DuraLabel 9000 Bedienungsanleitung

Graphic Products, Inc. |800.788.5572

DuraLabel.com |GraphicProducts.com

QUICKSTART GUIDE

9000

Minimum System Requirements

Operating System: Windows 2000 SP4, XP SP2, Vista, 7

Memory: 128 MB RAM

Hard Drive: 100 MB

Additional Requirements: IT Administrator privileges

DuraLabel.com 800.788.5572

CONTENTS

Contents

1.Introduction.....................................................2

2.EquipmentChecklist .............................................3

3.LoadingthePrinter...............................................4

3.1LoadingVinylSupply............................................4

3.2LoadingRibbon................................................7

4.ConnectingthePrinter............................................8

4.1UpgradingaDriver..............................................9

4.2. Installing DuraLabel 9000 Software Using a USB Cable. . . . . . . . . . . . . . . 9

4.3. Installing DuraLabel 9000 Software Using a Parallel Cable . . . . . . . . . . .10

5. Conguring Printer Drivers .......................................12

5.1 Continuous Vinyl Printing Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

5.2 Die-cut Label Printing Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

5.3 B Mark Label Printing Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

6. Installing DuraSuite Labeling Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

DuraLabel.com 800.788.5572

INTRODUCTION

1. Introduction

Congratulations on the purchase of your DuraLabel®9000 Printer. This

QuickStart Guide explains how to set up your printer, load supplies and print

labels. It’s designed to get you printing as quickly as possible.

The DuraSuite Labeling Software included with your printer expands your

creative capabilities, simplifies safety compliance and lets you produce

professional-quality labeling for virtually any application*. You’ll be printing arc

flash, NFPA, right-to-know, GHS and custom labels in no time!

Call us at 800.788.5572 if you have any questions about your new DuraLabel

9000 Printer. We’re here to help!

*Refer to the DuraSuite User’s Guide for complete information.

EQUIPMENT CHECKLIST

DuraLabel.com 800.788.5572

2. Equipment Checklist

PACKAGE CONTENTS

DuraLabel 9000 Printer

DuraLabel 9000 Installation CD

DuraSuite Labeling Software Installation CD

DuraLabel 9000 QuickStart Guide and User’s Guide

Power Cord

USB Cable

Supply Guides (2)

Ribbon Supply Core

Ribbon Guides with Screws (2)

If anything is missing, please call your Graphic Products representative at

800.788.5572.

DuraLabel.com 800.788.5572

LOADING THE PRINTER

3. Loading the Printer

DuraLabel ribbon and vinyl supplies have been optimized for compatibility and

print quality. Only authorized DuraLabel supplies from Graphic Products will

print correctly with the DuraLabel 9000 Printer.

3.1 Loading Vinyl Supply

Always turn the power OFF when loading supplies. Always wait at

least 5 seconds before turning power back ON.

A. Open the printer cover by lifting up on the handle on the right side.

B. Push the green print head release lever to pop up the print head mechanism.

C. Remove and set aside the outside supply guide from the supply bar (Fig. 2).

D. Adjust the inside supply guide to cover the number corresponding to the size

of label supply being loaded (Fig. 3).

Print Head

Mechanism

Print Head

Release Lever

Print Head

FIGURE 1

DuraLabel.com 800.788.5572

LOADING THE PRINTER

Printer Cover

Supply Guide

FIGURE 2

Supply Bar

E. Place the label supply onto the supply

bar.

NOTE: Label supply should roll over the

top and toward the front of the printer.

F. Fit the supply guide onto the label bar,

against the vinyl supply but with enough

room for the supply to rotate easily.

FIGURE 3 The inside supply guide is set for 6"

vinyl supply/media.

Supply Guides

Supply Bar

Vinyl Supply/Media

FIGURE 4

DuraLabel.com 800.788.5572

LOADING THE PRINTER

G. Pull the leading edge of the label supply and thread it under the media guide

bar and through the adjustable media guides.

H. Pull the vinyl supply over the black platen roller and through the printed label

opening.

NOTE: Make sure the label supply threads under the green media sensor,

located under the print head.

I. Move the adjustable media guides to fit the width of the vinyl supply,

securing the vinyl in place.

FIGURE 5

Printed

Label

Opening

Adjustable

Media Guides

Platen

Roller

Print Head

Mechanism

Supply

Guides

Supply Bar

Media

Guide Bar

Media Sensor

Printed Label

Opening

Adjustable

Label Guides

FIGURE 6

DuraLabel.com 800.788.5572

LOADING THE PRINTER

3.2 Loading Ribbon

Always turn the printer OFF when loading supplies. Always wait at

least 5 seconds before turning power back ON.

A. Set ribbon guides based on loaded ribbon size.

a. For 4.33" ribbon, move

each ribbon guide to the

line indicated on the

ribbon spindle and

tighten the screw on the

top of each ribbon guide.

b. For 8.66" ribbon, move the ribbon guides against the inside printer wall.

FIGURE 1 Guides for 4.33" ribbon

FIGURE 2 Guides for 8.66" ribbon

B. Slide an empty supply core onto the front ribbon rewind spindle, flush against

the ribbon guide.

C. Slide a roll of ribbon supply onto the ribbon spindle, flush against the ribbon

guide, with the leading edge hanging down toward the back of the printer.

D. Pull the ribbon supply back, then down and thread it underneath the print

head mechanism and above the ribbon sensor (black bar above the green

media sensor).

Media Sensor Ribbon Sensor

Print Head Mechanism

Ribbon Spindle (back)

Ribbon Rewind Spindle (front)

FIGURE 3

DuraLabel.com 800.788.5572

CONNECTING THE PRINTER

E. Tape the end of the ribbon supply

to the front of the empty supply

core.

F. Roll the ribbon rewind spindle

(front spindle) clockwise a few times, toward

the back of the printer to tighten the ribbon

and remove flaws and fingerprints.

G. Press down to close, with a hand on each

side of the print head mechanism.

NOTE: Make sure the print head release lever

latches closed.

FIGURE 4

Ribbon Spindle

Ribbon Rewind

Spindle

Print Head Mechanism

Print Head Release Lever

FIGURE 5

H. Close the printer cover.

I. Turn the printer ON.

4. Connecting the Printer

A. Connect the power supply.

B. Connect the DuraLabel 9000 to your PC using a USB or parallel cable.

C. Turn on the DuraLabel 9000.

D. If using a USB cable, follow instructions in Section 4.2, Using a USB Cable.

E. If using a parallel cable, follow instructions in Section 4.3, Using a Parallel

Cable.

Andere Handbücher für 9000

Inhaltsverzeichnis

Andere DuraLabel Drucker Handbücher

DuraLabel

DuraLabel 9000 Bedienungsanleitung

DuraLabel

DuraLabel PRO Bedienungsanleitung

DuraLabel

DuraLabel Bronco Bedienungsanleitung

DuraLabel

DuraLabel 9000 Bedienungsanleitung

DuraLabel

DuraLabel Toro Bedienungsanleitung

DuraLabel

DuraLabel Catalyst Bedienungsanleitung

DuraLabel

DuraLabel Toro Bedienungsanleitung

DuraLabel

DuraLabel 9000 Bedienungsanleitung

DuraLabel

DuraLabel Toro Bedienungsanleitung

DuraLabel

DuraLabel PRO 300 Bedienungsanleitung

DuraLabel

DuraLabel 900 Bedienungsanleitung

DuraLabel

DuraLabel 4 TTP Bedienungsanleitung

DuraLabel

DuraLabel Toro Bedienungsanleitung

DuraLabel

DuraLabel 9000 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Canon

Canon CLBR 460ps Bedienungsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

Canon

Canon imagePASS-A2 Bedienungsanleitung

Canon

Canon S820D Bedienungsanleitung