Dynaudio DM Bedienungsanleitung

Dynaudio DM

Owners Manual/Bedienungsanleitung

Home Systems I Professional I Automotive I Multimedia

Dynaudio DM

Contents

Introduction..................................................................1

Safety Instructions ......................................................2

About this guide ..........................................................2

Used expressions and symbols...............................2

Connecting ...................................................................3

Connecting the loudspeakers..................................3

Connecting surround speakers ...............................4

Positioning ...................................................................5

General recommendations ......................................5

Distance to back and side walls ..............................6

Adapting the bass reflex port...................................6

Compact loudspeaker set-up ..................................7

Loudspeaker Toe-In ................................................8

Room and furniture influence ..................................8

Grille........................................................................8

Multi-Channel Setup ....................................................9

Running-in / Care & Maintenance ............................10

Warranty .....................................................................12

Technical Specifications...........................................25

Inhaltsverzeichnis

Einleitung................................................................... 13

Sicherheitshinweise.................................................. 14

Zu dieser Anleitung................................................... 14

Verwendete Begriffe und Symbole ....................... 14

Anschließen............................................................... 15

Lautsprecher anschließen .................................... 15

Surround-Lautsprecher anschließen .................... 16

Aufstellen................................................................... 17

Allgemeine Empfehlungen.................................... 17

Abstand zu Rückwand und Seitenwänden ........... 18

Die Basswiedergabe anpassen ............................ 18

Kompaktlautsprecher aufstellen ........................... 19

Auf den Hörplatz ausrichten ................................ 20

Wohnraumeinrichtung........................................... 20

Frontabdeckung.................................................... 20

Mehrkanal-Anlage ..................................................... 21

Inbetriebnahme / Pflegehinweise ............................ 22

Garantie ..................................................................... 24

Technische Daten ..................................................... 25

Dynaudio DM 1

Introduction

English Introduction

Dear Music Lover,

Thank you for your decision to acquire Dynaudio DM loudspeakers.

Every DM model features the advanced Dynaudio loudspeaker technology, resulting in

music reproduction at a very high level, making many familiar recordings a new listening

experience altogether. This advanced technology results from many years of intense

research and development, the highest quality standards in production, and Dynaudio's

enduring passion for musical truth.

Dynaudio is one of very few companies who can realize such loudspeaker concepts

through it's own in-house development and production facilities. These facilities are so

advanced and the quality control is so strict that Dynaudio is likely the only specialty audio

company to have exceeded ISO 9000 and earned QS 9000 certification.

Each DM loudspeaker is constructed by the Dynaudio loudspeaker specialists in

Denmark to these high standards of quality. To realize the highest sound quality from the

DM models, some areas should be addressed, as will be explored on the following pages.

By considering the tips and suggestions, you will achieve the maximum performance and

enjoyment of the DM loudspeakers and their advanced musical capabilities for a long time

to come.

We wish you many years of enjoyment experiencing music,

Dynaudio

2Dynaudio DM

Safety Instructions

About this guide

Used expressions and symbols

In this operating manual following signs and symbols are used:

CAUTION HIGH SOUND PRESSURE LEVELS

Listening to high sound pressure levels over a longer period of time may harm your

hearing.

XTo avoid auditory effect do not listen to high sound levels over a longer period of time.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

CAUTION Indicates (in combination with a safety sign) a potentially hazardous situation which, if

not avoided, could result in minor or moderate injury or damage to equipment.

Note Additional information is provided, which is important to fully understand the

DM and how to operate it.

XThe arrow will identify steps to be performed. Please follow the instructions carefully.

Multiple steps that should be performed consecutively are numbered.

Please follow these instructions carefully.

Dynaudio DM 3

Connecting

Connecting the loudspeakers

1. Connect a two-pole (+/-) loudspeaker cable to the binding posts, located at rear of the

cabinet (see Fig. 1). The high quality, gold plated binding posts can accommodate

different connection systems:

–4.0 mm banana plugs: The pins can be put directly into the binding post without

any tightening necessary.

–Cable spades: Un-tighten the binding posts, insert the spade into the opening, and

secure the spade by tightening the posts.

–Bare wires: Un-tighten the binding posts and place the cable into the binding

posts. Tighten the posts.

Note: • With every connection system, ensure that the contact is tight and has a

proper contact area.

• Connectors with similar gold plating as the DM binding posts will typically offer

the best results and remain corrosion-free.

• Please ensure that the positive and negative cables do not make contact with

each other.

• Tighten the posts, and check the contact after a few days to make sure that it

hasn’t loosened.

Fig. 1 Binding posts at rear of cabinet.

4Dynaudio DM

Connecting

2. Connect the other cable ends to the loudspeaker outputs of your switched off power

amp (see Fig. 2).

Note: Please make sure that the red marked post of the speaker is connected to the red

marked output of the amp (+), and the white or black marked post to the white or

black marked output (–) accordingly.

Bi-wiring/bi-amping

Dynaudio loudspeakers feature a carefully fine-tuned cross-over, optimized using

selected parts and an advanced circuitry to achieve a truly balanced and smooth

frequency response. Therefore, dividing the frequency sections through bi-wiring or

bi-amping is neither beneficial nor optional.

Choice of loudspeaker cable

The impact a loudspeaker cable can have on sound quality may be dramatic, though in

general quality cable products will yield a quality result.

Dynaudio loudspeakers are designed to be very neutral and thus are not extremely suited

to any particular type of cable. The choice of cable is as much a factor of matching the

cable to the entire audio system. One good option is the Dynaudio Ocos constant

impedance loudspeaker cable, which is also designed to be extremely neutral. Please

consult your Dynaudio dealer for information about compatible loudspeaker cables that

will suit both your electronics and the DM loudspeakers.

Connecting surround speakers

When connecting a two-channel stereo system, only the right and left channels are

connected to the amplifier. In a surround set-up, center, side or rear loudspeakers as well

as a subwoofer are typically connected to provide for a multi-channel listening experience.

Please refer to the amplifier’s owner manual for particular connection instructions and see

chapter “Multi-Channel Setup” on page 9 for further help.

Fig. 2 Amplifier loudspeaker outputs (example).

Dynaudio DM 5

Positioning

Note: To maintain the quality of the DM loudspeakers for the long term, placing such in

very warm, very cold, very humid environments and the exposure to direct

sunlight should be avoided.

The DM range consists of classic bass reflex loudspeaker designs with no unusual or

extraordinary positioning demands. Every room will still have its own particular sound

characteristics. Any room is also shaped and decorated uniquely, and therefore remains

independent regarding options for positioning loudspeakers. The following steps are

general suggestions that will make the correct positioning easier to achieve.

General recommendations

Following explanations refer to Fig. 3:

• The distance between each loudspeaker and your listening position should be the

same (B). Try to achieve an isosceles triangle.

• The distance between the loudspeakers should be the same or better slightly less

than the distance between each loudspeakers and your listening position (A, B).

• The closer the listening position is in relation to the loudspeakers, the closer the

speakers can be positioned to each other.

• As a starting point, it is recommended that the speakers be about 2 meters apart from

each other for the best results (A).

• If the speakers are positioned too close to each other, the stereo image will not seem

realistic; if that distance is too wide, the image may leave an acoustic hole in the

middle.

• Paying attention to the image during listening tests will help dictate optimum

placement during experimentation and set-up.

Fig. 3 Positioning the loudspeakers.

A≤B

6Dynaudio DM

Positioning

Distance to back and side walls

Every loudspeaker not only disperses sound energy directly into the room, but also to the

side and even backwards. As a result, time-delayed reflections occur and add to the

original music signal. Thus, when loudspeakers are positioned too close to walls, the

sound quality can be restricted.

The DM models were developed to be placed free-standing, and therefore they reach

their optimum performance when positioned as clear of any walls as possible.

XTo reduce possible influences from the back and sidewalls, the distance to these

boundaries should ideally not be less than 0.5 meter.

Adapting the bass reflex port

To minimize low frequency reflections, which will be heard as a thickening of the sound,

the DM models can be adapted to the room’s acoustic character by using foam plugs in

the bass reflex port. This will essentially attenuate the room-induced boost in the low

frequency range by dampening the deep frequencies, yielding a more clear and tight

sound and minimized backwave reflections when the loudspeaker is positioned near rear

walls.

XFully insert the foam port plugs packed with your loudspeaker into the bass reflex tube,

to attenuate the bass output (if required).

D≥0.5m

Fig. 4 Distance to walls.

Dynaudio DM 7

Positioning

Compact loudspeaker set-up

The compact DM models are designed to offer exceptional performance while taking up

minimal space. The mini-monitors will realize their optimum performance when used in

conjunction with a dedicated stand (such as the Dynaudio Stand1, Stand3or Stand4) to

position them at the proper height while absorbing any resonance.

In the event a wall mount is desired, we recommend the Dynaudio WSB1– an

exceptionally sturdy wall mount bracket. It features a solid and sturdy double-jointed steel

construction which facilitates positioning the speaker within a wide range of adjustment.

The wall distance may easily be varied, while the continuously variable vertical tilt allows

a perfect orientation to the listener.

Due to its dimensions, you can also place the loudspeaker on a ledge or shelf or on top

of furniture. Here, the Dynaudio SF1loudspeaker base is ideal, optimizing loudspeaker

performance by positioning the speaker with a slight upward tilt, thus minimizing the

impact of surface reflections on the sound quality. Furthermore, the tilted speakers take

on a very attractive appearance.

In any case, it is important to utilize a stable surface offering a wide enough space in front

of the loudspeakers as to not limit the sound quality and performance. In such applications

or if placing the speakers in enclosed audio/video furniture, the bass reflex port can

usually be left unplugged as long as there is minimal clearance to the boundaries at the

top and rear of the loudspeaker cabinet, as the speakers will measure and perform as

would a front ported version due to the specific tuning of the drivers.

8Dynaudio DM

Positioning

Loudspeaker Toe-In

Depending on your personal listening environment and room dimensions, the

loudspeakers may be angled in towards the listening area to focus the sound radiation.

This positioning will typically improve imaging and is especially recommended by

Dynaudio (see Fig. 5).

Room and furniture influence

The sound quality of any loudspeaker is influenced by the furniture, wall materials and

other objects in the listening room. For example, large rooms without much furniture and

many clean, hard wall surfaces can give a bright and diffuse sound with diverse echoing

frequencies. A room with thick carpet, curtains and soft furniture surfaces will give a

slightly warmer, darker and less lively sound.

Grille

A cloth grille is included and can be affixed to the cabinet to help protect the drivers from

dust and any other influences. The grille is acoustically optimized, but the highest sound

quality levels will be attained without any grille covers in place during listening.

XTo remove the grille, gently pull the grille at all corners straight away from the front.

XTo fit the grille, line up the studs with the corresponding front baffle holes and gently

push the grille in at all corners.

Fig. 5 Angle inwards loudspeakers to improve imaging.

Fig. 6 DM 2/10 with mounted grille.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Dynaudio Sprecher Handbücher

Dynaudio

Dynaudio Air Series Bedienungsanleitung

Dynaudio

Dynaudio Evidence Platinum Bedienungsanleitung

Dynaudio

Dynaudio Center Base2 Bedienungsanleitung

Dynaudio

Dynaudio Audience Bedienungsanleitung

Dynaudio

Dynaudio Stand 3 Bedienungsanleitung

Dynaudio

Dynaudio Focus 380 Bedienungsanleitung

Dynaudio

Dynaudio S4-DVC65 Bedienungsanleitung

Dynaudio

Dynaudio Contour Bedienungsanleitung

Dynaudio

Dynaudio Evidence Bedienungsanleitung

Dynaudio

Dynaudio BM 5A COMPACT Bedienungsanleitung

Dynaudio

Dynaudio Focus Bedienungsanleitung

Dynaudio

Dynaudio IC 17 Bedienungsanleitung

Dynaudio

Dynaudio LYD 5 Bedienungsanleitung

Dynaudio

Dynaudio IP 17 Bedienungsanleitung

Dynaudio

Dynaudio Special Twenty-Five Bedienungsanleitung

Dynaudio

Dynaudio Focus 60 XD Handbuch

Dynaudio

Dynaudio Center Base Bedienungsanleitung

Dynaudio

Dynaudio LYD Bedienungsanleitung

Dynaudio

Dynaudio BM 6A mkII Bedienungsanleitung

Dynaudio

Dynaudio Contour Bedienungsanleitung

Dynaudio

Dynaudio Excite Bedienungsanleitung

Dynaudio

Dynaudio Focus Bedienungsanleitung

Dynaudio

Dynaudio Acoustics BM 5A Bedienungsanleitung

Dynaudio

Dynaudio MC15 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung