DRIVEN Front Stand Bedienungsanleitung
Front Stand
Instruction Manual
Read and follow instructions. Failure to follow instructions could result in serious injury
and damage to your bike. Driven Racing and its Dealers cannot assume any responsibility
for damages caused by improper installation or unintended use.
DISCLAIMER:
1. Remove box content. Make sure all parts pictured are included.
2. Use Blue Loctite on the screw
3. Install handle to stand using the 4 screws. 2 screws on each side of the handle
*Front stand can only be used in conjunction with
Rear Stand. Locate lifter under the fork and brake
caliper mount. Lower the stand and lift the bike.
Warning:
1. Do not sit on bike while on stand
2. Do not run the engine while the bike is on the stand.
3. Do not run the gears while the bike is on the stand
www.drivenracing.com
4. Insert the V shape lifters and put the star knob to lock it
Read and follow instructions. Failure to follow instructions could result in serious
injury and damage to your bike. Driven Racing and its Dealers cannot assume any
responsibility for damages caused by improper installation or unintended use.
DISCLAIMER:
Andere DRIVEN Fahrradzubehör Handbücher
Beliebte Fahrradzubehör Handbücher anderer Marken
Sigma
Sigma BC 16.16 Bedienungsanleitung
Playcore
Playcore Dero Setbacks Bedienungsanleitung
VDO Cyclecomputing
VDO Cyclecomputing x3dw Bedienungsanleitung
Cateye
Cateye RAPID X2 Bedienungsanleitung
buratti meccanica
buratti meccanica Clorofilla Trail Bedienungsanleitung
Shimano
Shimano SG-8R20 Betriebsanleitung
