Ecler EMOTUS5OD Bedienungsanleitung

eMOTUS5OD

WALL-MOUNT LOUDSPEAKERS

Outdoor loudspeaker

USER MANUAL

CONTENT

Important note 3

Precautions 3

Introduction 4

Key features 4

Connecting 4

Positioning, fitting and start-up 5

Technical specifications 7

Rear panel 7

Packing content 8

IMPOR TANT NOTE

Congratulations. You now own the result of a well-designed, carefully produced

manufacture. We thank you for your trust by having chosen our eMOTUS5OD

outdoor loudspeaker.

To achieve its maximum working order and performance, it is VERY IMPORTANT,

before connecting, to read this manual carefully. To guarantee optimum working

order, we recommend that maintenance be carried out by our authorized Technical

Services.

PRECAUT ION S

Read these instructions

Keep these instructions

Pay attention to all the warnings

Follow all the instructions

Do not use this system near water

Clean only with a dry cloth

Install following the manufacturer’s instructions

Do not install near sources of heat such as radiators or heaters.

Only use the accessories specified by the manufacturer.

In the event of any repair, contact a qualified technical service.

Warning: misuse of the device may cause harm, death or

damage the system.

INTROD UCTI ON

eMOTUS5OD is a 5” loudspeaker designed for installing outdoor. A compact,

professional loudspeaker with great performance at a highly attractive price. Its

fantastic performance and unique design mean that it can easily be integrated into a

wide range of applications: theme parks, urban spaces, gardens, etc. Available in

black and white.

KEY FEATU RES

• 2-way cabinet, 5" woofer and 1" tweeter

•40WRMS @ 8Ω

• Power selector: 3,75 / 7,5/ 15 / 30W @ 100V & 8Ω position

• Outdoor design

• IP65 rated

• Back rubber cover for connections

• Available in black and white colour

CONNEC TIN G

eMOTUS5OD accepts high or low impedance. In this regard, on the rear panel, there

is a 5-position switch for selecting your work mode. The first 4 positions allow for

the system to operate in high impedance, and the fifth, in low impedance. (*) The 4

positions on the power selector for a 100V line will make it possible to set the

maximum power with which each unit will operate. So, in areas where a low sound

level is needed, the lower positions will be used (3.75 to 7.5W), whereas in areas

where a higher level is required, the upper positions (15 or 30W) will be used.

N.B. In the event of using the loudspeaker in installations at 70V, the power ratings

for the 100V position will be reduced to half of those indicated on the connector

terminals. In the case of 50V installations, they will be reduced to a quarter.

The fifth position corresponds to operating in low impedance (8) and a maximum

power of 40 WRMS. In the event of adopting this set up, the limitations of the

amplifier must be taken into account by connecting several loudspeakers to the

output, particularly if the impedance of the unit falls below 4. Also, it is important

to ensure that the connection cable joining the amplifier outputs and the

loudspeakers are good quality, and as short as possible. This becomes especially

important when the distances to cover are considerable and the impedance of the

loudspeakers is low.

(*) N.B. The speaker distribution system on a 100V/70V line historically arises from

the technical need to mix loudspeakers with different impedances and/or power

ratings on the same line or amplifier channel, all without the need to be concerned

about the total impedance of the resulting unit. In addition to that, this solution

makes it possible, with minimum losses of power, to use long stretches of cable and a

slightly shorter section than that normally used in a low impedance installation.

CAUTION!

eMOTUS5OD is delivered by default with the switch in the 100V/30W position. If the

system is accidentally connected to an amplifier with a low impedance output,

no damage will be done to the loudspeaker, but it will perform well below its

capacity. In the event of accidentally connecting the loudspeaker to a 100V

network with the switch in the 8position, it will be seriously damaged.

POSIT IONIN G,FITT ING A ND START -UP

In the packing of eMOTU5OD, you will find all that is needed to complete installation

of the unit.

The following should be observed as general rules:

Always install on solid, firm surfaces.

For good sound reproduction, there should be no hindrance between the

units and the audience.

Adjust the levels of sound pressure to reproduction requirements. Despite

its small size, the eMOTUS5OD has a performance far higher than that of

domestic loudspeakers.

Procedure for installing on a surface:

1. Make three 6 mm drill holes in the wall, lining them up with the position of

the holes in the bracket.

2. Insert three 6 mm wall plugs in these holes.

3. Fasten the safety line on the back of the bracket.

4. Place the bracket in position, after first passing the line and the loudspeaker

cable through the square hole on the bracket. Fix the bracket to the wall.

Connect the loudspeaker cable to the connector on the rear part of the box,

using the Euroblock connector supplied. Ensure the correct polarity of the

terminals and that the cable goes through the square hole in the bracket. It is

advisable to place the protective housing supplied when the loudspeaker is

installed outdoors.

5. Place the acoustic box in its final position, vertically sliding it downward so

that the rail on its rear side fits with the bracket rail. Fasten the safety cable

on the rear part of the acoustic box, to avoid it accidentally falling and

causing material and/or personal damage.

6. Orientate the box to obtain the required position on the vertical and

horizontal axes. Tighten the Allen screws on the bracket to fix said position

on both axes.

7. Adjust the power selector to the required position.

REAR PANEL

1. 2-terminal Euroblock connector

2. Attachment point for the safety cable

3. Power selector

TECHNICA L SPECIFICA TIO NS

eMOTUS5OD

Power

40 WRMS / 80 W Program

Impedance

8 Ω / 100V

Power selector

30W / 15W / 7.5W / 3.75W & 8Ω

Frequency response (±10dB)

85Hz –20kHz

Construction

Aluminum grill, ABS cabinet

Dimensions (WxDxH)

173x181x180mm - Not including brackets; 173x248x180mm -

Including brackets

Weight

4.8 kg –Not including accessories;

5.3 kg –Including accessories

PACKI NG C ONTENT

2 x eMOTUS5OD loudspeakers

2 x articulated brackets for wall mounting

5mm Allen key

2 x metal safety lines against any possible flaking off, with

corresponding screws and lock washers.

8 x adhesive legs for positioning the loudspeakers on a desktop

Rear connection housing for outdoor use

Quick reference guide

Warranty card

All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the

design or manufacturing that may affect these product specifications.

Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 [email protected] www.ecler.com

Andere Handbücher für eMOTUS5OD

Inhaltsverzeichnis

Andere Ecler Sprecher Handbücher

Ecler

Ecler DROP6 Bedienungsanleitung

Ecler

Ecler PHS20T Bedienungsanleitung

Ecler

Ecler IC6CLASS-54 Bedienungsanleitung

Ecler

Ecler IC6CLASSI Bedienungsanleitung

Ecler

Ecler IC Series Bedienungsanleitung

Ecler

Ecler eIC5154 Bedienungsanleitung

Ecler

Ecler VIC6 Bedienungsanleitung

Ecler

Ecler NEST106 Bedienungsanleitung

Ecler

Ecler LABI1 Series Bedienungsanleitung

Ecler

Ecler eMOTUS8OD Bedienungsanleitung

Ecler

Ecler TRAIL103 Bedienungsanleitung

Ecler

Ecler AUDEO103 Bedienungsanleitung

Ecler

Ecler DACORD SB208 Bedienungsanleitung

Ecler

Ecler AMIC24 Bedienungsanleitung

Ecler

Ecler eMOTUS5OD Bedienungsanleitung

Ecler

Ecler TRAIL103 Bedienungsanleitung

Ecler

Ecler NIMBO-24 Bedienungsanleitung

Ecler

Ecler IG108 Bedienungsanleitung

Ecler

Ecler IC SB10 Bedienungsanleitung

Ecler

Ecler WiSpeak TUBE3WH Bedienungsanleitung

Ecler

Ecler ARQIS 108BK Bedienungsanleitung

Ecler

Ecler ePHS20T Bedienungsanleitung

Ecler

Ecler eUC106 Bedienungsanleitung

Ecler

Ecler IW103 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung