Drive DeVilbiss 123S Bedienungsanleitung

Introduction

The Drive DeVilbiss Bed Support Rail is height

adjustable and robust. The support base slides

between the mattress and the bed frame. The

vertical bar rests against the mattress edge to

provide a side supporting hand rail.

It includes an adjustable strap which can be used

fasten the rail to the bed if required.

Assembly - Bed Support

a. Pull the ‘E’ clips (2) out of the Support Rail

(3).

b. Slide the Support Rail (3) in to the holes in

the Base (1).

c. Reinsert the ‘E’ clips (2) in to the Support

Rail.

d. If required, attach the strap to the base (4).

Then secure the base to bed base,

following the instructions (right).

e. Adjust the handle height (see overleaf) to

suit the user and mattress.

Assembly - Bed Support Strap

a. Remove the mattress from the bed.

b. Place the bed support on the bed base

in the required position.

C. Adjust the strap to its longest position

and wrap the strap around the

underside of the bed base. Continue to

wrap the strap over the top of the bed

base, ensuring the strap goes over the

top of the bed support also.

D. Lock the two ends of the strap together

and shorten the strap so that it is taut.

E. Place the mattress back on top of the

bed and check so see that the bed

support is secure.

Support Rail with Strap

User Instructions

Ref: 123S

1Cleaning

The Support Rail can be cleaned down with a

damp cloth using mild detergent and/or

disinfectant. For example, a mild chloride

disinfectant (solution of 1000 parts per million)

can be used. Excess water should be removed

using a towel and the components then

allowed to fully dry in a suitable environment.

The straps should be removed and hand

washed.

Height Adjustment

The Bed Support has two height settings (shown

below).

To use the

highest setting

(right), ensure

the receivers on

the support

base (1) are

pointing up

Safety and Usage Guidelines

1. When ﬁtting a Bed Support a risk

assessment should be carried out as to

the suitable of theequipment for the

user, with particular emphasis on the

possibility of entrapment. All areas of

the bed rail have either gap width or depth

less than 120mm with the mattress installed

and compressed with the patient weight.

2. If height adjustment has to be made,

ensure that there is no gap between the

‘E’ clip and frame. The spindle of the ‘E’

clip should fully go through the frame.

3. Ensure the Base Support is ﬁrmly

pushed right under the mattress and

the vertical bed rests against the

mattress edge.

4. The Base Support must rest in a

horizontal position and its position

must be checked regularly in line with

the ﬁndings of the original risk

assessment.

5. Do not exceed leverage of 22 stone

(140kg).

6. To comply with recommended trapping

area dimensions, the rail is not

recommended for any mattresses less

than 125mm (5”) thickness.

Warranty

The Bed Support Rail is covered by a one-

year warranty from date of purchase to

cover manufacturing and design defects. It

does not cover accidental damage, wear

and tear, etc.

See your Drive DeVilbiss Dealer for a copy of

the fully warranty terms and conditions.

This does not aﬀect your statutory rights.

Manufacturer Details

Drive DeVilbiss Healthcare Ltd,

Heathﬁeld Lane, Birkenshaw,

West Yorkshire,

GB BD11 2HW.

To prevent entrapment, there should be no

gaps more than 120mm in size.

To use the

lowest setting

(right), ensure

the receivers on

the support

base (1) are

pointing down

Issued Jan 20

To comply with recommended trapping

area dimensions, the rail is not

recommended for any mattresses less

than 125mm (5”) thickness.

Andere Drive DeVilbiss Medizinische Geräte Handbücher

Drive DeVilbiss

Drive DeVilbiss HbO-3000 Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss iGo 2 Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss 1025 Series Handbuch

Drive DeVilbiss

Drive DeVilbiss sidhil Innov8 Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss BONSAI VELOCITY Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss Sidhil 1006100001 Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss Selectis Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss Casalift 18001 Bedienungsanleitung

Drive DeVilbiss

Drive DeVilbiss Med Aire FlexWave Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung