Dream On Me 630 Bedienungsanleitung

STYLE NO: 630

Read all instructions BEFORE assembly and USE of product.

Adult assembly required.

Small parts may present choking hazard prior to assembly.

Enclosed please find simple step-by-step instructions to help

you quickly assemble your products.Before you begin we

recommend that you following the steps below:

1.Please read the instructions thoroughly.

2. Identify all parts and hardwares

3.You will need the following tools:

Philips head screw driver

Flat head screw driver Hammer

Do Not Use Power Drills or Drivers

To protect your parts during assembly please place them on a

soft surface.

To clean surface use only water on a damp cloth. Do not use

window cleaners or cleaning abrasives as it will scratch the

surface and could damage the protective coating.

Please note that the warning sticker is placed on the cribs to keep parents and

caregivers informed it is a requirement by law under CPSC And ASTM.

We do apologize for any inconvenience this may cause you.

KEEP INSTRUCTIONS FOR FUTURE USE.

Infants can suffocate

In gaps between a mattress too small or too thick and product sides.

On soft bedding NEVER add a mattress,pillow,comforter,or padding.

The Product,including side rails,must be fully erected prior to use.

Always provide the supervision necessary for the continued safety

of your child.When used for playing,never leave child unattended.

Dream On Me Inc.

1532 S WASHINGTON AVE

PISCATAWAY TWP NJ 08854

OFFICE: 732-752-7220

CUSTOMER SERVICE: 732-366-1788

WARNING !

MADE IN CHINA

· FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS

COULD RESULT IN SERIOUS INJURY OR DEATH.

· CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING

PARTS OR SHARP EDGES BEFORE AND AFTER ASSEMBLY.A FREQUENT CHECK

DAMAGED OR BROKEN.CONTACT DREAM ON ME INC.1532 S WASHINGTON AVE

PISCATAWAY TWP NJ 08854

FOR REPLACEMENT PARTS AND INSTRUCTIONAL

LITERATURE IF NEEDED.DO NOT SUBSTITUTE PARTS.

· TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS

BE PLACED ON THEIR BACKS TO SLEEP, OTHERWISE ADVISED BY YOUR

PHYSICIAN.

· STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING

AROUND A CHILD’S

NECK,SUCH AS HOOD STRINGS OR PACIFIER CORDS.

DO NOT SUSPEND STRINGS OVER A CRIB OR ATTACH A

STRINGS TO TOYS.

· TO HELP PREVENT STRANGULATION TIGHTEN ALL FASTENERS. A CHILD CAN

TRAP PARTS OF THE BODY OR CLOTHING ON LOOSE FASTENERS.

· DO NOT PLACE CRIB NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPS

MAY STRANGLE A CHILD.

· WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO THE

LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS AND OTHER

OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.

· WHEN CHILD IS ABLE TO CLIMB OUT OR REACH THE HEIGHT OF 35 IN.(89CM),

THE CRIB SHALL NO LONGER BE USED.

· DO NOT USE A WATER MATTRESS WITH THIS CRIB.

· REPLACE TEETHING RAIL IF DAMAGED, CRACKED OR LOOSE.

· IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S

PRODUCTS.

· NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS

COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.

· INFANTS CAN SUFFOCATE IN GAPS BETWEEN CRIB SIDES AND A MATTRESS

THAT IS TOO SMALL.

· INFANTS CAN SUFFOCATE ON SOFT BEDDING,NEVER ADD A PILLOW OR

COMFORTER.NEVER PLACE ADDITIONAL PADDING UNDER AN INFANT.

· FOLLOW WARNINGS ON ALL PRODUCTS IN A CRIB. SEE HEAD PANNEL AND

MATTRESS SUPPORT FOR WARNINGS AND INSTRUCTIONS.

SHOULD BE MADE DURING USE.DO NOT USE CRIB IF ANY PARTS ARE MISSING,

USE ONLY MATTRESS/PAD PROVIDED BY DREAM ON ME WHICH MUST BE AT

LEAST 37-3/4 IN.LONG BY 23-3/4 WIDE AND NOT MORE THAN 2 IN.THICK.

READ ALL INSTRUCTIONS BEFORE USE OF THE CHANGING TABLE,ADD-ON

CHANGING UNIT,OR CONTOURED CHANGING PAD.FOR THIS CHANGING TABLE,

THE MAXIMUM WEIGHT OF THE CHILD IS 30LBS.

DO NOT USE CHANGING TABLE,ADD-ON CHANGING UNIT,OR CONTOURED

CHANGING PAD IF IT IS DAMAGED OR BROKEN.

532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854

CONNECTION HARD WARE

a: 1-1/5” Allen head

bolt (14 pcs)

b:Wood dowels (12pcs) c:Allen wrench (1pc) d:3” Allen head bolt (4pcs)

e:Barrel nuts (14 pcs) f: 3/4” Allen head bolt (4 pcs) h:1-1/5” Screw (3 pcs)

i:Knob (3pcs) j:Shelf support (4pcs)

PARTS ENCLOSED IN CARTON

A:Changer right side (1pc)

k:Washer (2pcs) l:Bolt (2pcs) m:Belt (1pc)

n:Tip over restraints (1pc)

B:Top rail (1pc)

C:Bottom bar (1pc)

Changer back Changer middle

E:Bottom bar (1pc)

D: Top bar (1pc)

g: 2-1/5”Allen head

bolt (10 pcs)

q:Bolt (1pc)

p:Cross screws (24pcs)

s. 1” Allen head Bolt (4pcs) t. Nuts (4pcs) WRENCH AND

PHILLIPS--HEAD SCREWDRIVER

REQUIRED FOR ASSEMBLY

----NOT INCLUDE

r. Metal connetion (4pcs)

R:Wooden mattress base(1pc)

Z1:Smalll pad (1pc)

Changer front bar

F: Top (1pc)

G: Middle (1pc)

H:Bottom (1pc)

I:Changing surface (1pc)

J:Changer middle panel

K:Changer bottom shelf (1pc)

L:Changer left side (1pc) M:Left back leg (1pc)

N:Left board (1pc)

O:Left front leg (1pc)

Drawer T:Front panel (3pcs)

U:Left side panel (3pcs)

V: Right side panel (3pcs)

W:Back panel (3pcs)

X:Bottom panel (3pcs)

Q:Back rail bottom (1pc) S:Front rail bottom (1pc)

Y:Changer middle shelf (1pc)

Z2:Big pad (1pc)

P:Back top rail(1pcs)

CRIB ASSEMBLY

Lay down the assembled parts on the floor .

Slide The changing surface (I) into the groove

in (D) along the groove between (B) and (G) .

Slide (J) into the groove in (A) along the groove

between (D) and (E) .

Then slide (K) into groove in (A) along the

groove between(C) and (E) .

STEP 2

Model shown is example only.

Styles may vary .

STEP 1

Attach The changer back(B&C) ,

and The changer middle(D&E) ,

and The changer front (F,G,&H)

toThe changer right side (A) using wood

dowels (b),

nuts(e) by allen

bolts (a),bolts (g) and barrel

wrench (c) .

Model shown is example only.

Styles may vary .

Attach left back leg (M) and

left front leg (O) to left board

(N) using bolts (d) and barrel

nuts (e) .

STEP 4

Model shown is example only.

Styles may vary .

STEP 3

Model shown is example only.

Styles may vary .

Attach The changer back (B&C) and

The changer middle (D&E) and The

changer front (F,G&H) to The

changer left side (L) using wood dowels

(b),bolts (a) and bolts (q) by allen

wrench (c) .

STEP 6

Model shown is example only.

Styles may vary .

STEP 5

Model shown is example only.

Styles may vary .

Attach The top rail (P) and the

bottom rail (Q) to The changer

side (L) and left headboard

using wood dowels(b),bolts(q&g)

and barrel nuts(e) by allen wrench.

q q

Attach metal connection(r) to the

wooden mattress

base(R) by using bolts(s) and nuts(t) with wrench.

Position the wooden mattress base (R) to a

Insert the bolts(f) into thread inserts on legs,

then tighten securely with Allen wrench(d).

Be sure the flat side of wooden mattress

base(R) is upward.

WRENCH- NOT INCLUDE

selected position on legs.

STEP 7

Model shown is example only.

Styles may vary .

Attach The bottom front rail (S) to The

changer side (L) and the left head board

using bolts (g),barrel nuts (e) and allen

wrench (c) .Put the mattress(Z2) into

the bed.

STEP 8

Model shown is example only.

Styles may vary .

Attach left side panel (U) & right side

panel (V) to back panel (W) by

inserting cross screw (p) into the holes

on left side panel (U) & right side panel

(V) .

DO NOT tighten all .

Inhaltsverzeichnis

Andere Dream On Me Baby- und Kleinkindmöbel Handbücher

Dream On Me

Dream On Me BRODY 5 IN 1 Bedienungsanleitung

Dream On Me

Dream On Me 646 Bedienungsanleitung

Dream On Me

Dream On Me 387 Bedienungsanleitung

Dream On Me

Dream On Me 634 Bedienungsanleitung

Dream On Me

Dream On Me 633 Bedienungsanleitung

Dream On Me

Dream On Me Zodiak Bedienungsanleitung

Dream On Me

Dream On Me 389 Bedienungsanleitung

Dream On Me

Dream On Me OSKO Bedienungsanleitung

Dream On Me

Dream On Me ZOODLE Bedienungsanleitung

Dream On Me

Dream On Me 436 Bedienungsanleitung

Dream On Me

Dream On Me Violet 7 in 1 Bedienungsanleitung

Dream On Me

Dream On Me EXPLORA Bedienungsanleitung

Dream On Me

Dream On Me 620 Bedienungsanleitung

Dream On Me

Dream On Me 645 Bedienungsanleitung

Dream On Me

Dream On Me SOHO Bedienungsanleitung

Dream On Me

Dream On Me 683 Bedienungsanleitung

Dream On Me

Dream On Me 442 Bedienungsanleitung

Dream On Me

Dream On Me 649 Bedienungsanleitung

Dream On Me

Dream On Me LITTLE STEPS Bedienungsanleitung

Dream On Me

Dream On Me Zany Bedienungsanleitung

Dream On Me

Dream On Me PLAYARD Bedienungsanleitung

Dream On Me

Dream On Me FUNTASTIC 2-IN-1 Bedienungsanleitung

Dream On Me

Dream On Me 656 Bedienungsanleitung

Dream On Me

Dream On Me Bellport Bedienungsanleitung

Beliebte Baby- und Kleinkindmöbel Handbücher anderer Marken

Mocka

Mocka Learning Tower Bedienungsanleitung

VERTBAUDET

VERTBAUDET 62003-2789 Bedienungsanleitung

Summer

Summer MY FUN POTTY Bedienungsanleitung

Grotime

Grotime Changeover Bedienungsanleitung

Fillikid

Fillikid 1221 Bedienungsanleitung

Relita

Relita loft bed ALEX Bedienungsanleitung

Joovy

Joovy Qool Bedienungsanleitung

KidKraft

KidKraft Step n Store Bedienungsanleitung

Fisher-Price

Fisher-Price L4889 Bedienungsanleitung

Germania

Germania Moon 4048.101 Bedienungsanleitung

BabyGo

BabyGo Amila Bedienungsanleitung

Fisher-Price

Fisher-Price CBV06 Bedienungsanleitung

Fisher-Price

Fisher-Price H4790 Bedienungsanleitung

Graco

Graco Dream Suite Bedienungsanleitung

Delta Childrens Products

Delta Childrens Products BB87116CR Bedienungsanleitung

Costway

Costway BB5591 Bedienungsanleitung

SAUTHON

SAUTHON UP CHENE DORE UI101A Bedienungsanleitung

Delta Children

Delta Children Classic Bedienungsanleitung