Drello Drelloscop 1020 Bedienungsanleitung
Translation of the original
operating instructions
DRELLOSCOP 1020
2 DRELLOSCOP 1020
Article no. of this documentation: 1.1020.2B001e
As of: 12.11.2012
DRELLO is used in these operating instructions as abbreviation for
DRELLO Ing. Paul Drewell GmbH & Co. KG.
No part of this publication may be duplicated, transmitted, transcribed,
stored to a memory device, translated into another language or computer
language in any way without prior written permission from DRELLO. In-
fringement of this copyright can also compromise product support from
DRELLO for this device. DRELLO reserves the right to make changes to
the product described within this manual without advanced notice. The
contents of the manual do not contain any contractual or other obligations
on the part of DRELLO and are not legally binding. This publication was
created with the utmost care. Suggestions for improvement can be sub-
mitted to DRELLO.
© DRELLO Ing. Paul Drewell GmbH & Co. KG
Andreas-Bornes-Strasse 46
D-41179 Mönchengladbach
Telephone: +49 - (0)2161 - 909 - 6
Telefax: +49 - (0)2161 - 909 - 700
Email: info@drello.de
Internet: www.drello.de
Table of Contents
DRELLOSCOP 1020 3
1General 5
1.1 Information on these operating instructions 5
1.2 Explanation of symbols 6
1.3 Warnings 7
1.4 Limitation of liability 8
1.5 Spare parts 8
2Safety 9
2.1 General 9
2.2 Responsibility of the operator 9
2.3 Staff requirements 11
2.3.1 Staff qualifications 11
2.3.2 Unauthorised persons 12
2.3.3 Instruction 12
2.4 Intended use 13
2.5 Device protection 13
2.6 Particular hazards 14
2.6.1 Danger from stroboscopic light flashes 14
3Technical specifications 15
4Description 17
4.1 Description of functions 17
4.2 Device overview 20
4.2.1 Front view 22
4.2.2 View from underneath 22
4.3 Menu structure 23
4.4 Type plate 24
5Transport, assembly and connection 25
5.1 Scope of supply 25
5.2 Available accessories 27
5.3 Unpacking 27
5.4 Storage 28
5.5 Requirements for the place of use 29
5.6 Mains operation 29
5.7 Connecting an external controller 30
Table of Contents
4 DRELLOSCOP 1020
6Operation 31
6.1 Switching the device ON/OFF 31
6.2 Operating 31
6.2.1 Selecting the operating mode 31
6.3 Further setting options for flash operation (manual control) 33
6.3.1 Setting the flash sequence display 33
6.3.2 Displaying the current flash duration 33
6.3.3 Setting the "Duration-Auto-Modus" variable flash duration 34
6.3.4 Setting the flash duration "Duration-Fix-Modus" 35
6.4 Further setting options for flash operation (external control) 36
6.4.1 Image shift (PHASE) 36
6.4.2 Setting the slow-motion function 37
7Maintenance and repair 38
7.1 Maintenance 38
7.2 Changing the batteries 38
7.3 Cleaning 39
7.4 Troubleshooting 39
7.5 Repairs 40
7.6 Disposal 40
General
DRELLOSCOP 1020 5
1 General
1.1 Information on these operating instructions
These operating instructions contain important instructions on han-
dling the DRELLOSCOP 1020 LED hand-held stroboscope, here-
inafter referred to as the device, during installation, operation,
maintenance and care as well as disposal.
The requirement for safe, proper and economic work on and with
the device is compliance with all specified safety and handling in-
structions.
Compliance helps to avoid danger, minimise repair costs and
downtimes and increase the reliability and the service life of the de-
vice.
In addition, local accident prevention regulations and general safety
rules for the location of the device must be complied with.
Read the operating instructions carefully before beginning any
work! They are part of the product and must be kept in the immedi-
ate vicinity of the device and be accessible to operating staff at all
times.
General
6 DRELLOSCOP 1020
1.2 Explanation of symbols
All warnings in these operating instructions are also indicated by a
warning symbol.
The following warning symbols are used throughout these operat-
ing instructions:
Symbol Meaning
General warning
Danger of electric current
General instructions and useful suggestions on
handling
Note on observing environmental regulations
for disposal
General
DRELLOSCOP 1020 7
1.3 Warnings
The warnings used in these operation instructions are indicated by
signal words that are intended to indicate the extent of the danger.
The warning symbol also indicates the type of danger.
The following warning symbols are used throughout these operat-
ing instructions:
WARNING
Risk of injury!
Consequences of failure to observe...
►Instructions for avoiding
A warning of this category indicates a potentially dangerous situa-
tion. If the dangerous situation is not avoided, it may lead to serious
injury or even death.
Follow the instructions in this warning to avoid possible danger of
serious injury or even death.
CAUTION
Damage to property by...
Consequences of failure to observe...
►Instructions for avoiding
This warning level indicates potential damage to property. If the sit-
uation is not avoided, it may lead to damage to property.
Follow the instructions in this warning to avoid material damage.
NOTE
Descriptive text…
A descriptive text contains additional information that is important
for further processing or for simplifying the procedure step ex-
plained.
General
8 DRELLOSCOP 1020
1.4 Limitation of liability
The manufacturer assumes no liability for damage and operational
faults resulting from:
■failure to observe these operating instructions,
■use for other than the intended purpose,
■deployment of non-trained or insufficiently-trained staff,
■use of non-approved equipment,
■faulty connection,
■previous work that is not part of the scope of supply,
■failure to use original replacement and accessory parts,
■technical modifications and changes not approved by DRELLO,
■failure to perform prescribed maintenance work.
With the exception of further claims, DRELLO is liable for any er-
rors or omissions within the framework of the warranty obligations
stated in the contract.
Claims for damage are excluded irrespective of the legal basis.
1.5 Spare parts
WARNING
Danger of injury due to wrong or faulty spare
parts!
Incorrect or faulty replacement parts can lead to
damage, malfunction or total breakdown of the
equipment as well endangering the safety.
►Use only the original spare parts of
the manufacturer.
Safety
DRELLOSCOP 1020 9
2 Safety
2.1 General
This section provides important instructions on all safety aspects
for optimum protection of staff as well as safe and smooth opera-
tion.
WARNING
Danger from failure to observe the safety in-
structions!
Failure to observe the safety and handling instruc-
tions listed in these operating instructions can lead
to considerable danger.
►Always pay attention to all warnings and instruc-
tions specified here.
2.2 Responsibility of the operator
Since this device is used in the commercial sector, the operator is
subject to the legal requirements for occupational safety.
In addition to the occupational safety instructions in these operating
instructions, the current safety, accident prevention and environ-
mental protection regulations relevant for operation of the device
must be complied with.
The operator must
■be informed on the current industrial safety regulations and con-
duct risk assessment to determine additional hazards specific to
the device that result from the special work conditions at its loca-
tion. These must be implemented in the form of instructions for
the operation of the device.
■continually check during the entire period of service that all oper-
ating instructions created by him comply with current regulations
and to modify them if necessary.
■clearly regulate and determine the responsibilities of the staff for
installation, operation, maintenance and cleaning
Safety
10 DRELLOSCOP 1020
■ensure that all persons handling the device have read and under-
stood these operating instructions. In addition, he must ensure
that persons are regularly trained and informed on all hazards
when using the device.
■check that staff observes the operating instructions and is aware
of safety and danger while working with the device.
■ensure that these operating instructions and all additional regula-
tions can be accessed by operating and maintenance staff.
■determine a person responsible for the device and allow him to
reject instructions from third parties that are prejudicial to safety!
■make the necessary protective equipment available to staff.
The operator is also responsible that the device is always in perfect
condition and the following therefore applies:
■The operator must ensure that the cleaning and maintenance in-
tervals stated in these operating instructions are adhered to.
Inhaltsverzeichnis
