted between the flange lid and the flange.

Thermowells for placing a heating element and regulation and safety thermostat sensors and capillary

thermometer are located in the flange lid. Electric wiring is placed underneath the plastic removable cover.

Under the plastic cover in 160-250 litre heaters, there is a cleaning and revision opening ended with a

flange on the side of the heater; a heating unit of different power can be mounted in the opening. The

heater is to be placed on the ground.

Tanks between 100 and 250 litres are tested with the pressure of 0.9 MPa; 300 litre tanks are tested with

1.5 MPa.

- 5 -

TYP OKCE 100 S/2,2 kW OKCE 125 S/2,2 kW

A902 1067

B893 1058

C144 144

D524 524

L535 635

1.3 DESIGN AND GENERAL HEATER DIMENSIONS

OKCE 100 S/2.2 kW; OKCE 125 S/2.2 kW;

Figure 1

①3/4" outer

②3/4" inner

③1/2" inner

- 6 -

TYP OKCE 160 S/2,2 kW OKCE 200 S/2,2 kW OKCE 250 S/2,2 kW

A1047 1357 1537

B705 705 705

C79 79 79

D584 584 584

E519 859 1059

F966 1279 1459

G242 242 242

H524 813 813

OKCE 160 S/2,2 kW, OKCE 200 S/2,2 kW, OKCE 250 S/2,2 kW

Figure 2

①3/4" outer

②3/4" inner

③6/4" inner

- 7 -

TYP OKCE 160 S/3-6 kW OKCE 200 S/3-6 kW OKCE 250 S/3-6 kW

A1047 1357 1537

B705 705 705

C79 79 79

D584 584 584

E518 859 1059

F965 1279 1459

G289 289 289

H - 813 813

OKCE 160 S/3-6 kW

OKCE 200 S/3-6 kW, OKCE 250 S/3-6 kW

Figure 3

①3/4" outer

②3/4" inner

③6/4" inner

- 8 -

OKCE 300 S/1 MPa

Figure 4

A1578

B724

C79

D650

F756

G304

J897

①3/4" outer

②3/4" inner

③6/4" inner

- 9 -

OKCE 400 S/1MPa OKCE 500 S/1MPa

A1920 1924

B734 779

C79 55

D650 700

E514 380

F1194 1264

G304 287

H1289 1409

I1798 1790

J1005 1040

OKCE 400 S/1 MPa; OKCE 500 S/1 MPa

Figure 5

①3/4" outer

②3/4" inner

③

1/2" inner

Thermowell for

sensor

④6/4" inner

- 10 -

OKCE 750 S/1MPa OKCE 1000 S/1MPa

A2030 2050

B1030 1130

C100 100

D1 910 1010

D2 750 850

D3 225 225

E292 300

F947 955

G382 390

H1147 1155

I1893 1910

J1477 1515

L1642 1650

OKCE 750 S/1 MPa; OKCE 1,000 S/1 MPa

Figure 6

①

2" outer

②

5/4" inner

③

1/2" inner

④

5/4" outer

Andere Handbücher für OKCE 100 S/2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Drazice Boiler Handbücher

Drazice

Drazice OKC 100 NTR/HV Technisches Datenblatt

Drazice

Drazice NADO v1 Kurzanleitung

Drazice

Drazice NADO 800/35v9 Technisches Datenblatt

Drazice

Drazice OKC 300 NTR/1MPa Montageanleitung

Drazice

Drazice OKC 100 NTR Technisches Datenblatt

Drazice

Drazice OKCE 100 NTR Technisches Datenblatt

Drazice

Drazice OKC 250 NTR Technisches Datenblatt

Drazice

Drazice OKCE 125 -2/6 kW Technisches Datenblatt

Drazice

Drazice OKCE 160 NTR Technisches Datenblatt

Drazice

Drazice OKHE ONE/E 30 Technisches Datenblatt

Drazice

Drazice Okcv 200 Technisches Datenblatt

Drazice

Drazice OKC 300 NTR/1 MPa Technisches Datenblatt

Drazice

Drazice OKC 300 NTR/HP Technisches Datenblatt

Drazice

Drazice NAD 250 v1 Technisches Datenblatt

Drazice

Drazice OKC 200 NTRR/SOL Technisches Datenblatt

Drazice

Drazice OKCE 100 S/2 Technisches Datenblatt

Drazice

Drazice OKC 80 Technisches Datenblatt

Drazice

Drazice OKH 100 NTR/HV Technisches Datenblatt

Drazice

Drazice OKCE 160 NTR Technisches Datenblatt

Drazice

Drazice OKC 100 NTR Technisches Datenblatt

Drazice

Drazice Okce 100 Technisches Datenblatt

Drazice

Drazice TO 10 IN Technisches Datenblatt

Drazice

Drazice NAD 250 v1 Bedienungsanleitung

Drazice

Drazice NADO 500/200v7 Technisches Datenblatt

Beliebte Boiler Handbücher anderer Marken

Kenmore

Kenmore 153.582400 Bedienungsanleitung

Applimo

Applimo Edel AIR Bedienungsanleitung

STIEBEL ELTRON

STIEBEL ELTRON Eltronom SHU 5 S Bedienungsanleitung

clage

clage E-Mini Series Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-180 Bedienungsanleitung

Bradford White

Bradford White EF Series Bedienungsanleitung

Eccotemp

Eccotemp 40-H Bedienungsanleitung

Dimplex

Dimplex ECSd125-580 Leitfaden

Dux

Dux 32FCR6N Bedienungsanleitung

Toyotomi

Toyotomi Oil Miser OM-148 (Type D) Fehlerbehebungshandbuch

Noritz

Noritz N-132M Gebrauchsanweisung

TESY

TESY GCV7/4S 10047 Technisches Datenblatt

A.O. Smith

A.O. Smith Gphe 50 Bedienungsanleitung

Koryo

Koryo KWHZF15Y Bedienungsanleitung

Pentair

Pentair PSC-14-4-02 Bedienungsanleitung

GE 40M06AAG Montageanleitung

Thermor

Thermor AEROMAX SPLIT 2 Bedienungsanleitung

American Hometec

American Hometec AHQ-B03X Bedienungsanleitung