Eaton CGLine+ Bedienungs- und Wartungsanleitung

CGLine+ Web Controller

CGLine+ Web Compact Controller

Target group: Skilled electricians

Zielgruppe: Elektrofachkraft

Public cible : Électriciens conrmés

Quick Installation Manual /Kurzanleitung / Guide d’installation rapide

ZNO2050500 PrB 03/2020

2Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

Description /

application area

This short instruction manual describes

only a quick commissioning procedure

of the CGLine+ Web Compact Controller.

A complete Installation and Operating

Instuction are downloadable from the

website of the CGLine+ Web Compact

Controller.

Commissioning and

modifying network settings

Please connect a patch cable with RJ45

plugs between the Compact Controller

and a PC (e.g. notebook).

Safety notes

CAUTION

The CGLine+ web interface must be

operated in undamaged and

functional state.

When carrying out maintenance work

with the device the device must be

de-energised.

When carrying out device maintenance,

observe national safety and accident

prevention regulations and the safety

notes in the operating instructions below

designated with .

CYBERSECURITY

This chapter provides guidelines to securely

deploy the CGLine+ Web Compact Controller

and minimize the cybersecurity risk to the

installer system.

• Asset identification and inventory:

Ensure that the CGLine+ Web Compact

Controller is labelled and inventoried

using the Part number and Mac address

printed on the product label, and also

the IP address configured during the

installation of the material and actual

firmware version.

• Restrict Physical access: Ensure that

physical access to the CGLine+ Web

Compact Controller is restricted only

to authorized user(s). CGLine+ Web

Compact Controller

supports the physical access ports RJ-45,

USB that can be used to tamper the

device. Access to these ports should be

restricted to authorized personnel only.

Secure the facility and equipment rooms

or closets with access control mecha-

nisms such as locks, entry card readers,

guards, man traps, CCTV, etc. as appro-

priate. Monitor and log the access at all

times. Before connecting any portable

device through a USB port or SD card

slot, scan the device to prevent unau-

thorized access.

• Restrict Logical access: Access to ‘Admin’

& ‘Service’user accounts should be

restricted to authorized personnel only

as system configuration can be tam-

pered by abusing these accounts. Ensure

password length, complexity and expi-

ration requirements are appropriately

set, particularly for all administrative

accounts (e.g., minimum 10 characters,

mix of upper- and lower-case and spe-

cial characters, and expire every 90 days,

or otherwise in accordance with your

Conformity to standards

Compliant with: EN 60950-1.

Developed, manufactured and tested

according to DIN EN ISO 9001.

Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

organization’s policies).

• Restrict Network Access: Ideally,

CGLine+ Web Compact Controller

should be installed on a segre-

gated network. However, when the

CGLine+ Web Compact Controller

is connected to a wider network,

make sure that the IP address and

MAC address are filtered at the

router side, or using a firewall. In

addition to this, open only the ports

used by the CGLine+ Web Compact

Controller (SMTP as configured, 587

for SMTPS, 443 for HTTPS, and 5000

for OPC communication).

• Logging and event management:

Make sure you log all relevant

system and application events,

including all administrative and

maintenance activities. Logs should

be protected from tampering and

other risks to their integrity (for

example, by restricting permissions

to access and modify logs, transmit-

ting logs to a security information

and event management system,

etc.). Ensure that logs are retained

for a reasonable and appropriate

length of time. Review the logs regu-

larly. The frequency of review should

be reasonable, taking into account

the sensitivity and criticality of the

CGLine+ Web Compact Controller

and any data it processes. The details

how to export the logs are defined

in chapter 7.14.

• Secure maintenance: In case the

firmware of the device needs to be

updated, you will be contacted by

your Eaton local support.

• Business continuity / cybersecurity

disaster recovery: Eaton recom-

mends incorporating CGLine+

Web Compact Controller into the

organization’s business continu-

ity and disaster recovery plans.

Organizations should establish

a Business Continuity Plan and a

Disaster Recovery Plan and should

periodically review and, where pos-

sible, exercise these plans. As part

of the plan, important device data

should be backed up and securely

stored, including the current con-

figuration and documentation of the

current permissions / access con-

trols, if not backed up as part of the

configuration. The CGLine+ PC can

be used to save the configuration of

a CGLine+ Web Compact Controller

using the “save file” button in the

main page.

• Decommissioning: It is a best prac-

tice to purge data before dispos-

ing of any device containing data.

Guidelines for decommissioning

are provided in NIST SP 800-88.

