Eaton 93PM IBC-L Bedienungsanleitung

Eaton 93PM Cabinet Seismic Tie Strap Installation Instructions

Use these instructions to install cabinet top and rear seismic tie straps to secure the Uninterruptible Power

Supply (UPS) and Sidecar Integrated Accessory Cabinet (SIAC), and when installed in a line-up-and-match

configuration the Integrated Battery Cabinets (IBCs) and Integrated Accessory Cabinets (IACs).

To install the tie straps:

1. Unload and mechanically install the UPS and IBCs, and if applicable IACs, according to the instructions in

the applicable installation and operation manual.

2. Remove the screws along each adjacent cabinet top panel securing the top panels (see Figure 1). Retain

the hardware for later use.

3. Install top tie strap between each UPS, IBC, IAC, and SIAC (see Figure 1). Secure the tie strap with

retained hardware.

4. If the long rear shipping bracket (tie strap) is installed between the UPS and an SIAC and no

line-up-and-match IBC or IAC is installed, proceed to Step 7; otherwise, proceed to Step 5.

5. Remove the screws along each adjacent cabinet (UPS, SIAC, IBC, or IAC) rear panel securing the cabinet

rear panels (see Figure 1). Retain the hardware for later use.

6. Install rear tie strap between each UPS, IBC, IAC, and SIAC (see Figure 1). Ensure strap is installed at the

top of the cabinet. Secure the tie strap with retained hardware.

7. Installation is complete.

For More Information

Refer to the applicable Eaton 93PM Installation and Operation manual for the following additional information:

lInstallation instructions, including site preparation, planning for installation, wiring and safety information,

and detailed illustrations of cabinets with dimensional and connection point drawings

Visit www.eaton.com/powerquality or contact an Eaton service representative for information on how to obtain

copies of these manuals.

Getting Help

If help is needed with any of these instructions, please call the Customer Reliability Center at:

United States: 1-800-843-9433

Canada: 1-800-461-9166 ext 260

All other countries: Call your local service representative

Please use the following e-mail address for comments, suggestions, or to report an error in these instructions:

E-ESSDocumentation@eaton.com

NOTE Refer to the applicable installation and operation manual supplied with the UPS,

SIAC, IBC, or IAC for dimensions and required clearances.

Seismic Tie Straps (part of Seismic Mounting Bracket Kit)

Top Tie Strap (Only provided with UPS kits. Strap is provided as standard with IACs. and IBCs) 1

Rear Tie Strap 1

2 Eaton 93PM Cabinet Seismic Tie Strap Installation Instructions P-164000471—Rev 1 www.eaton.com/powerquality

Figure 1. Typical Top and Rear Seismic Tie Strap Installation

Eaton is a registered trademark of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are

property of their respective companies.

reproduced in any way without the express written approval of Eaton Corporation.

*P-164000471 1*

P-164000471 1

Cabinet Top

Seismic Tie Strap

Cabinet Rear

Seismic Tie Strap

Andere Handbücher für 93PM IBC-L

Inhaltsverzeichnis

Andere Eaton UPS Handbücher

Eaton

Eaton 9125 Two-in-One UPS 2500 Bedienungsanleitung

Eaton

Eaton 9SX Series Bedienungsanleitung

Eaton

Eaton Powerware BladeUPS Kurzanleitung

Eaton

Eaton 93E60KMBSN Handbuch

Eaton

Eaton Powerware 5110 Bedienungsanleitung

Eaton

Eaton Ellipse PRO 650 Bedienungsanleitung

Eaton

Eaton Powerware 9395 Handbuch

Eaton

Eaton Tripp Lite Series SmartPro Series Montageanleitung

Eaton

Eaton Powerware 9390 Bedienungsanleitung

Eaton

Eaton 5E 500 Bedienungsanleitung

Eaton

Eaton 91PS Handbuch

Eaton

Eaton Powerware 9395 Handbuch

Eaton

Eaton EL800USBIEC Bedienungsanleitung

Eaton

Eaton 9910-E16 Bedienungsanleitung

Eaton

Eaton EX EXB 1000 Bedienungsanleitung

Eaton

Eaton Pulsar Series Bedienungsanleitung

Eaton

Eaton EX RT 7 Bedienungsanleitung

Eaton

Eaton Powerware 5125 Bedienungsanleitung

Eaton

Eaton 5S Bedienungsanleitung

Eaton

Eaton 9PX5KP1 Montage- und Bedienungsanleitung

Eaton

Eaton BladeUPS none Bedienungsanleitung

Eaton

Eaton Ellipse PRO 1600 FR Bedienungsanleitung

Eaton

Eaton 9PX 1000i RT2U Bedienungsanleitung

Eaton

Eaton Powerware 9395 Bedienungsanleitung

Beliebte UPS Handbücher anderer Marken

Pylontech

Pylontech Victron & Pylontech US5000 Bedienungsanleitung

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung

Mecer

Mecer ME-1000-WTU Bedienungsanleitung

Mustek

Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch

Emerson

Emerson Liebert NXL series Bedienungsanleitung

MAKELSAN

MAKELSAN BOXER SERIES Bedienungsanleitung

Block

Block PC-0524-400-0 Bedienungsanleitung

CyberPower

CyberPower CP585LCD Bedienungsanleitung

CyberPower

CyberPower Office Tower Series UPS 1000 Bedienungsanleitung

CyberPower

CyberPower BM100 Bedienungsanleitung

Best Power

Best Power 610 Bedienungsanleitung

Best Power

Best Power Unity/I UT3K Bedienungsanleitung

Mustek

Mustek PowerMust 400 Offline Bedienungsanleitung

Xantrex

Xantrex Trace 512 UR-UPS Bedienungsanleitung

Forza

Forza SL-1501UL Bedienungsanleitung

LEGRAND

LEGRAND keor 310081 Bedienungsanleitung

ABB

ABB Conceptpower DPA 500 Bedienungsanleitung

ZincFive

ZincFive BC Series Bedienungsanleitung