Dynaudio LYD Series Bedienungsanleitung

LYD — Series

Operation Manual

Dynaudio Lyd—5

Operation manual

Personal Reference Monitor Table Of Contents

6 Introduction

8 Important safety information

10 Overview

12 Positioning The Speakers

16 Connecting The Speakers

17 Adjusting The Volume

18 DSP Settings

20 Listening Tests

21 Final Tweaks

Table of

contents

Dynaudio Lyd—Series

Welcome and congratulations on your purchase of Dynaudio Personal

Reference Monitors. Each loudspeaker is constructed by Dynaudio

in Denmark to meet very high standards. The speakers are only one

part of your monitoring system. Speakers work together with how

they are placed in the room to create a playback system that delivers

accurate sound reproduction.

Introduction

In this manual you will ﬁnd information on how

best to position both the speakers and listener

to get the best performance from your Dynaudio

loudspeakers. When your speakers are properly

setup and the rear panel settings are optimized,

your mixes will translate better to other playback

systems including home theaters, car stereos,

and headphones.

IntroductionPersonal Reference Monitor

Dynaudio Meter App

Dynaudio has created an iOS app that contains

a source of pink noise, SPL meter, and RTA

spectrum analyzer. This app is designed to assist

you in positioning and calibrating your speaker

system in the listening room.

Other Resources

Please also visit our web site

www.dynaudio.com

You will ﬁnd additional information including:

Questions and answers about Dynaudio products

and technical information

Dynaudio events and news

Things You Will Need

Tape Measure

White String

Marker

Optional

Dynaudio Meter app for iOS devices Figure 1: Dynaudio Personal Reference Monitors

Dynaudio Lyd—Series

Important

safety

information

The lightning ﬂash with an arrowhead symbol

within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “danger-

ous voltage” within the product’s enclosure that

may be of sufﬁcient magnitude to constitute a

risk of electric shock to persons.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manu-

facturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

or other apparatus (including ampliﬁers)

that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third ground-

ing prong. The wide blade or the third

prong are provided for your safety. If the

provided plug does not ﬁt into your outlet,

consult an electrician for replacement of

the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories

speciﬁed by the manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table speciﬁed by the

manufacturer. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tipover.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualiﬁed service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

Safety InformationPersonal Reference Monitor

Warning!

To reduce the risk of ﬁre or electrical shock, do not

expose this equipment to dripping or splashing

and ensure that no objects ﬁlled with liquids, such

as vases, are placed on the equipment.

This apparatus must be earthed.

Use a three wire grounding type line cord like the

one supplied with the product.

Be advised that different operating voltages

require the use of different types of line cord

and attachment plugs.

Always observe the local safety regulations.

Ensure that the factory-set power requirements

for the device (refer to the label on the back of

the monitor) corresponds to the mains supply

in your region.

This equipment should be installed near the

socket outlet and disconnection of the device

should be easily accessible.

To completely disconnect from AC mains, dis-

connect the power supply cord from the AC

receptacle.

The mains plug of the power supply shall remain

readily operable.

Do not install in a conﬁned space.

Do not open the unit – risk of electric shock inside.

Caution:

You are cautioned that any change or modiﬁca-

tions not expressly approved in this manual could

void your authority to operate this equipment

Service:

There are no user-serviceable parts inside.

All service must be performed by qualiﬁed per-

sonnel.

EMC/EMI

This equipment has been tested and found to

comply with the limits for a Class B Digital device,

pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable

protection against harmful interference in resi-

dential installations. This equipment generates,

uses and can radiate radio frequency energy

and, if not installed and used in accordance with

the instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If the equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off an on, the user is encouraged

to try to correct the interference by one or more

of the following measures.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

Consult the dealer or an experienced radio/TV

technician for help.

For customers in Canada:

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

P10

Dynaudio Lyd — Series

Woofer with aluminum voice-coil

The aluminum voice-coil is low mass to achieve

the best transient response. The cone is moulded

as one piece in Magnesium Silicate Polymer.

Soft-Dome Tweeter

Our newest generations coated fabric dome

tweeter. Like all our other drivers made in our

factory in Denmark.

Amplier

The LYD speaker range features an integrated

Class-D ampliﬁer with analog inputs. All connec-

tions and settings are available on the backplate

of the ampliﬁer. Please do not remove the ampliﬁer

yourself. In case of service contact your Dynaudio

dealer.

LYD Speaker The transducers of your Dynaudio LYD speaker will achieve better

sound quality after breaking in. Especially after the ﬁrst hours of use,

you may notice a signiﬁcant advance in sound quality, and further

subtle improvements in subsequent hours of use.

Tripod protector

To protect the sensitive dome from physical

damage, we add the tripod. Do not remove!

The backplate

P11

Product OverviewPersonal Reference Monitor

P12

Dynaudio Lyd—Series

Acoustic Axis

Positioning

the Speakers

In order to get the best performance from your Dynaudio speakers,

care must be taken in positioning them in the listening environment.

The room greatly affects the sound so the position and angle of the

speakers relative to the walls, ceiling and ﬂoor is critical in any listening

environment.

Acoustic Axis

The acoustic axis is an imaginary line passing

through the center point on the speaker and is

used for positioning. This point, shown in Figure

3, should be used for measuring the distance

and angle to the listener. The point is positioned

half the distance between the boundary of the

tweeter and the boundary of the woofer. The

speakers are designed to be positioned vertically

and pointed directly at the listener.

Figure 3 : The acoustic axis

Andere Handbücher für LYD Series

Inhaltsverzeichnis

Andere Dynaudio Sprecher Handbücher

Dynaudio

Dynaudio BM 6A mkII Bedienungsanleitung

Dynaudio

Dynaudio BM 6A mkII Bedienungsanleitung

Dynaudio

Dynaudio Air Series Bedienungsanleitung

Dynaudio

Dynaudio Excite X14A Bedienungsanleitung

Dynaudio

Dynaudio Air Series Bedienungsanleitung

Dynaudio

Dynaudio LYD Bedienungsanleitung

Dynaudio

Dynaudio Stand4 Bedienungsanleitung

Dynaudio

Dynaudio Excite Bedienungsanleitung

Dynaudio

Dynaudio BM 5A COMPACT Bedienungsanleitung

Dynaudio

Dynaudio Contour Bedienungsanleitung

Dynaudio

Dynaudio BM Bedienungsanleitung

Dynaudio

Dynaudio Focus Bedienungsanleitung

Dynaudio

Dynaudio Contour Bedienungsanleitung

Dynaudio

Dynaudio S4-C65 Bedienungsanleitung

Dynaudio

Dynaudio Contour Bedienungsanleitung

Dynaudio

Dynaudio Contour Bedienungsanleitung

Dynaudio

Dynaudio Acoustics BM 5A Bedienungsanleitung

Dynaudio

Dynaudio Special Forty Bedienungsanleitung

Dynaudio

Dynaudio DM Bedienungsanleitung

Dynaudio

Dynaudio BM12A Bedienungsanleitung

Dynaudio

Dynaudio Audience Bedienungsanleitung

Dynaudio

Dynaudio Evidence Platinum Bedienungsanleitung

Dynaudio

Dynaudio Stand1 Bedienungsanleitung

Dynaudio

Dynaudio Focus 60 XD Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung