Eaton POW-R-COMMAND 1000 Bedienungsanleitung

PXM1000 User’s Guide

December 30, 2017

Eaton Corporation

Contents

1. Welcome to PXM1000 .........................................................................................2

2. Getting Started..................................................................................................3

2.1. New Connection......................................................................................3

2.2. Connection Settings ................................................................................3

2.3. Add New Device......................................................................................4

2.4. Connection.............................................................................................5

2.5. Getting Help ...........................................................................................5

3. User Interface ...................................................................................................6

3.1. Main Window ..........................................................................................6

3.2. Main Menu .............................................................................................6

3.3. Toolbar ..................................................................................................8

4. Functions ..........................................................................................................9

4.1. Basic Monitoring .....................................................................................9

4.2. Device Management ................................................................................9

4.3. Data Logging........................................................................................ 10

4.4. Import/Export Device Profile ..................................................................16

4.5. PXM1000 Series.................................................................................... 17

4.5.1. Readings ..................................................................................... 17

4.5.2. Settings ...................................................................................... 22

5. Troubleshooting ............................................................................................... 28

6. Installation...................................................................................................... 29

6.1. Installing ............................................................................................. 29

6.2. Uninstalling .......................................................................................... 29

6.3. System Requirements............................................................................ 29

1. Welcome to PXM1000

Developed by Eaton Corporation, PXM1000 software is designed for the PXM 1000 series

power meters.

PXM1000 software provides user-friendly real-time monitoring and data logging

features for energy saving and power quality analysis. The purpose of this software is to

provide a tool for users to monitor multiple parameters continuously and it allows users

to monitor and maintain the meter on a real-time basis.

2. Getting Started

2.1.New Connection

A connection is required before communicating with the meter. To add a new

connection, do one of the following:

1) Click Settings > Connection Manager.

2) Click the icon .

The Connection Manager is shown as Figure 2.1.

Figure 2.1. Connection Manager

New: Add a new connection.

Delete: Delete the selected connection.

Edit:

Edit

the selected connection settings.

Close: Close the window.

Status:

'Available' means

Com Port

Ethernet

is active, and 'Not Available'

means

Com Port

Ethernet

is inactive. If the status is blank, it means that

Com

Port

Ethernet

has not been established.

2.2.Connection Settings

Set the connection parameters. The New Connection box is shown as Figure 2.2.

Figure 2.2. New Connection

Name:

Give connection a name.

Type:

Select Serial Port for RS485; Select Network for Modbus TCP gateway (for

example, PXM1000 + PXM1000-MTCP).

Com Port:

Select the serial port that the RS485 connection is using.

Baud Rate:

Should match the baud rate in the meter settings.

Scan Interval:

Used to adjust the time interval between two messages (200ms or

500ms is recommended).

2.3.Add New Device

After performing steps 1 and 2, you need to add a device to communicate with.

To add

a new device, do one of the following:

1) Click Operation > Add Device.

2) Click the icon .

The Add Device box is shown as Figure 2.3.

Figure 2.3. Add Device

Device Type:

The model of the device you are going to communicate with.

Connection:

Select a connection for the communication.

Device Address:

Should match the address in the meter settings.

Description:

Device description such as where the device is used, for example,

“Building 1”.

2.4.Connection

You can read all the measurement data after you successfully complete Step 3.

connect, do one of the following:

1) Click Operation > Connect.

2) Click the icon .

3) Press F9 on keyboard.

Notice:

If you cannot start communication normally, please make sure the physical

connection of the device is correct and the communication setting parameters are

properly configured.

2.5.Getting Help

For more information, do one of the following:

1) Click Help > Help.

2) Click the icon .

3. User Interface

3.1. Main Window

Figure 3.1. Main Window

The main window includes a menu bar, a toolbar, a workspace and a status bar. The

workspace displays meter windows. The status bar displays messages. As shown in

Figure 3.1, the following includes a description of all items:

A -- Menu bar

B -- Toolbar

C -- Window title: Displays connection, device address, device description, connection

status, etc

D -- Explorer bar

Allows for quick browsing of the meter functions.

E --

Data area:

Displays data related to meter functions or available operations for user

to perform.

F --

Communication:

Displays sent/received messages and indicates communication

errors (which means the number of

faulty

devices) in the monitoring state.

3.2. Main Menu

The Main menu includes Operation, Settings, Tools, Window and Help.

3.2.1. Operation

Connect:

Connect to the device, read data and allow write command.

Disconnect:

Disconnect the device, stop data reading and disallow write

command.

Start Data Logging:

Record data at the set logging interval.

Stop Data Logging:

Stop recording.

Add Device: Add a new device that is going to be connected.

Delete Current Device:

Delete current active device. If multiple windows are tiled,

it deletes the device of the top window.

Exit: Quit the application.

3.2.2. Settings

Connection Manager:

Manage connections and edit connection parameters.

Data Log Settings:

Check and set data logging parameters of each device that is

going to be monitored.

Options:

Check and set some of the advanced options

Device Manager:

Show the detailed communication status.

Device Properties:

Modify device description while connected; modify device

address while disconnected.

Connection Settings:

Modify the connection settings of current active device.

Explorer Bar: Show or hide the explorer bar.

Text Size:

Set text size of the data area.

3.2.3. Tools

Import Device Profile:

Load the settings into the current active device window from

an existing device profile.

Export Device Profile:

The device profile of the current active device window can be

saved as a file.

Import and Update Device:

Load and send all settings in the current active

device

window to the meter.

Find Device: Search on-line for meters in LAN.

Calculate Pulse Constant: A small tool for calculating pulse constant.

3.2.4. Window

Tile Horizontally: Rearrange all windows in the tile horizontally.

Tile Vertically: Rearrange all windows in the tile vertically.

Cascade: Rearrange all windows in a cascade.

Minimize All: Minimize all windows.

3.2.5. Help

Help: Display help document.

About: Display the software version and copyright information.

3.3. Toolbar

Connect: Connect device, read data and allow write command.

Disconnect: Disconnect device, stop data reading and disallow write command.

Start Data Logging:

Record data at the set logging interval.

Stop Data Logging:

Stop recording.

Add Device:

Add a new device that is going to be connected.

Delete Current Device:

Delete current active device. If multiple windows are tiled,

it deletes the device of the top window.

Connection Manager:

Manage connections and edit connection parameters.

Data log Settings:

Check and set data logging parameters of each device that is

going to be monitored.

Options:

Check and set some of the advanced options

Device Manager:

Show the detailed communication status.

Device Properties:

Modify device description while connected; modify device

address while disconnected.

Connection Settings: Modify the connection settings of current active device.

Text Size:

Set text size of data area.

Tile Horizontally:

Rearrange all windows in the tile horizontally.

Tile Vertically:

Rearrange all windows in the tile vertically.

Cascade:

Rearrange all windows in a cascade.

Minimize All: Minimize all windows.

Explorer Bar:

Show or hide the explorer bar.

Help: Display help document.

4. Functions

4.1. Basic Monitoring

4.1.1. Add new connection. Refer to the New Connection section.

4.1.2. Set connection parameters. Refer to the Connection Settings section.

4.1.3. Add device window. Refer to the Add New Device section.

4.1.4. Connect. Refer to the Connection section.

4.1.5.

Click the node in menu tree on the left side to view the measured values. The

content displayed in the device window may be different according to different

device types.

4.1.6.

Click

Disconnect

menu or icon to stop.

4.2. Device Management

4.2.1. Add a new device. Refer to the Add New Device section.

4.2.2.

If there is an unused device window, select it and click

Device Properties

or icon to make the device status ‘available’.

4.2.3.

If a window is no longer needed, click

Delete Current Device

menu or icon.

4.2.4. Device Manager

1) Click Settings > Device Manager.

2) Click the icon .

The Device Manager box is shown as Figure 4.3.

Andere Handbücher für POW-R-COMMAND 1000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Eaton Messgerät Handbücher

Eaton

Eaton Crouse-Hinds Z130 Bedienungsanleitung

Eaton

Eaton 1MM Bedienungsanleitung

Eaton

Eaton K1650 Bedienungsanleitung

Eaton

Eaton IQ 35M Series Bedienungsanleitung

Eaton

Eaton PXM 4000 Bedienungsanleitung

Eaton

Eaton Durant Eclipse Series Bedienungsanleitung

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton xComfort CSEZ-01/06 Handbuch

Eaton

Eaton KK650 Bedienungsanleitung

Eaton

Eaton PXG 900 Bedienungsanleitung

Eaton

Eaton CMD(24VDC) Bedienungsanleitung

Eaton

Eaton Moeller Series Bedienungsanleitung

Eaton

Eaton PXM4K Series Bedienungsanleitung

Eaton

Eaton EMV600 Bedienungsanleitung

Eaton

Eaton CMD Handbuch

Eaton

Eaton SONiX Pm10 Bedienungsanleitung

Eaton

Eaton GIM 60 Bedienungsanleitung

Eaton

Eaton PXM 2250 Bedienungsanleitung

Eaton

Eaton LifeSense Bedienungsanleitung

Eaton

Eaton Crouse-Hinds MTL Z230 Bedienungsanleitung

Eaton

Eaton PDI WaveStar Infinity 2 Bedienungsanleitung

Eaton

Eaton Power Xpert PXM 4000 Bedienungsanleitung

Eaton

Eaton Crouse-hinds series Bedienungsanleitung

Eaton

Eaton PXM4K Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung