Dynabrade Dynorbital EXTREME X31V Bedienungsanleitung

Andere Dynabrade Sander Handbücher

Dynabrade

Dynabrade 57400 Bedienungsanleitung

Dynabrade

Dynabrade 10725 Bedienungsanleitung

Dynabrade

Dynabrade Dynabug 57860 Bedienungsanleitung

Dynabrade

Dynabrade Dynabug 10278 Leitfaden

Dynabrade

Dynabrade 51350 Montageanleitung

Dynabrade

Dynabrade 57550 Bedienungsanleitung

Dynabrade

Dynabrade 52900 Betriebsanleitung

Dynabrade

Dynabrade 51602 Bedienungsanleitung

Dynabrade

Dynabrade 50371 Montageanleitung

Dynabrade

Dynabrade 53270 Leitfaden

Dynabrade

Dynabrade 59302 Betriebsanleitung

Dynabrade

Dynabrade 51820 Bedienungsanleitung

Dynabrade

Dynabrade 47820 Installationsanleitung

Dynabrade

Dynabrade 5700 Bedienungsanleitung

Dynabrade

Dynabrade 51830 Bedienungsanleitung

Dynabrade

Dynabrade 51570 Leitfaden

Dynabrade

Dynabrade Autobrade Red 18180 Benutzerhandbuch

Dynabrade

Dynabrade 58611 Leitfaden

Dynabrade

Dynabrade 52631 Bedienungsanleitung

Dynabrade

Dynabrade 51520 Kurzanleitung

Dynabrade

Dynabrade 51612 Leitfaden

Dynabrade

Dynabrade 10787 Leitfaden

Dynabrade

Dynabrade Dynafile II 40500 Kurzanleitung

Dynabrade

Dynabrade 10710 Bedienungsanleitung

Beliebte Sander Handbücher anderer Marken

Oliver

Oliver 6305 Bedienungsanleitung

Jet

Jet 22-44 Pro-3 Service-Handbuch

Makita

Makita M9204 Handbuch

Makita

Makita M9204 Bedienungsanleitung

Clarke

Clarke Woodworker CBS1-5B Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP9778 Bedienungsanleitung

Nitto Kohki

Nitto Kohki BB-20 Bedienungsanleitung

Ferm

Ferm FEOS-135 Bedienungsanleitung

Unior

Unior 1510 Bedienungsanleitung

stayer

stayer ls1200 Bedienungsanleitung

Jet

Jet JSG-96 Service-Handbuch

Parkside

Parkside PDS 290 B2 Bedienungsanleitung

Status

Status XPA Series Bedienungsanleitung

Clarke

Clarke EZ Sand Bedienungsanleitung

Craftsman

Craftsman 113.22521 Bedienungsanleitung

Craftsman

Craftsman 113.225831 Bedienungsanleitung

CLAS

CLAS OP 1429 Bedienungsanleitung

Parkside

Parkside PEXS 270 Al Bedienungsanleitung

Disassembly Instructions – Mini Vacuum Dynorbital EXTREME

Models: X31V

Important: Disconnect sander from the air supply.

Notice: Use these instructions along with the tool manual. To avoid damage, use the

special repair tools designed for motor disassembly and assembly. Position 57092

Repair Collar around the housing. Fasten sander in vise with sanding pad facing up.

Do not over tighten sander in vise. Use 95263 Wrench (17 mm) to hold the balancer

shaft stationary.

To remove sanding pad, turn counterclockwise.

Motor Disassembly:

1. Use 56061 Lock Ring Wrench to remove 59415 Lock Ring.

 Turn counterclockwise.

2. Remove motor from housing.

 Remove 01024 O-Ring from 59412 Cylinder Sleeve Adapter.

 Remove lock ring 59415 from motor assembly

3. Fasten 96346 Bearing Separator (2") around 59411 Cylinder Sleeve. Place

bearing separator and motor in 96232 Arbor Press (#2) with counterweight

pointing down.

 Use arbor press and 5/16" or 8 mm diameter flat-end drive punch to push shaft

out of 01139 Bearing.

 Remove 59411 Cylinder Sleeve & 59412 Cylinder Sleeve Adaptor

4. Use 96214 Bearing Removal Tool to remove 01139 Bearing from 59405 Rear

Bearing Plate.

5. Remove vanes, rotor and key.

6. Use bearing separator and arbor press to remove the front bearing plate.

7. Fasten bearing separator between 58368 Bearing and the counterweight.

 Place bearing separator in arbor press with counterweight pointing down.

 Push shaft balancer from 58368 Bearing.

Motor disassembly completed.

Balancer Shaft and Bearing Disassembly:

1. Fasten counterweight in vise with hex of 59406 Balancer Shaft pointing up.

 Use a thin slot-blade screwdriver as a pick to remove 95613 Snap Ring.

(Next three views.)