To ensure data is unrecoverable,

CGLine+ Web Compact Controller

must be securely destroyed. Method

of destruction include disintegra-

tion, Incineration, Pulverization, or

Melting of the electronic inside the

CGLine+ Web Compact Controller.

4Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

1. PANEL DESCRIPTION

Left / Back Validate / Select

Cancel / Back

Home

Log out + reactivate the

screen in save mode

Log out + switch off

the screen

Multi-tap keypad

(0: Special characters

#: Uppercase / Lower case)

Switch on/off

the screen

Activate USB

Green : OK

Blinking : Test

Red : Default

Right / Validate

Down

USB cable A-B (option)

230V/AC

2. NETWORK SETTINGS

Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

The CGLine+ Web Compact controller is supplied as standard with the fixed IP address

192.168.1.200.

Operation via dhcp (dynamic IP address assignment) is possible but not factory-activated.

Because typical company networks only permit own-assigned IP addresses, we recommend

configuring network settings via direct connection to a PC, e.g. a notebook.

The network configuration can be done directly on the CGLine+ Web Compact con-

troller. The connection to a PC via a patch cable is optional.

The devices must be in the same subnet, meaning the network card of the PC must be set

to 192.168.1.xxx (not equal to 200), e.g. 192.168.1.50 (subnet to 255.255.255.0).

Settings for gateway and DNS must not be taken into account with a direct connection.

3. FIRST START

CGLine+ Compact

1.User

Select User for choosing a

password.

Enter a password of 10

characters maximum.

Then validate with OK.

11:40

Password

21/01/2020

OkCancel

230V/AC

CGLine+ Compact

2.Administrator

Go back to previous display.

Select Admin for choosing a

password.

Enter a password of 10

characters maximum.

Then validate with OK.

11:40

Password

21/01/2020

OkCancel

The CGLine Web Compact Controller is now ready to be used !

11:40

CGLine+ Compact

Line 1

Line 2

Z2 Z3 Z4

Operation

Blocked

Failure Test

No luminaire

When the CGLine+ Web

Compact Controller starts, a

loading page appears during

3 seconds.

Then, a recap of the entire

installation appears on

screen. You can detect easily

a failure and identify the line

and zone in which the

problem is.

6Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

4. GENERAL CONFIGURATION

aLogin as Admin, with the

password you previously chose.

Then select Commands in the

general menu.

11:40

Admin

21/01/2020

4.Commands

11:40

Password

21/01/2020

OkCancel

4.1. Language setting

password you previously chose.

Then select Configuration in

the main menu.

11:40

Password

21/01/2020

OkCancel

11:40

Admin

21/01/2020

3.Configuration

11:40

Admin

21/01/2020

>Configuration

1.General

2.Test

3.Input

4.Output

5.Network

6.Email

7.Address

Select

11:40

Admin

21/01/2020

>Configuration->General

1.Name

2.Password change

3.Time

4.Date

5.Language

Select

11:40

Admin

21/01/2020

>Configuration->General->Language

1.English

2.Français

3.Deutsch

4.Italian

5.Portuguese

6.Nederlands

Save

Select General and then

choose Language in the next

menu.

Select the language you need,

and then select Save for saving

your choice.

4.3. Initialisation of luminaires

4.2. Date and time setting

Stay in the General menu, and

select Time for updating the

time, and Date for updating

the date.

Select Save for saving the

updates.

11:40

Admin

21/01/2020

Controller date (dd/mm/yyyy)

Save

21/01/2020

Cancel

11:40

Admin

21/01/2020

Controller time (hh:mm)

Save

11:40

Cancel

Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

bEnter Initialisation commands,

and then choose All lines.

11:40

Admin

21/01/2020

>Commands

1.Addressed commands

2.Initialisation commands

3.Adaptive Evacuation

Select

11:40

Admin

21/01/2020

>Initialisation commands

1.All lines

2.Line 1 ( 5 Luminaire)

3.Line 2 (0 Luminaire)

Select

11:40

Admin

21/01/2020

Operation in course

Line_1 : 5 Line_2 : 0

Select Search all lamp, and wait

for the complete loading.

Check the number of lamps, and

click on .

dOPTIONAL : You can change the

dates of automatic tests.

Go back to main menu, and

select Configuration.

Then select Te s t .

11:40

Admin

21/01/2020

3.Configuration

11:40

Admin

21/01/2020

>Configuration

1.General

2.Test

3.Input

4.Output

5.Network

6.Email

7.Address

Select

Select the test group you want

to update.

Choose the type of test, and

configure the new test time.

11:40

Admin

21/01/2020

>Configuration->Test group 1

1.Function test

2.Duration test

Select

11:40

Admin

21/01/2020

>Next functional test

1.Time : 18:00

2.Date : 01/01/2099

3.Test period : 07 days

4.Save

Select

Once the test features are

updated, select Save.

11:40

Admin

21/01/2020

>Next functional test

1.Time : 18:00

2.Date : 01/01/2099

3.Test period : 07 days

4.Save

Select

Conguration Saved

eThe CGLine+ Web Compact Controller is configured with basic settings. For all

configuration details, please see refer to CGLine+ Web Compact Controller user

manual.

If one or more luminaires are

missing, please refer to complete

user manual.

8Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

5. PC NETWORK CARD SETTING

Mark the entry Internet protocol

version 4 1, then continue with

“Properties” 2.

PC network card setting:

To modify the network settings of the PC open the system control

Network and release centre

Modify adapter settings

Right mouse click on “LAN connection”

Properties.

The following screen is displayed:

Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

Usually the network card is on DHCP, i.e. “Automatically reference IP address”.

Modify the entry to “Use the following IP address”and specify the following

values for the IP address and the subnet mask (displayed automatically):

IP address: 192.168.1.50

Subnet mask: 255.255.255.0

Clicking on OK assumes the settings so that the web page of the CGLine+ Web Compact

Controller can now be opened via any web browser, e.g. Firefox. Open a web browser and

enter the IP address“https://192.168.1.200” into the address bar.

The network card modifications should be reset following configuration of the network set-

tings of the web controller.

The start screen of the CGLine+ web controller now opens.

A login 1is necessary. Two accounts are available:

1. User:Admin Password:Enter the password you chose for Admin

2. User:User Password: Enter the password you chose for User

To modify the network settings, please login as Admin.

CGLine+ Compact

2.Administrator

10 Quick installation manual CGLine+ Web Compact Controller ZNO2050500 PrB 03/2020 www.eaton.com

Before accessing the webserver, two security pages are displayed on the browser by

security protocols.

The following web pages appear:

Click on Continue to this website on the first page.

Click on Advanced on the second page, and then on Add Exception.

IMPORTANT

A certificate error message can be displayed during the first connection to the controller

website.

Confirm by clicking on Continue to reach the login page. For installing the certificate, click

on CA certificate on the left.

The certificate can now be imported via your browser. The steps to follow can be different

according the browser you use (watch tutorial videos on videos.eaton.com).

The function of the website is also given without certificate, but it will alway require the

confirmation of this security notice.

Andere Handbücher für CGLine+

Inhaltsverzeichnis

Sprachen:

Andere Eaton Controller Handbücher

Eaton

Eaton SVCH0203 SPX Advanced Gebrauchsanweisung

Eaton

Eaton CDAU-01/04 Bedienungsanleitung

Eaton

Eaton AutoVAR 600 Bedienungsanleitung

Eaton

Eaton xComfort CDAE-01/01 Bedienungsanleitung

Eaton

Eaton A201 Handbuch

Eaton

Eaton Cutler-Hammer DS6 Series Handbuch

Eaton

Eaton Cutler-Hammer Jockey Bedienungsanleitung

Eaton

Eaton xComfort CAAE-01/01 Bedienungsanleitung

Eaton

Eaton Power XL DG1 Series Bedienungsanleitung

Eaton

Eaton Cutler-Hammer S801TR Bedienungsanleitung

Eaton

Eaton xComfort CRCA-00/10 Gebrauchsanweisung

Eaton

Eaton xComfort CDAE-01/01 Bedienungsanleitung

Eaton

Eaton SC100 Bedienungsanleitung

Eaton

Eaton DS7 Series Handbuch

Eaton

Eaton DS7 Series Bedienungsanleitung

Eaton

Eaton A200 Handbuch

Eaton

Eaton A200 Handbuch

Eaton

Eaton DILM12-XPBC Handbuch

Eaton

Eaton Xcomfort CSAU-01/01 Bedienungsanleitung

Eaton

Eaton ELC Series Bedienungsanleitung

Eaton

Eaton FDF120 Gebrauchsanweisung

Eaton

Eaton CGLine+ Touchscreen Controller Bedienungsanleitung

Eaton

Eaton Cutler-Hammer W200 Bedienungsanleitung

Eaton

Eaton SV9000 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch