DSC ALEXOR PC9155 Bedienungsanleitung

PANELS, KEYPADS & MODULES

Contact your DSC distributor

www.dsc.com

1-888-888-7838

+1-905-760-3000

Quick-Start Installation Guide

1. Remove Face Plate from ALEXOR Wireless Panel

To remove the face plate, insert a small screwdriver into the 2 slots located at the

bottom.

2. Run the Power

Run AC wire and phone line through wire channel, into ALEXOR casing and wire into

terminal blocks as indicated.

3. Attach the Panel Cabinet

Mark mounting holes on wall and mount with screws provided.

4. Connect the Battery and Power It Up

Connect battery and connect face to back plate.

Provide AC to ALEXOR by plugging in the transformer

Wireless Panel & WT5500 Keypad

Just a few short steps will help you

simplify your installation process & get

you on your way to your next install

PN 29007566 R001

For product information

www.dsc.com

Product speciﬁcations and availability subject to

change without notice. Certain product names

mentioned herein may be trade names and/or

registered trademarks of other companies.

©2009 2009-03

PANELS, KEYPADS & MODULES

5. Power Up the WT5500 Keypad

Remove the mounting bracket from the keypad and insert batteries.

6. Enroll the Keypad and Wireless Devices into the Panel

Press star (*) and 1 to enroll. This must take place within the ﬁrst two minutes of

powering up ALEXOR. Keypad will display “WFKP Enrollment Successful”message.

To enroll wireless devices, use the quick enroll feature found within installers

programming section [898].

8. Program ALEXOR

Perform template programming found in section [899]. Enter the 4 digit code which

represents the functions required for basic operation through template programming.

Code prompts exist for pre-deﬁned zone deﬁnitions, reporting code formats,

communication call directions, and DLS setup. Once all codes have been programmed,

you will be prompted to enter the monitoring station phone number and account code,

DLS access code, entry and exit delays, and installer code.

Quick-Start Installation Guide

7. Mount the Keypad onto the Wall

Using the screws provided, mount the keypad bracket onto the wall.

Set keypad onto the wall bracket and snap into place.

9. Perform Placement Testing

The proposed placement of each wireless device should be tested before it is mounted

by entering section [904]-[906]. Testing the signal strength between ALEXOR and

wireless devices can be accomplished in a group (global placement test) or individually.

Installation Complete!

Wireless Panel & WT5500 Keypad

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere DSC Bedienfeld Handbücher

DSC

DSC Power632 Bedienungsanleitung

DSC

DSC CFP-102 Bedienungsanleitung

DSC

DSC LCD 5500 Bedienungsanleitung

DSC

DSC PowerSeries PC1616 Bedienungsanleitung

DSC

DSC MAXSYS PC4020 Bedienungsanleitung

DSC

DSC PC3OOO Bedienungsanleitung

DSC

DSC PowerSeries PC1616 Bedienungsanleitung

DSC

DSC Power Series PC1616 Bedienungsanleitung

DSC

DSC PC2585 Bedienungsanleitung

DSC

DSC PC550 Bedienungsanleitung

DSC

DSC PowerSeries PC1616 Bedienungsanleitung

DSC

DSC CFP-102 Bedienungsanleitung

DSC

DSC PowerSeries PC1616 Bedienungsanleitung

DSC

DSC PC560 Bedienungsanleitung

DSC

DSC Envoy NT9010DMK Bedienungsanleitung

DSC

DSC AFD2000 Bedienungsanleitung

DSC

DSC PC4020 - 2 Bedienungsanleitung

DSC

DSC MAXSYS PC4020NK Benutzerhandbuch

DSC

DSC PC2550 Bedienungsanleitung

DSC

DSC WP8010 Montageanleitung

DSC

DSC Power632 DSCPC1555RKW Bedienungsanleitung

DSC

DSC PC2000 Bedienungsanleitung

DSC

DSC CLASSIC PC1555 Bedienungsanleitung

DSC

DSC PowerSeries PC1616 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten