6
Inspect the test leads for damaged insulation or
exposed metal. Chec test lead continuity. Damage
leads must be replaced. Do not use the phase
Rotation indicator if it loo s damaged.
Be careful when wor ing above 30V ac rms,
42V ac pea and 60V dc. Such voltages pose a
shoc hazard.
When using the probes, eep fingers away
from probe contacts. Keep fingers behind the finger
guards on the probes.
Measurements can be adversely affected by
impedances of additional operating circuits
connected in parallel or by transient currents.
Verify operation prior to measuring hazardous
voltages (voltages above 30V ac rms, 42V ac pea
and 60V dc).
Do not use the phase Rotation indicator with
any of the parts removed.
Do not use the phase Rotation indicator around
explosive gas, vapor, or dust.
Do not use the phase
Rotation indicator in a
wet environment.
