EAW KF910 Bedienungsanleitung

SPECIFICATIONS KF910

PHYSICAL

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. KF910/888056(A)/2 pp 1/29/99 Printed in USA

DESCRIPTION

PERFORMANCE

APPLICATION

A dedicated PPST long throw high frequency system in a

trapezoidal enclosure. Includes 5x 2-in exit compression driv-

ers on SimplePhase™ horns.

The KF910 PPST long throw HF module is engineered for use

in KF900 Series arrays. It provides HF coverage from 0° to 15°

below the array. It is engineered to provide extended high fre-

quency response at distances in excess of 600 ft. KF900 Series

modules can only be used in arrays and must be integrated

with complex PPST processing. Six year warranty.

Applications include:

Stadiums Concert Tours

Frequency Response (1 Watt @ 1m)

±3 dB 500 Hz to 14 kHz

-10 dB 400 Hz to 2 16 khz

Efficiency/Axial Sensitivity (dB SPL, 1 Watt @ 1m)

HF 117

Impedance (Ohm) HF 5x 8

Power Handling, AES Standard (Watts)

HF 5x 200

Recommended Amplifier Power (Watts)

HF 5x 400

Calculated Maximum Output (dB SPL)

HF Peak 153.0

HF Long Term 146.0

Nominal Coverage Angle/-6 dB points (degrees)

Horizontal 30

Vertical Beam profile adjustable via PPST

processing

Recommended Complementary Systems

Sub KF940

LF KF930

Mid/High KF920/KF911

Part Number 999522

HF Subsystem & Loading 5X 2-in exit compression drivers

on 30°(H) SimplePhase horns

System Configuration Dedicated HF, long throw

Powering Configuration Active processing

System Crossover 800 Hz to 1300 Hz

Controls (switches, knobs) None

Recommended High-Pass

Frequency (24 dB/Octave) 1250 Hz, 500 Hz minimum

Cabinet Type (shape) Trapezoidal

Enclosure Materials Baltic birch plywood

Finish Black catalyzed polyurethane

Connectors One each male and female AP6,

2x Neutrik NL4 Speakon

Suspension Hardware (16) 3/8”-16 threaded mounting

suspension points (4 each top,

bottom and sides)

Grille Vinyl coated perforated steel,

foam backed

Dimensions inches millimeters

Height 46.00 1168

Width (Front) 30.00 762

Width (Rear) 8.56 217

Depth 40.00 1016

Trapezoid Angle 15°per side

Weights pounds kilograms

Net Weight 288 131.0

Shipping Weight 293 133.3

Prototype shown with temporary hardware

SPECIFICATIONS KF910

DIMENSIONAL DRAWING

INPUT PLATE

A & E SPECIFICATIONS

One Main Street, Whitinsville, MA 01588 508 234 6158 Toll Free 800 992 5013 FAX 508 234 8251 info@eaw.com www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice. KF910/888056(A)/2 pp 1/29/99 Printed in USA

Manufacturing tolerances are +/-0.13 and +/-1°

15.83

7.00

4.50

8.58

23.00

18.25

30º

40.00

30.00

42.00

46.00

10.81

8.58

8.75 16.75

22.00

KF910 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED

FRONT BACK

TOP RIGHT SIDE/VIEW A-A

510497 (1)

EXP 9/4/97 SHB

The long throw high frequency module shall incorporate 5x

horn-loaded 2-in exit compression driver HF transducers. The

module shall have a nominal horizontal coverage pattern of

30°. The module’s vertical beam profile shall be adjustable via

complex digital signal processing. The module shall be inte-

grated with complementary frequency-specific modules into a

single acoustical unit via complex digital signal processing.

Module frequency response shall vary no more than ±3 dB

from 500 Hz to 14 kHz measured on axis. The module shall

produce a Sound Pressure Level (SPL) of 117 dB SPL on axis

at 1 meter with a power input of 1 Watt, and shall be capa-

ble of producing a peak output of 153 dB SPL on axis at 1

meter. Each driver shall handle 200 Watts of amplifier power

(AES Standard) and shall have a nominal impedance of 8

Ohms.

The loudspeaker enclosure shall be trapezoidal in shape. It

shall be constructed of 1/2-in thickness void-free cross-grain-

laminated Baltic birch plywood and shall employ extensive

internal bracing. It shall be finished in black catalyzed

polyurethane. Input connectors shall be one each male and

female AP6 plus two Neutrik NL4 Speakon. The enclosure shall

include sixteen 3/8”-16 threaded mounting/suspension

points (4 each top, bottom and sides). The front of the loud-

speaker shall be covered with a vinyl coated perforated steel

grille backed with open cell foam to protect against dust.

The long throw high frequency module shall be the EAW model

KF910.

470540 (A) KF910

KF910

S/N

PIN 1

PIN 1 HF D

HF D

- ...

+... --

+PIN 2

PIN 2 HF E

HF E

- ...

+... --

CANNON

PIN 1

PIN 2 HF A

HF A

...

... --

+PIN 5

PIN 6 HF C

HF C

...

... --

PIN 3

PIN 4 HF B

HF B

...

... --

NEUTRIK

NL 4 MPR

NEUTRIK NEUTRIK

NL 4 MPR

NEUTRIK

AP6-FEMALE

AP6-MALE

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung